This 500' SMPTE Hybrid opticalCON DUO to PUW LEMO Singlemode Outdoor Fiber Cable from Camplex is a SMPTE 311M compliant broadcast interconnect cable suitable for outdoor and indoor use. It features a Neutrik OpticalCON DUO NO2SX connector and PUW LEMO connector. The OpticalCON connector is COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. It has common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55dB typical return and comes with diagnostics documentation.

The opticalCON connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

311M Compliant Interconnect Cable    OpticalCON DUO NO2SX / PUW LEMO    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55dB Return Loss    IP65 Waterproof in Mated Condition    Diagnostics Documentation Provided

• SMPTE 311M compliant interconnect cable
• COCA factory terminated OpticalCON DUO NO2SX connector, tested to GR-326-CORE endface standards
• PUW LEMO connector
• Tested for < -55dB typical return loss
• IP65 waterproof in mated condition
• Assembled using the Neutrik opticalCON ADVANCED system
• Two channel fiber optic connection system

• Overall copper braided shield and stainless steel strength member
• Suitable for indoor camera links considering specific conditions according to IEC 60664-1
• Machine polished and tested end faces
• Tactical tight buffered PUR cable
• Supports standard optical LC-Duplex connectors
• All metal housing cable connector with heavy duty cable retention
• Automatic sealing shutter with silicone gasket for dust and dirt protection
• Push/Pull locking mechanism
• No tools required to clean

Related Questions and Answers

Q: 1. Why don't you list the replacement modeling light as an accessory? The specs section is useless in this regard

A: The modeling lamp replacements can be found in the lamps and flash tube section of the accessories. Here is a link the the lamp. https://bhpho.to/2WIObmg

Q: 2. Does the D2 Duo 500/500 AirTTL 2-Light Kit come with the Profoto Glass Dome for D1 and B1 Monolights - Frosted?

A: No, it does not come with the domes. That is additional, Profoto Glass Dome for D1 and B1 Monolights - Frosted B&H # PRGDD1 MFR # 101561.

Q: 3. Does the D2 need to be fired by Air Remote TTL to get 10 frames per sec or will it work with Pocket Wizards etc.?

A: Does work with the Pocket Wizard.

Q: 4. Will the shaft of the 72" Wescott umbrella fit the D2?

A: Yes it will fit.

Q: 5. Will the profoto D2 fire in HHS (1/8000 sec) with a sync cable instead of using the air remote?

A: Unfortunately, HSS can only be utilized with the Profoto Air TTL remotes which are camera specific.

Q: 6. I have the D1 Air 500. The power cord often comes a little loose, causing me to lose power, especially when I have the strobe in almost vertical position. I've tried taping the cord in place, but it still comes loose. Does anyone else have this problem? I wonder if this right angle type of plug would help. Might be easier to secure with tape. It's so much cheaper than the Profoto cord, but I assume it would work just as well, right? https://www.bhphotovideo.com/c/product/917037-REG/c2g_27909_10_18_awg_universal.html

A: For the D1 or D2 you would want to use this cable https://bhpho.to/2VF2E0N. Its a heavier gauge and designed to be able to handle the load of the flash. Using the thinner cable can run into issues with power delivery. Cables will wear over time and need to be replaced.

Q: 7. What is the length of the power cord on the D2 Monolight?

A: Nominally 16 feet, the same as the D1 power cord.

Q: 8. Does HSS work over the entire power range or is it limited?

A: Not currently.

Q: 9. will the Profoto D2 Hyper sync with my Pentax 645 Z ?

A: Hypersync would be a feature available on the Pocket Wizard Mini and Flex system, which is only compatible with Canon or Nikon cameras. The same would apply for the Profoto Air TTL-C and TTL-N transmitters which also work only with Canon or Nikon and which uses high speed sync.

Q: 10. will this work on a Fujifilm camera?

A: You can use this monolight with a Fujifilm X series camera with the help of the Profoto Air Remote Transceiver B&H # PRAR. The monolight is manually controlled in terms of output, but this remote will allow to control the power settings from the camera position as well as fire it. Please see the image below for reference.