The 3x50 Avenger Gen II Night Vision Weapon Sight from Bering Optics is a close to mid-range optic for tactical use in low light or complete darkness. This NVD is equipped with a Gen 2+ intensifier tube that is capable of up to 64 lp/mm resolution, delivering more definition and contrast than previous generation image intensifiers. Automatic Brightness Control maintains the image brightness at an optimal level and produces relatively constant image quality in dynamic light conditions. A red-illuminated floating Mil Dot reticle offers enhanced contrast against the green night vision image and assists the shooter with range and holdover estimation.

This configuration of the Avenger weapon-mounted optic has 3x magnification and f/1.5 light gathering ability, enabling adequate light transmission for effective targeting under moonlight. For indoor use or when operating under heavy cloud cover, the Avenger's built-in 25mW infrared illuminator is capable of lighting a subject up to 55 yd away. This NVD also has a manual focus objective capable of focusing to within 10 yd and an accessory side rail that supports an additional tactical accessory, such as a long-range IR illuminator or laser aiming device. An IPX4-compliant, water-sealed housing makes the Avenger NVD ready to perform in light rain, high humidity, and even freezing temperatures.

Gen 2+ Image Intensifier    57 lp/mm Typical Resolution    Automatic Brightness Control    Built-In 25mW 850nm IR Illuminator    1/8 MOA Impact Point Correction    80mm f/1.5 Lens System, Manual Focus    IPX4 Water-Resistant Housing    Picatinny / Weaver Rail Mount    Accessory Picatinny / Weaver Side Rail    Illuminated Red-on-Green Mil Dot Reticle

• Gen 2+ intensifier tube
• 57lp/mm typical resolution, 64lp/mm maximum
• Automatic Brightness Control

• 3x magnification, 50mm objective
• 80mm f/1.5 lens system
• 13° angle of view
• 50mm eye relief
• Illuminated red-on-green floating Mil Dot reticle

• 25mW 850nm infrared illuminator
• 1/8 MOA windage and elevation adjustments
• 72 MOA windage and elevation adjustment range
• Picatinny / Weaver accessory side rail
• In-view low-battery indicator
• Adjustable reticle brightness

• IPX4 water-resistant housing
• Rated to operate in 98% humidity
• -22 to 122° operating temperature
• Shock-resistant construction
• Vertically positioned battery housing
• 33.5 oz weight

Related Questions and Answers

Q: 1. How long is this cable...?

A: I am traveling now and don't have a measuring tape, but had the cord with me. I estimate that it is 4 1/2 feet. Hope this helps.

Q: 2. what are the dimensions of the plate?

A: The plate part on the Avenger C1100 Sparrow Plate is approximately 1.5 inch by 4.5 inches.

Q: 3. What is the max weight that this can hold?

A: The max weight that the Avenger C1100 Sparrow Plate can hold really depends on where it is mounted. An example of a light it can hold is an Arri 300W Plus Tungsten Fresnel which weighs about 4 lbs.

Q: 4. Hello I need I ring flash for a photo booth but I would need it to have its own power adapter not batteries any one that yo could recommend?

A: The Dot Line Ring flash you picked is for macro shots not portraits.If you want one that can produce a wider and brighter light so it is fine for photographing more than one person and larger than head and shoulder shots you will need a much larger ring flash.And it also depends on the camera model. It is best you call or come in to chat for this question so we can discuss what is best for you.

Q: 5. will this ring flash work with my Nikon D3400?

A: Probably, as it comes with several adapters. Mine is Nikon d90 and works great.

Q: 6. Is this compatible with a 5D Mark IV?

A: Yes. I bought it for my 5d Mk IV and it works perfectly.

Q: 7. Do they make a lid organizer that works with this case?

A: Unfortunately, there is no compatible lid organizer for this particular case.

Q: 8. What are the exterior dimensions?

A: Exterior Length:21.26 in Exterior Width:16.75 in Exterior Depth 9.83 in Exterior Cu. Volume: 2.03 cu ft

Q: 9. does this cable work with a 6d mark ii?

A: That is not listed by Canon as working with the Canon 6D Mark II. Here are the two cables we have that will work according to Canon. Canon IFC-200U USB Interface Cable - 6.9' (1.9 m) B&H # CAIFC200UCanon IFC-500U USB Interface Cable - 15.4' (4.7 m) B&H # CAIFC500U

Q: 10. Will this case work and fit as an airline carry on. Thnx.

A: Each air lines have their own size specifications so it is a good idea to contact the specific airlines for that.This is around the size the bag can be at the largest, The maximum dimensions cannot exceed any of the following measurements: 22 long x 14 wide x 9 tall or 115cm (56 x 36 x 23 cm). The case you are referring to is, 19.00 x 14.38 x 8.00 (48.26 x 36.53 x 20.32 cm). So it is just a bit too wide.