This 250 ft SMPTE Hybrid FMW/PBW LEMO Belden Indoor Fiber Cable from Camplex is a chassis-mount interconnect cable combining optical, electrical, and control signal paths. It features a round flange FMW LEMO connector and square flange PBW LEMO connector. It uses a Belden CMR Riser Rated indoor cable suitable for permanent installations in building risers. All assemblies are tested for < -55dB return loss, exceeding SMPTE 304M/311M standards. Diagnostics documentation is provided with each cable.

This cable is standardized by SMPTE for HDTV broadcast camera use. It supports 19.4 Mbps to 3 Gbps bandwidths.

SMPTE Chassis-Mount Interconnect Cable    Optical, Electrical, and Control Paths    FMW Round Flange / PBW Square Flange    Belden Riser Rated Indoor Cable Assembly    Tested for < -55dB Return Loss    19.4 Mbps to 3 Gbps Bandwidth    Diagnostics Documentation Provided

• Chassis-mount interconnect cable
• Combines optical, electrical, and control signal paths
• Round flange FMW LEMO connector and square flange PBW LEMO connector
• Belden CMR Riser Rated indoor cable assembly
• Suitable for permanent installations in building risers
• Tested for < -55dB return loss (diagnostics documentation provided)

• Terminated by LEMO trained technicians
• LEMO certified, multi-stage machine polished fiber contacts
• Electrical assemblies 100% tested for continuity and shorts
• Fiber optic assemblies 100% tested for attenuation and back reflection
• Stainless steel assemblies
• Rubber dust caps
• 19.4 Mbps to 3 Gbps bandwidth

Related Questions and Answers

Q: 1. I have a similar backpack and the camera compartment is a separate insert easily crushed by content above, is this bag the same?

A: The top compartment and the bottom are divided by a thick foam pad. It does feel like the bottom will not be crushed by the item from the top.

Q: 2. what is the height of the camera compartment? Will a RF100-400 Canon lens @7.5" fit?

A: The camera compartment on the Lowepro Truckee BP 250 (Black, 18L) is modular, so it would depend on how you orient the dividers in the bag. The interior dimensions are 16.9 x 10.2 x 5.1". The Canon RF 100-400mm f/5.6-8 IS USM Lens should fit most configurations without problem.

Q: 3. Does the Fujifilm FT-XH come with two batteries or do they need to be purchased separately?

A: Although the Fujifilm FT-XH File Transmitter Grip can hold 2 NP-W235 Batteries, they are not included. The FUJIFILM NP-W235 Lithium-Ion Battery (7.2V, 2200mAh), BH # FUNPW235 can be found here: https://bhpho.to/2HYZe2M

Q: 4. Does this work for the Nikon D3300?

A: This will be compatible with the D3300.

Q: 5. Will it my Sony A57?

A: Yes it will fit Sony A57

Q: 6. where can i buy the tiny red screws of the baseplate?

A: if the store does not have them try home depot or Lowes to see if they have some that will fit it ..or try a hobby store..those who fly remote controlled models use this type of screw to hold the body on to the fuselage or wings to the body....or email the B&H store direct..i find the store helpful

Q: 7. Is there a rain cover available for this bag?

A: The Lowepro AW Camera Bag Rain Cover (Orange, Large) will work with the Lowepro Truckee BP 250 (Black, 18L) backpack: https://bhpho.to/4azOMdh.

Q: 8. will this fit a D7100 or a D500 Nikon?

A: Yes this product will work with the Nikon D500 and D7100.

Q: 9. What's the protocol it's using to do streaming 4k? NDI?

A: The FUJIFILM FT-XH File Transmitter Grip can be used for file transfer and tethered shooting. It is not capable of livestreaming. Livestreaming would be from the camera body itself.

Q: 10. will this work with a Godox smart 250 sDi flash?

A: The Godox FT-E250 Flash Tube for E250 Flash Head BH #GOFTE250 is specifically for the E250 flash.