The 4011ES Cardiod Microphone with Active Side Cable from DPA is designed for capturing audio. It can be used with vocals, close miking instruments, amplifier cabinets, and similar sources in live sound reinforcement and recording applications. The microphone features a cardioid condenser element for minimizing off-axis noise in spot-miking applications, allowing for use in close-miking scenarios and to minimize bleed from other instruments. The 4011ES is powered by 48V of phantom power and offers a frequency range of 20 Hz to 20 kHz. It is capable of handling high SPLs without distortion and uses an MMP preamp with a 12mm XLR cable. A foam windscreen and SM4000-C suspension mount are included.

Compact Design    Cardioid Condenser    20 Hz to 20 kHz Frequency Range    48V Phantom Power    Total Transparency    Detailed High-Frequency Character    For Live Sound & Recording    Transparent Output Stage

Cardioid pickup pattern provides maximum separation between sound sources

Equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments, and vocals

Flat on-axis frequency response and phase response

Combine with additional separately sold DPA capsules or preamps for new configuration

Related Questions and Answers

Q: 1. Is there a Sony version of this microphone? I don't see any listing for Sony. I understand that the Sony wireless mic's have a different pin configuration for power.

A: What you could do is get the DPA Microphones 6060 CORE Subminiature Normal Sensitivity Omni Lavalier Microphone - Black (B&H # DP6060OCUB00) with a Microdot connector, not packaged with any adapter, then purchase the compatible Sony adapter separately. For the Sony adapter, you can use the DPA Microphones DAD6019 Microdot to 1/8" Mini Connector for Sony Transmitters (B&H # DPDAD6019) or the Deity Microphones DA35S Microdot to Locking 3.5mm Adapter for Sony Transmitters (B&H # DEKSMDTDA35S). The DPA adapter is made in Denmark and the Deity adapter is made in China. Both adapters will work to enable compatibility with a Sony transmitter. When purchased separately, the 6060 CORE with the Microdot connector and DPA's Microdot adapter for Sony come out to the same price as the 6060 CORE that comes packaged with the Sennheiser adapter.

Q: 2. (Sorry-- unable to edit previously submitted question about difference between two similar stereo pairs of 4061 being offered by B&H) Specifically, I'm wondering if there is any downside to the newer (I presume) model. That is, is it equal to, or better than, the older 4061, in every technical detail? Thank you. DG

A: The DPA Microphones d:screet Core 4061 is much improved over the original "legacy" 4061: as described on the B&H Webpage: DPA Microphones d:screet Core 4061 The Core 4061 miniature microphone amplifier delivers a 4 dB increase in dynamic range and a 14 dB reduction in THD (total harmonic distortion)

Q: 3. Are these good to capture wildlife and nature sounds when paired with a Sony PCM-D10?

A: Yes the Microphone Madness MCSM-4 would be ideal for that kind of application.

Q: 4. Is the 3.5mm locking connector compatible with the Sennheiser body packs?

A: Yes, the DPA Microphones Core 4066 Omnidirectional Headset Microphone with 1/8" Mini Jack Connector is compatible with all Sennheiser wireless transmitters that use a 3.5mm locking input connector.

Q: 5. Is this just the 6060 w a microdot and the sennheiser adapter or is the sennheiser jack hardwired

A: Yes, the DPA Microphones 6060 CORE Subminiature Normal Sensitivity Omni Lavalier Microphone with Locking 3.5mm Sennheiser Adapter has a hardwired Microdot connector and includes the DPA Microphones DAD6034 Microdot to Locking 3.5mm Sennheiser Adapter (B&H # DPDAD6034).

Q: 6. I hope you have a promotion of DPA4017C with cinela pianissimo, will you have it?

A: DPA Microphones 4017C Compact Shotgun Microphone with MMP-C Preamp B&H # DP4017C

Q: 7. Is the spec. given here for the diaphragm an error? i.e., 0.05' / 16 mm. Surely 16mm = 0.5'

A: Here us the specification as published by DPA microphones: Capsule Diameter - 16mm (0.6 in).

Q: 8. will this work with the Rode Wireless Go II?

A: Yes. With this adapter: https://www.bhphotovideo.com/c/product/390976-REG/DPA_Microphones_DAD6034_DAD6034_MicroDot_to_Locking.html

Q: 9. Would this windscreen be compatible with the 4018b?

A: This should fit the capsule portion of the DPA 4018.

Q: 10. Is this adapter wired for Lectrosonics Servo wiring, or Universal wiring?

A: This specification is not published by DPA, but available upon request. The DPA DAD3056 uses universal wiring and is listed to work with all LM, SM and UM series transmitters. Should you have an M185 wireless system, this adapter will not work. You will need the DAD6012.