This 500 ft SMPTE Hybrid FMW/PUW LEMO Belden Indoor Fiber Cable from Camplex is a cable-mount, camera-to-CCU connection cable combining optical, electrical, and control signal paths. It features a round flange FMW LEMO connector and round socket PUW LEMO connector. It uses a Belden CMR Riser Rated indoor cable suitable for permanent installations in building risers. All assemblies are tested for < -55dB return loss, exceeding SMPTE 304M/311M standards. Diagnostics documentation is provided with each cable.

This cable is standardized by SMPTE for HDTV broadcast camera use. It supports 19.4 Mbps to 3 Gbps bandwidths.

SMPTE Standard HDTV Broadcast Cable    Camera-to-CCU Connection Cable    Optical, Electrical, and Control Paths    FMW Round Flange / PUW Round Socket    Belden Riser Rated Indoor Cable    Tested for < -55dB Return Loss    19.4 Mbps to 3 Gbps Bandwidth    Diagnostics Documentation Provided

• Cable-mount, camera-to-CCU connection cable
• Combines optical, electrical, and control signal paths
• Round flange FMW LEMO connector and round socket PUW LEMO connector
• Belden CMR Riser Rated indoor cable assembly
• Suitable for permanent installations in building risers
• Tested for < -55dB return loss (diagnostics documentation provided)

• Terminated by LEMO trained technicians
• LEMO certified, multi-stage machine polished fiber contacts
• Electrical assemblies 100% tested for continuity and shorts
• Fiber optic assemblies 100% tested for attenuation and back reflection
• Stainless steel assemblies
• Rubber dust caps
• 19.4 Mbps to 3 Gbps bandwidth

Related Questions and Answers

Q: 1. Does this grip have a 1/4-20 thread on the long side to support it being used on a cinema rig?

A: FUJIFILM FT-XH File Transmitter Grip has on the bottom a standard tripod 1/4 female thread.

Q: 2. will this work with a Godox smart 250 sDi flash?

A: The Godox FT-E250 Flash Tube for E250 Flash Head BH #GOFTE250 is specifically for the E250 flash.

Q: 3. Just to double check, the battery eliminator will not work if there is a battery in the camera? Ideally I'd like to use this as a battery extender for a pretty specific application, but is that impossible?

A: Yes, remove the internal battery then use this Battery Eliminator.

Q: 4. Does this bag have a side pocket and strap that can hold a Peak Design travel tripod? If not, which model has that?

A: The side pocket shown in the first photo for this bag will hold about half the tripod and there is no strap for the rest. The Manfrotto Advanced Travel III is a good option: https://bhpho.to/3o9Dqr8 It has a dedicated side pocket that will fully fit the tripod. The Manfrotto Pro Light Backloader is also a good option: https://bhpho.to/3d8Ref3 It's a bigger option but still a good choice.

Q: 5. Can the camera clip be removed from the mini tripod and put on to another tripod?

A: Based on the picture, you should be able to unscrew the clip from this tripod and attach it to any other tripod with a 1/4 20'' thread.

Q: 6. Does the Fujifilm FT-XH come with two batteries or do they need to be purchased separately?

A: Although the Fujifilm FT-XH File Transmitter Grip can hold 2 NP-W235 Batteries, they are not included. The FUJIFILM NP-W235 Lithium-Ion Battery (7.2V, 2200mAh), BH # FUNPW235 can be found here: https://bhpho.to/2HYZe2M

Q: 7. Is this made by a 3rd party?

A: The FUJIFILM FT-XH File Transmitter Grip is made by Fujifilm.

Q: 8. Does it really improve wireless tethering speed? How much faster with X-H2s?

A: Yes, not only does the FUJIFILM FT-XH File Transmitter Grip increase transfer speeds to 600 Mb/s, it also allows for wired LAN connectivity increasing the speeds further.

Q: 9. What's the protocol it's using to do streaming 4k? NDI?

A: The FUJIFILM FT-XH File Transmitter Grip can be used for file transfer and tethered shooting. It is not capable of livestreaming. Livestreaming would be from the camera body itself.

Q: 10. Is there a transport case for this? I see one in the promotional pictures.

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have its own specific transport case, but any case that will accommodate the dimensions of 18.98 x 10.47 x 2.75" / 48.21 x 26.59 x 6.96 cm will suffice in this situation. The case in the image is hypothetical.