This 250 ft SMPTE Hybrid FUW/PUW LEMO Gepco Outdoor Fiber Cable from Camplex is a cable-mount, camera-to-CCU connection cable combining optical, electrical, and control signal paths. It features an FUW LEMO connector and round socket PUW LEMO connector. It uses an extra-flexible, Gepco, 9.2mm, harsh environment outside broadcast cable designed to US SMPTE standards. All assemblies are tested for < -55dB return loss, exceeding SMPTE 304M/311M standards. Diagnostics documentation is provided with each cable.

This cable is standardized by SMPTE for HDTV broadcast camera use. It supports 19.4 Mbps to 3 Gbps bandwidths.

SMPTE Standard HDTV Broadcast Cable    Camera-to-CCU Connection Cable    Optical, Electrical, and Control Paths    FUW LEMO / Round Socket PUW LEMO    Gepco Harsh Environment Outside Cable    Tested for < -55dB Return Loss    19.4 Mbps to 3 Gbps Bandwidth    Diagnostics Documentation Provided

• Cable-mount, camera-to-CCU connection cable
• Combines optical, electrical, and control signal paths
• FUW LEMO connector and round socket PUW LEMO connector
• Gepco harsh environment outdoor cable assembly
• Tested for < -55dB return loss (diagnostics documentation provided)

• Terminated by LEMO trained technicians
• LEMO certified, multi-stage machine polished fiber contacts
• Electrical assemblies 100% tested for continuity and shorts
• Fiber optic assemblies 100% tested for attenuation and back reflection
• Stainless steel assemblies
• Rubber dust caps
• 19.4 Mbps to 3 Gbps bandwidth

Related Questions and Answers

Q: 1. Is there a transport case for this? I see one in the promotional pictures.

A: The Blackmagic Design SmartView 4K G3 15.6" DCI 4K Broadcast Monitor with SMPTE 2110 does not have its own specific transport case, but any case that will accommodate the dimensions of 18.98 x 10.47 x 2.75" / 48.21 x 26.59 x 6.96 cm will suffice in this situation. The case in the image is hypothetical.

Q: 2. Will it work on both X-H2S & X-H2?

A: Yes, the FUJIFILM FT-XH File Transmitter Grip will work with both the FUJIFILM X-H2 and X-H2S Mirrorless Cameras.

Q: 3. Does it really improve wireless tethering speed? How much faster with X-H2s?

A: Yes, not only does the FUJIFILM FT-XH File Transmitter Grip increase transfer speeds to 600 Mb/s, it also allows for wired LAN connectivity increasing the speeds further.

Q: 4. Does it fit with the Nikon D800 and D810 plus battery grip?

A: Yes, there are long rails that will allow you to use the OptiView 250 with cameras installed with battery grips.

Q: 5. How much height adjustment does this have?

A: Using the long bracket you will get 60mm of height adjustment. That is enough to cover the Nikon D850 with a grip or Canon 5D Mark 4 also with the grip.

Q: 6. Will this fit Panasonic Lumix DMC-G7?

A: Yes, it will fit on the Panasonic Lumix DMC-G7 but will cover some controls on the back right of the screen. The hood is for 3.2 inch LCD screens and the camera has a 3 inch LCD screen.There are a few others that might be better.

Q: 7. will this work with a Godox smart 250 sDi flash?

A: The Godox FT-E250 Flash Tube for E250 Flash Head BH #GOFTE250 is specifically for the E250 flash.

Q: 8. What's the protocol it's using to do streaming 4k? NDI?

A: The FUJIFILM FT-XH File Transmitter Grip can be used for file transfer and tethered shooting. It is not capable of livestreaming. Livestreaming would be from the camera body itself.

Q: 9. Can this be used on older DP3M?

A: Thank you for your interest in Sigma products. The Conversion Lens FT-1201 is only compatible with the DP3 Quattro. It is not compatible with the DP3 Merrill.

Q: 10. where can i buy the tiny red screws of the baseplate?

A: if the store does not have them try home depot or Lowes to see if they have some that will fit it ..or try a hobby store..those who fly remote controlled models use this type of screw to hold the body on to the fuselage or wings to the body....or email the B&H store direct..i find the store helpful