This 500 ft SMPTE Hybrid opticalCON DUO to FUW LEMO Singlemode Outdoor Fiber Cable from Camplex is a SMPTE 311M compliant broadcast interconnect cable suitable for outdoor and indoor use. It features a Neutrik OpticalCON DUO NO2SX connector and FUW LEMO connector. The OpticalCON connector is COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. It has common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55dB typical return and comes with diagnostics documentation.

The opticalCON connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

311M Compliant Interconnect Cable    OpticalCON DUO NO2SX / FUW LEMO    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55dB Return Loss    IP65 Waterproof in Mated Condition    Diagnostics Documentation Provided

• SMPTE 311M compliant interconnect cable
• COCA factory terminated OpticalCON DUO NO2SX connector, tested to GR-326-CORE endface standards
• FUW LEMO connector
• Tested for < -55dB typical return loss
• IP65 waterproof in mated condition
• Assembled using the Neutrik opticalCON ADVANCED system
• Two channel fiber optic connection system

• Overall copper braided shield and stainless steel strength member
• Suitable for indoor camera links considering specific conditions according to IEC 60664-1
• Machine polished and tested end faces
• Tactical tight buffered PUR cable
• Supports standard optical LC-Duplex connectors
• All metal housing cable connector with heavy duty cable retention
• Automatic sealing shutter with silicone gasket for dust and dirt protection
• Push/Pull locking mechanism
• No tools required to clean

Related Questions and Answers

Q: 1. I have the D1 Air 500. The power cord often comes a little loose, causing me to lose power, especially when I have the strobe in almost vertical position. I've tried taping the cord in place, but it still comes loose. Does anyone else have this problem? I wonder if this right angle type of plug would help. Might be easier to secure with tape. It's so much cheaper than the Profoto cord, but I assume it would work just as well, right? https://www.bhphotovideo.com/c/product/917037-REG/c2g_27909_10_18_awg_universal.html

A: For the D1 or D2 you would want to use this cable https://bhpho.to/2VF2E0N. Its a heavier gauge and designed to be able to handle the load of the flash. Using the thinner cable can run into issues with power delivery. Cables will wear over time and need to be replaced.

Q: 2. How hot does the d2 get? Can it work with Profoto OCF gear?

A: Being that the Profoto D2 has a 300 watt halogen modeling lamp is it not recommended for use with the Profoto OCF series modifiers due to a issue with heat.

Q: 3. Can I put the glass dome on it?

A: Yes, the Profoto Glass Dome for D1 and B1 Monolights (Frosted, Minus 300K), BH # PRGD300D1 would be compatible. http://bhpho.to/3clzwWm

Q: 4. Can a camera sync cable be used instead of the remote?

A: absolutely! sync port is a mini phone on the bottom backside of the light.

Q: 5. If I buy Air Remote for Canon, could I use it also, for say, a Hasselbad or another camera system?

A: No, canon stuff is always a little wonky as Canon likes to lock there stuff from using non canon products. The Nikon TTL remote does work on other though.

Q: 6. Does the D2 Duo 500/500 AirTTL 2-Light Kit come with the Profoto Glass Dome for D1 and B1 Monolights - Frosted?

A: No, it does not come with the domes. That is additional, Profoto Glass Dome for D1 and B1 Monolights - Frosted B&H # PRGDD1 MFR # 101561.

Q: 7. Does HSS work over the entire power range or is it limited?

A: Not currently.

Q: 8. Why don't you list the replacement modeling light as an accessory? The specs section is useless in this regard

A: The modeling lamp replacements can be found in the lamps and flash tube section of the accessories. Here is a link the the lamp. https://bhpho.to/2WIObmg

Q: 9. I’m currently using a D1/500 with the Air Remote TTL-N. Will the D2 fire wireless in tandem with this set up?

A: You have to also connect the D2 Fixture in the same Group, or it's own channel.

Q: 10. Will the shaft of the 72" Wescott umbrella fit the D2?

A: Yes it will fit.