Keep your setup protected with the 3-Year Next Business Day Onsite Support with ADP from HP. Providing 3 years of post-warranty coverage, this manufacturer support plan provides next business day onsite hardware support following remote diagnosis. Replacement parts and materials are included in the support plan, as are formal escalation procedures and management and access to electronic support information and tools. Plus, get peace of mind with accidental damage protection for spills, drops, falls, and more.

Please note, to take advantage of this warranty, your hardware must currently be under its native warranty. Service starts on the date of your hardware purchase, and service levels and response times may vary depending on your geographic location. Please be aware that external monitors are not covered.

For Select HP Workstations    Manufacturer Support Plan    Next Business Day Onsite Support    Accidental Damage Protection    Includes Replacement Parts & Materials    HP Remote System Access and Support

In-person repairs, parts and service will arrive at your door the next business day. HP experts are on the job nine hours a day, five days a week. Please note, service levels and response times may vary depending on your geographic location. Service starts on date of hardware purchase.

Know that your hardware will be good as new as soon as possible thanks to HP's knowledgeable expertise and efficient service and support.

HP support specialists are always ready to assist in whatever way the situation calls for, whether it's remotely over the phone or in person.

Accidents happen. In the event that peril finds your PC, don't worry. Accidental damage protection covers spills, drops, falls and more.

This support plan is compatible with select HP Z6 G4 and Z8 G4 workstations.

Related Questions and Answers

Q: 1. When camera/coupler/Tether Tool is operating, suggestions of how to keep battery drain from exceeding the simultaneous charging? I have found it will not do both at the same time. Thanks.

A: It works for me. Keep in mind you have to use a power bank or charger that outputs at least 2 amps (the one i use is 2.1 amps). I tried with a power bank that only outputs 1 amp initially and that gave me the same problem as you have.

Q: 2. Does this come with the AC adapter?

A: No, the Case Relay Power System does not come with an AC adapter.

Q: 3. What is the Outer diameter of the each pole?

A: According to the manufacturer, the base pole is 45mm while the riser pole is 40mm.

Q: 4. What is the weight of Extreme?

A: The Platypod eXtreme Camera Support comes in at a weight of 6.9 oz / 0.2 kg.

Q: 5. What is the physical difference between the LS-1 and LS-2? The front adjustable part looks the same. Does the difference come down to the length of the horizontal part that clamps to the lens plate?

A: Each of the items has a list of compatible lenses. The size varies based on where they touch/attach to the lens.

Q: 6. How to power shogun recorder that uses Sony L series batts?

A: Hi there. I bought the kit for my Sony a6300 which uses NP FW50 battery, a much smaller battery in size as compared to the L-series battery. I am not sure if TetherTools make the same thing for L-series battery. Best way is to check with TetherTools direct. Good Luck.

Q: 7. The description says its only compatible with 3 sony cameras. Would this work with any sony camera that uses an fz100 battery?

A: Under the Compatibility section we list the current cameras this will work with. It is more than three at this time.

Q: 8. Will this coupler work for a Canon 5D Mark IV?

A: Yes, this kit is compatible with the 5d4.

Q: 9. is there a coupler / dummy battery connection for Sony NPFZ100 batteries? specifically, i want to use with my sony a9 and a7iii. thanks!

A: Yes there is. BH #TECRNPFZ100 is the Tether Tools Relay Camera Coupler for Sony Cameras with NP-FZ100 Battery. You would just need the Tether Tools Case Relay Camera Power System to go along with it, BH #TECRUPS110. Coupler - https://bhpho.to/2w08C3u Relay Camera Power System - https://bhpho.to/3c7sths

Q: 10. No matter what I do I cant get the poles right enough against the ceiling; they seem secure but once I put a backdrop up it loosens and falls out of place. Ive tried tightening the nut and changing the tension per the instruction manual but has had little effect. I must be doing something wrong, I just dont know what..?

A: Difficult to answer without seeing what you are doing. I have no problem with mine. I raise the pole as tight as I can by hand and then pull the lever down for the final tightening... Does your ceiling height fall within the perameters of the pole height?