This 164 ft SMPTE Hybrid FMW/PBW LEMO Belden Indoor Fiber Cable from Camplex is a chassis-mount interconnect cable combining optical, electrical, and control signal paths. It features a round flange FMW LEMO connector and square flange PBW LEMO connector. It uses a Belden CMR Riser Rated indoor cable suitable for permanent installations in building risers. All assemblies are tested for < -55dB return loss, exceeding SMPTE 304M/311M standards. Diagnostics documentation is provided with each cable.

This cable is standardized by SMPTE for HDTV broadcast camera use. It supports 19.4 Mbps to 3 Gbps bandwidths.

SMPTE Chassis-Mount Interconnect Cable    Optical, Electrical, and Control Paths    FMW Round Flange / PBW Square Flange    Belden Riser Rated Indoor Cable Assembly    Tested for < -55dB Return Loss    19.4 Mbps to 3 Gbps Bandwidth    Diagnostics Documentation Provided

• Chassis-mount interconnect cable
• Combines optical, electrical, and control signal paths
• Round flange FMW LEMO connector and square flange PBW LEMO connector
• Belden CMR Riser Rated indoor cable assembly
• Suitable for permanent installations in building risers
• Tested for < -55dB return loss (diagnostics documentation provided)

• Terminated by LEMO trained technicians
• LEMO certified, multi-stage machine polished fiber contacts
• Electrical assemblies 100% tested for continuity and shorts
• Fiber optic assemblies 100% tested for attenuation and back reflection
• Stainless steel assemblies
• Rubber dust caps
• 19.4 Mbps to 3 Gbps bandwidth

Related Questions and Answers

Q: 1. Is it waterproof?

A: The FLM CP30-M5 is not fully waterproof, but can be used in shallower depths without issues. Regular maintenance and cleaning/rinsing to remove sediments are recommended if submersed or if used in saltwater.

Q: 2. On the Tripod- What is the minimum spread width of the back two tripod feet?

A: You can spread the feet as little as you'd like but the less you spread them the less stable the Sachtler Cine 7+7 FT MS flowtech 100 Tripod System will be.

Q: 3. Can this be used on older DP3M?

A: Thank you for your interest in Sigma products. The Conversion Lens FT-1201 is only compatible with the DP3 Quattro. It is not compatible with the DP3 Merrill.

Q: 4. Is this applicable to use on an M9?

A: This screen is too big for the M9, you will need a protector that is for a 2.5" screen. Click on the link below to view; https://bhpho.to/2V5Lnif

Q: 5. Does this grip have a 1/4-20 thread on the long side to support it being used on a cinema rig?

A: FUJIFILM FT-XH File Transmitter Grip has on the bottom a standard tripod 1/4 female thread.

Q: 6. What ballhead (Arca compatible) do you recommend for this? I'm usually mounting Fuji X-T3and 70-300.

A: There are a boatload of great choices that'll work for you, your X-T3 + 70-300 and the CP30-M5 tripod! Here are some good options: https://bhpho.to/3BnYBc6 https://bhpho.to/3BmNfVK https://bhpho.to/3wrf5Pm (comes with arca-swiss QR plate)

Q: 7. Is this made by a 3rd party?

A: The FUJIFILM FT-XH File Transmitter Grip is made by Fujifilm.

Q: 8. will this work with a Godox smart 250 sDi flash?

A: The Godox FT-E250 Flash Tube for E250 Flash Head BH #GOFTE250 is specifically for the E250 flash.

Q: 9. Will it work on both X-H2S & X-H2?

A: Yes, the FUJIFILM FT-XH File Transmitter Grip will work with both the FUJIFILM X-H2 and X-H2S Mirrorless Cameras.

Q: 10. How does this unit transport? Are tools required to partially assemble/breakdown? Product highlights says carry case included, but none is shown.

A: We do not see this breaking down and would go with the idea that the carrying case will be adequate for it's purpose.