This 164 ft SMPTE Hybrid opticalCON DUO to FUW LEMO Singlemode Outdoor Fiber Cable from Camplex is a SMPTE 311M compliant broadcast interconnect cable suitable for outdoor and indoor use. It features a Neutrik OpticalCON DUO NO2SX connector and FUW LEMO connector. The OpticalCON connector is COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. It has common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55dB typical return and comes with diagnostics documentation.

The opticalCON connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

311M Compliant Interconnect Cable    OpticalCON DUO NO2SX / FUW LEMO    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55dB Return Loss    IP65 Waterproof in Mated Condition    Diagnostics Documentation Provided

• SMPTE 311M compliant interconnect cable
• COCA factory terminated OpticalCON DUO NO2SX connector, tested to GR-326-CORE endface standards
• FUW LEMO connector
• Tested for < -55dB typical return loss
• IP65 waterproof in mated condition
• Assembled using the Neutrik opticalCON ADVANCED system
• Two channel fiber optic connection system

• Overall copper braided shield and stainless steel strength member
• Suitable for indoor camera links considering specific conditions according to IEC 60664-1
• Machine polished and tested end faces
• Tactical tight buffered PUR cable
• Supports standard optical LC-Duplex connectors
• All metal housing cable connector with heavy duty cable retention
• Automatic sealing shutter with silicone gasket for dust and dirt protection
• Push/Pull locking mechanism
• No tools required to clean

Related Questions and Answers

Q: 1. Is this made by a 3rd party?

A: The FUJIFILM FT-XH File Transmitter Grip is made by Fujifilm.

Q: 2. What's the protocol it's using to do streaming 4k? NDI?

A: The FUJIFILM FT-XH File Transmitter Grip can be used for file transfer and tethered shooting. It is not capable of livestreaming. Livestreaming would be from the camera body itself.

Q: 3. Does this grip have a 1/4-20 thread on the long side to support it being used on a cinema rig?

A: FUJIFILM FT-XH File Transmitter Grip has on the bottom a standard tripod 1/4 female thread.

Q: 4. Can I use two on camera Godox V1 as masters at the same time to trigger a couple of the AD 300s?

A: If they are on the same channels and same ID they can both fire the flash. You will need to make sure not to fire them at the same time or the light might not have the time to properly recycle.

Q: 5. What do you mean by "four bidirectional BNC SDI inputs/outputs"? can I plug a screen and use it as an output as well?

A: Each of the connections may be configured as either an input or an output but obviously not at the same time.

Q: 6. Can I use this system for a 3-4 camera livestream setup where I can see every connection as an independent video source that I can switch between in the software? And if so, is there a 4k version available yet?

A: Many have suggested here that the decklink 8k Pro would be a comparable card with 4k resolution. Let me warn you, IT IS NOT! As someone who purchased the 8k card and have since returned it, know that the marketing material/ info is actually deceiving. It seems like it would allow for 4 separate in/s out/s at a time, but it doesn't actually do that. It's more of like a quad channel card, or a single input and output card, as opposed to 4 separate inputs or outputs.

Q: 7. Cn you directly connect an old Can you connect directly a old hasselblad 500cm to the AD300 with a sync cord?

A: Yes, the following unit offers a 3.5mm sync jack that willallow a end-user to do so. But the following item is needed. Impact Sync Cord Male Mini (3.5mm) to Male PC (16') BH #IMMMPCM16 • MFR #9031440 https://bhpho.to/3OCY3rn

Q: 8. Can this card input signal analogue/ composite from a sony mc2500 camera?

A: this card only acept SDI can be in format SD or HD. Not analogue (composite)

Q: 9. Will this card help me to keyout the lyrics to an Atem switcher in order to add them to my livestream program and the projector?

A: Yes if you have software that will deliver key and fill signals to separate ports. It is best to check with your software provider to see if this card is supported.

Q: 10. Will it work on both X-H2S & X-H2?

A: Yes, the FUJIFILM FT-XH File Transmitter Grip will work with both the FUJIFILM X-H2 and X-H2S Mirrorless Cameras.