Designed to provide creative bass players with a wide palette of rich bass tones, the Zoom MS-60B MultiStomp Bass Pedal is a multi-effect processor with 58 different effects which are housed in a lightweight, standard-size, single pedal, thereby allowing you to efficiently cut down the size of your pedalboard. Effects include amp/preamp/DI modeling, compression, equalization, modulation, delay, reverb, and more. With its intuitive navigation and clear LCD display, the unit allows you to easily program, save, and rearrange your effects in both studio and low-light stage environments.

The MS-60B lets you use up to four effects simultaneously that can be arranged in any order you choose, and individually switched on/off. To get you going right away, it comes with 30 pre-loaded multi-effects which you can edit and store in 50 user-patch memories. For live gigs, you can create a list of up to 26 patches, to cycle through as you step on the pedal's footswitch.

Other features include an onboard chromatic tuner which supports both standard and drop-bass tunings, and a Tap Tempo function for synchronizing delay times or modulation rates to your song's tempo. The Zoom MS-60B is fitted with a 1/4" input jack for active and passive instruments, and two 1/4" output jacks for stereo recording or going to two amplifiers. The pedal is powered via two AA batteries, USB bus, or the Zoom AD-16 AC adapter (available separately).

58 Bass Effects    4 Effects Can Be Used Simultaneously    Built-In Chromatic Tuner    Tap-Tempo Delays    Onboard Emulations of Vintage Amps    32-Bit Floating Point DSP for Reverb    30 Preset Patches    Patch Cycling of up to 26 Presets    50 User-Preset Memory Locations    Backlit LCD Screen

• 58 bass effects and amp/preamp/DI models, including modulation, equalization, delay, reverb
• Up to four effects can be used simultaneously, in any order – even bring individual effects in and out of the chain as desired
• DSP microchip performs 32-bit floating-point calculations to create sophisticated studio-quality effects
• 50 memory locations for the storage of user-created patches
• 30 factory-preset patches
• Patch cycling of up to 26 presets
• Onboard chromatic tuner supports both standard and drop-bass tuning—bypass all effects during tuning or mute the outputs so that you can tune in silence
• Tap tempo for synchronization of delay times or modulation rates
• Auto Save function for automatic saving of all patch parameters
• 1/4" input jack (both active and passive instruments supported)
• Dual 1/4" output jacks for stereo recording
• Backlit LCD with contrast control for easy viewing in low-light environments
• USB port for power and firmware updates
• Lightweight and small enough to fit in your gig bag
• Easily integrates into any existing pedalboard
• Runs on two AA batteries, with alkaline battery life of up to 7 hours
• USB bus-powered or powered via Zoom AD-16 AC adapter (available separately)
• Power Management function automatically turns the pedal off if unused for extended periods

Related Questions and Answers

Q: 1. Do the spreaders come off?

A: Yes, the mid-level spreader of the Sachtler aktiv8 flowtech75 MS Tripod System can be easily removed.

Q: 2. Where does the AC power adaptor go when using the light?

A: You can hang the supply from a knob on the stand using the lanyard or you can mount it to a stand with ANDYCINE Universal V-Mount Battery Clamp BH #ANAVMC • MFR #A-VMC or similar.

Q: 3. Is it possible to buy one of the spreaders separately so that you have the option of a ground spreader or mid spreader, depending on the terrain of the shoot?

A: This kit for the Sachtler aktiv6 flowtech75 GS includes the ground-level spreaded. The mid-level spreader is available separately here: https://bhpho.to/3tA0hgw . Alternatively, you can start with the Sachtler aktive6 flowtech75 MS kit and buy the ground-level spreader. https://bhpho.to/3C1PZc7 https://bhpho.to/3C4LXQ3

Q: 4. Would Aktiv 6 be appropriate for Sony A7s3 and Sony 100-400 lens and maybe a small monitor on top? I'm debating between Aktiv 6 and Aktiv 8, but would hope to spend less on Aktiv 6.

A: Absolutely, the Sachtler aktiv6 has a load capacity of 0 to 17.6 lb / 0 to 8 kg.

Q: 5. Would a SWIT S-8082S 95Wh 14.4V V-Mount Battery work with this, since the grip specifies 14.8v?

A: Yes it will.

Q: 6. What would be the total weight be without the spreader? Thank you.

A: The aktiv6 head is 5.7 lb and the flowtech 75 legs without the spreader are about 6lbs without the spreader.

Q: 7. Does the pan bar slip when tilting up and down on the activ 6 head? I had a bad experience with an FSB 8T head doing just that, because Sachtler made the teeth too shallow for the pan bar to grip the rosette properly.

A: Fully functional Sachtler heads do not slip. What you described sounds like a defective or damaged tripod head. In a situation like that we recommend exchanging the tripod for a working model if within the return policy or contacting Sachtler to get the tripod head serviced. It is unfortunate that your previous experience with Sachtler was negative as they are known for making excellent tripod heads. It is unlikely that you will have the same experience with the Aktiv 6 head but in case you do contact us immediately and we will do what we can to make sure that you get a functional tripod head.

Q: 8. How long is the power cable?

A: Unit comes with a tethered cable that is 5ft to AC power supply and a 2-Slot non-polarized power cord (NEMA 1-15P to IEC320C7, 6ft cable.

Q: 9. Is a case included?

A: No, the Nanlite FS-60B Bi-Color Studio Spotlight does not include a case.

Q: 10. Is it bowens mount compatible?

A: No, the Nanlite FS-60B Bi-Color Studio Spotlight is a proprietary Bowens S mount which is smaller. This mount fits accessories such as the Nanlite Forza Mini Reflector and other items.