This 656' SMPTE Hybrid opticalCON DUO Single Mode Fiber Outside Broadcast Cable fromCamplex is a SMPTE 311M compliant broadcast interconnect cable suitable for outdoor and indoor use. It features a Neutrik OpticalCON DUO NO2SX connector on each end, COCA factory terminated and interferometrically tested to GR-326-CORE endface standards. The connectors have common LC contacts and a mechanical shutter system that shields against endface contamination. The cable is tested for < -55 dB typical return and comes with diagnostics documentation.

The connectors are assembled using the Neutrik opticalCON ADVANCED system, which adds lockable, waterproof metal caps and rubber guards, especially critical for outdoor applications. This improves the cable protection and water resistance in long-term use.

311M Compliant Interconnect Cable    OpticalCON DUO NO2SX Connectors    COCA Factory Terminated    GR-326-CORE Endface Standards    Neutrik opticalCON ADVANCED System    Tested for < -55 dB Return Loss    Diagnostics Documentation Provided

• SMPTE 311M compliant interconnect cable
• COCA factory-terminated OpticalCON DUO NO2SX connectors, tested to GR-326-CORE endface standards
• Tested for < -55 dB typical return loss
• Assembled using the Neutrik opticalCON ADVANCED system
• Machine polished and tested end faces
• Optical shutter mechanism for added protection
• Tactical tight buffered PUR cable

Related Questions and Answers

Q: 1. Can you feed a new XLR cable to replace the cable that’s already in it?

A: Yes. A cable, without a connector may be fed through the arm, tho it would require a "snake" to push or pull the replacement cable through.

Q: 2. If I only need 100' lines in the water, what happens to the extra lines?

A: The Gladius Mini S can be purchased with a 328' tether that's half as long as this one: https://www.bhphotovideo.com/c/product/1643299-REG/chasing_gms100_gladius_mini_s.html

Q: 3. Does this head use the same base plates as manfrotto?

A: No, this does not use the same quick release plate as Manfrotto. It uses the proprietary QR8PRO quick release plate. https://bhpho.to/3tqPKm6

Q: 4. We have quite a few VocoPro SilentPa 900MHz recievers. Will the SilentPa receivers also work with this SilentSymphony transmitter since they both run at 900MHz or are the recievers not interchangable?

A: This is compatible with all SilentSymphony 900 MHz receivers.

Q: 5. Does this come with the travel case?

A: no this does not come with a travel case

Q: 6. Will the pin on the base fit a standard 5/8" receiver to mount the arm to a super clamp or similar?

A: No. The Auray BAI-2U Two-Section Broadcast Arm has a 1/2" mounting stud on the base and comes with an interchangeable combo mount that has a C-clamp and flange mount. The tip to mount the microphone has a 5/8"-27 male thread.

Q: 7. If the USB cable should stop working, can it be removed?

A: The cable is installed during fabrication and can't be removed or replaced. If you happen to experience an issue with the integrated cable for some reason, we would encourage you to contact us at info@gradusgroup.com or 212-594-2120 within the 1 year warranty term to arrange warranty service.

Q: 8. How much It's Maximum radius ?

A: 7.1 feet.Thank you

Q: 9. Im confused by earlier q&a in here,Is the max weight for camera rig 15kg alone, or 15kg included counterweights, which means around 7.5kg on each side?My rig weighs around 10kg.(Ursa Mini 4.6 with 70-200 2.8)

A: I spent a lot of time asking around on this one. I posted the original question. Some companies said they would check directly with iFootage, and I received opposing answers, both claiming certainty.I think we need clarity directly from iFootage about this.Think about it. If it's 15kg for the rig only, then their product might have to take double? to balance. Is it really that strong? And what about the difference between shortened and fully extended arm in terms of physical pressure.No. I still haven't been 100% certain of the answer.If you want, try it slowly. And monitor the structure very carefully.

Q: 10. I have a Miller set of sticks with 75mm ball mount. Will the crane fit onto these? There are no specs on the mounting options at the base of the jib.

A: Yes. It can mount to a 75mm ball mount as well as flat mount.