This 656 ft SMPTE Hybrid FMW/PUW LEMO Belden Indoor Fiber Cable from Camplex is a cable-mount, camera-to-CCU connection cable combining optical, electrical, and control signal paths. It features a round flange FMW LEMO connector and round socket PUW LEMO connector. It uses a Belden CMR Riser Rated indoor cable suitable for permanent installations in building risers. All assemblies are tested for < -55dB return loss, exceeding SMPTE 304M/311M standards. Diagnostics documentation is provided with each cable.

This cable is standardized by SMPTE for HDTV broadcast camera use. It supports 19.4 Mbps to 3 Gbps bandwidths.

SMPTE Standard HDTV Broadcast Cable    Camera-to-CCU Connection Cable    Optical, Electrical, and Control Paths    FMW Round Flange / PUW Round Socket    Belden Riser Rated Indoor Cable    Tested for < -55dB Return Loss    19.4 Mbps to 3 Gbps Bandwidth    Diagnostics Documentation Provided

• Cable-mount, camera-to-CCU connection cable
• Combines optical, electrical, and control signal paths
• Round flange FMW LEMO connector and round socket PUW LEMO connector
• Belden CMR Riser Rated indoor cable assembly
• Suitable for permanent installations in building risers
• Tested for < -55dB return loss (diagnostics documentation provided)

• Terminated by LEMO trained technicians
• LEMO certified, multi-stage machine polished fiber contacts
• Electrical assemblies 100% tested for continuity and shorts
• Fiber optic assemblies 100% tested for attenuation and back reflection
• Stainless steel assemblies
• Rubber dust caps
• 19.4 Mbps to 3 Gbps bandwidth

Related Questions and Answers

Q: 1. Is there a transport case for this? I see one in the promotional pictures.

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have its own specific transport case, but any case that will accommodate the dimensions of 18.98 x 10.47 x 2.75" / 48.21 x 26.59 x 6.96 cm will suffice in this situation. The case in the image is hypothetical.

Q: 2. This lacks a timecode or genlock input, but can it perform an equivalent sync function through its Ethernet control?

A: The FUJIFILM FT-XH is a file transmitting solution and would not add Genlock or Sync to the Fuji X-H2S. *FTP transfer by wired LAN / wireless LAN / USB Smartphone tethering *Tethered shooting by wired LAN / wireless LAN *Remote recording by wired LAN / wireless LAN; Capable of controlling up to 4 X-H2S cameras from a browser at the same time

Q: 3. On the Tripod- What is the minimum spread width of the back two tripod feet?

A: You can spread the feet as little as you'd like but the less you spread them the less stable the Sachtler Cine 7+7 FT MS flowtech 100 Tripod System will be.

Q: 4. Does it really improve wireless tethering speed? How much faster with X-H2s?

A: Yes, not only does the FUJIFILM FT-XH File Transmitter Grip increase transfer speeds to 600 Mb/s, it also allows for wired LAN connectivity increasing the speeds further.

Q: 5. Can this be used on older DP3M?

A: Thank you for your interest in Sigma products. The Conversion Lens FT-1201 is only compatible with the DP3 Quattro. It is not compatible with the DP3 Merrill.

Q: 6. What are the outside dimensions of this backpack?

A: The external dimensions of the Manfrotto Advanced² Hybrid Photo Backpack are 11.02 x 7.48 x 16.93 in.

Q: 7. Is the ball head metal or plastic?

A: According to Magnus, the Ball Head is made of Plastic.

Q: 8. What's the protocol it's using to do streaming 4k? NDI?

A: The FUJIFILM FT-XH File Transmitter Grip can be used for file transfer and tethered shooting. It is not capable of livestreaming. Livestreaming would be from the camera body itself.

Q: 9. If I only need 100' lines in the water, what happens to the extra lines?

A: The Gladius Mini S can be purchased with a 328' tether that's half as long as this one: https://www.bhphotovideo.com/c/product/1643299-REG/chasing_gms100_gladius_mini_s.html

Q: 10. How works doing tethering with Capture One or Lightroom sending RAW files?

A: Tethered support with the FUJIFILM FT-XH File Transmitter Grip is going to be limited. Adobe Lightroom does not support tethered shooting with any Fujifilm cameras, only immediate import once shot. Capture One Pro 22 does not currently support wireless tethering with any Fujifilm cameras, it would be only wired support.