The 8050B Active Two-Way 8" Studio Monitor from Genelec provides an accurate reproduction of the source material in a compact form-factor with high output. Its die-cast aluminum enclosure features a rounded shape, which minimizes distortions caused by edge diffraction. The metal dome tweeter is surrounded by a smoothly-shaped Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.

The 8050B is built with Intelligent Signal Sensing (ISS) technology which automatically activates the speaker when an audio signal is detected, and puts it in Standby Mode when no signal is present, reducing the energy consumption to less than 0.5 watts. The 8050B features a 120 watt high frequency amplifier for its 1" tweeter, and a 150 watt low frequency amplifier for its 8" woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.

8" Woofer, 1" Tweeter    150W Bass Amplifier    120W Treble Amplifier    Auto Switching to Standby Saves Power    Curved Edges Reduce Distortions    Wide On and Off Axis Response    Die-Cast Aluminum Enclosure    Iso-Pod Table Stand Reduces Vibration

An included Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward

The Iso-Pod can be attached to the base or side of the monitor, for vertical or horizontal positioning

Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications and multimedia entertainment systems

Rear-facing Tone Controls enable you to optimize the speaker to its environment

Threaded holes for Omnimount Series 60 brackets and K&M loudspeaker mounts

More compatible mounting accessories, such as ceiling mounts and wall brackets, are available separately

Active crossover filters

Driver unit protection circuitry

Fully magnetically shielded

Related Questions and Answers

Q: 1. Wanting to add a shotgun boom to this stand. What accessories do I need to purchase? Thanks!

A: Yes. Please review the following item in order to do so. Auray Boom Pole Holder BH #AUBPH • MFR #BPH https://bhpho.to/3lYLmKe

Q: 2. would this hold a greenscreen?

A: This is a very solid stand that can bear a good bit of weight, especially if you use sandbags to counter any uneven loads. I don't know exactly what kind of green screen you have in mind, but two of these stands and some sort of crossbar would certainly hold a roll of green seamless paper.

Q: 3. I'm thinking of using this for a D&O light box, the 180W, and I need to tilt the box downward slightly more than its yoke allows. Does the top section of the stand tilt, or will I need a tilting connection or section?

A: The top riser of the stand does not tilt. To add this range of motion, you may place the Kupo EZ Grip Finger with Baby 5/8" Stud and Receiver, BH # KUKG300612 on the top of the C-stand: https://bhpho.to/3pp0csc

Q: 4. What adapter I need to put a Godox SD100d Bi light on this ? thanks

A: The Godox SL100D Daylight LED Video Light has a standard 5/8 receiver on the bracket and the Impact Turtle Base C-Stand - 10.75' (Chrome) top is a 5/8 male stud. It will fit with out any adapter.

Q: 5. Can this be used with a ptz?

A: While mounting a PTZ camera to the Impact Turtle Base C-Stand (10.75', Chrome) may be possible with the correct mount adapter for your PTZ camera, I would highly recommend using a more stable mount like a tripod instead.

Q: 6. What is the diameter of the lowest riser pole?

A: Its about 1 1/8th inches.

Q: 7. How is the quality compared to the Matthews Century C+ Stand with Removable Turtle Base, Black - 10.5 (3.2m)?

A: I don't know the Matthews stand but this one is rock-solid and I'm very happy with it. Sturdiness = heavy.

Q: 8. Can I attach a 50 inch Sony flat screen TV to the mount supplied? How tall is the stand when extended?

A: The Impact Studio LCD Monitor Support Kit comes with a VESA mount. If the TV has that mount, it will attach to that. Note: The stand supports no more than 22 lb, and if your TV is say 20 lb or more, it is not recommended. The stand can go up to 10.75 feet.

Q: 9. is it compatible with godox monolight heads?

A: Yes, it will fit.

Q: 10. I am looking to order a few of these stands and I can't seem to figure out what extra accessories I would need to purchase to attach an umbrella and a hot shoe for an accessory flash (sb-910). Would the hot shoe attachment simply screw into the c-stand tip or is another part needed? Thanks in advance for the help!!

A: You need an umbrella swivel. See foolowing copy/paste I addedAn Umbrella SwivelBudget about $15. This is a small bracket that attaches to the top of the light stand and holds your flash (and an umbrella, usually) and will tilt to any angle. They are small, cheap and rugged. With one of these you can also mount a flash to any type of a standard, 5/8 post (like a photo clamp) if you are not using a stand.For this and the light stand above, I also recommend LumoPro models as they are inexpensive, well-made and guaranteed for five years. LP has built a great reputation as an off-camera lighting supplier, and for good reason..