This 50 ft SMPTE Hybrid FMW/PBW LEMO Belden Indoor Fiber Cable from Camplex is a chassis-mount interconnect cable combining optical, electrical, and control signal paths. It features a round flange FMW LEMO connector and square flange PBW LEMO connector. It uses a Belden CMR Riser Rated indoor cable suitable for permanent installations in building risers. All assemblies are tested for < -55dB return loss, exceeding SMPTE 304M/311M standards. Diagnostics documentation is provided with each cable.

This cable is standardized by SMPTE for HDTV broadcast camera use. It supports 19.4 Mbps to 3 Gbps bandwidths.

SMPTE Chassis-Mount Interconnect Cable    Optical, Electrical, and Control Paths    FMW Round Flange / PBW Square Flange    Belden Riser Rated Indoor Cable Assembly    Tested for < -55dB Return Loss    19.4 Mbps to 3 Gbps Bandwidth    Diagnostics Documentation Provided

• Chassis-mount interconnect cable
• Combines optical, electrical, and control signal paths
• Round flange FMW LEMO connector and square flange PBW LEMO connector
• Belden CMR Riser Rated indoor cable assembly
• Suitable for permanent installations in building risers
• Tested for < -55dB return loss (diagnostics documentation provided)

• Terminated by LEMO trained technicians
• LEMO certified, multi-stage machine polished fiber contacts
• Electrical assemblies 100% tested for continuity and shorts
• Fiber optic assemblies 100% tested for attenuation and back reflection
• Stainless steel assemblies
• Rubber dust caps
• 19.4 Mbps to 3 Gbps bandwidth

Related Questions and Answers

Q: 1. Does it really improve wireless tethering speed? How much faster with X-H2s?

A: Yes, not only does the FUJIFILM FT-XH File Transmitter Grip increase transfer speeds to 600 Mb/s, it also allows for wired LAN connectivity increasing the speeds further.

Q: 2. will this work with a Godox smart 250 sDi flash?

A: The Godox FT-E250 Flash Tube for E250 Flash Head BH #GOFTE250 is specifically for the E250 flash.

Q: 3. Would these feet work on any tripod with a 3/8” socket?

A: While they were designed with specific tripods in mind, they should work in most tripods with a 3/8 16th thread in the leg.

Q: 4. How does this unit transport? Are tools required to partially assemble/breakdown? Product highlights says carry case included, but none is shown.

A: We do not see this breaking down and would go with the idea that the carrying case will be adequate for it's purpose.

Q: 5. Will the flex shooter mini or pro fit better with this Apex?

A: Flex shooter mini or pro will both work well on FLM CP30-M5 Hybrid Series II Tripod. If you have a heavy and long lens like the Nikon AF-S 800mm 5.6 lens I would recommend the Pro and if you have a lighter and smaller Sony 200-600 6.3 lens I would recommend the Mini.

Q: 6. On the Tripod- What is the minimum spread width of the back two tripod feet?

A: You can spread the feet as little as you'd like but the less you spread them the less stable the Sachtler Cine 7+7 FT MS flowtech 100 Tripod System will be.

Q: 7. Does this grip have a 1/4-20 thread on the long side to support it being used on a cinema rig?

A: FUJIFILM FT-XH File Transmitter Grip has on the bottom a standard tripod 1/4 female thread.

Q: 8. Is this made by a 3rd party?

A: The FUJIFILM FT-XH File Transmitter Grip is made by Fujifilm.

Q: 9. can I use the RRS BH-55 or Robus RTH-1050 with the FLM CP30-M5 Hybrid tripod?

A: Yes RRS BH-55 or Robus RTH-1050 do fit the FLM CP30-M5 Hybrid tripod.

Q: 10. How works doing tethering with Capture One or Lightroom sending RAW files?

A: Tethered support with the FUJIFILM FT-XH File Transmitter Grip is going to be limited. Adobe Lightroom does not support tethered shooting with any Fujifilm cameras, only immediate import once shot. Capture One Pro 22 does not currently support wireless tethering with any Fujifilm cameras, it would be only wired support.