The CHAUVET DJ Nimbus Dry Ice Machine with Power Cord is designed for live performance applications such as for the theater or DJing. Simply fill the container with approximately 4.5 gallons of water, add up to 10 lb of dry ice, plug the unit into any standard wall outlet, and the device is ready to produce the dancing-on-a-cloud effect in 50 minutes. A second power cord is included with the unit, which can be connected to engage a second heating element and reduce the heat-up time to only 30 minutes. This may require a separate power breaker to operate in dual-element mode.

The output and flow of the cloud effect can be controlled using the multi-level control handle with a run time of approximately 6 minutes. The average reheat time is 30 minutes in single heating element mode and 15 minutes in dual heating element mode. Low-water and temperature sensors will automatically shut down the heating elements to protect the device.

Create Low-Lying Cloud Effect    Holds 4.5 Gallons of Water    Add up to 10 lb of Dry Ice    Uses Single or Dual Heating Elements    6-Minute Runtime    Plug-and-Play Operation    Low-Water and Temperature Sensors    Adjustable Multi-Level Control Handle

Creates a thick white cloud that hugs the floor

Plug-n-play operation heats water to optimal operating temperature

Ready to cloud in 50 minutes with single heating element mode, 30 minutes with dual heating element

Manipulate the output and flow with the adjustable multi-level control handle

Increase safety with low-water and temperature sensors that automatically shut off heaters

Related Questions and Answers

Q: 1. Does it include warranty? How long?

A: This unit has Limited 5-Year Warranty.

Q: 2. Is the door reversible, right hand or left hand open?

A: No, right hand open only.

Q: 3. In the humidity display, image of droplets are flashing. Is this normal ?

A: Yes it is normal

Q: 4. Can the USA GF 920 karaoke player be connected to a pa amp system to increase the audio quality?

A: The Karaoke USA GF920 Multimedia Karaoke Machine has an RCA line output which could be used to connect to a PA system or mixer.

Q: 5. Does this power cord work with the Nikon SB-800 flash unit?

A: The Bolt CBP-UN Power Cord for Nikon Hot Shoe Flashes is not compatible with the Nikon SB-800. There is no cord adapter that works with the Bolt Universal Compact Battery Pack and the SB-800.

Q: 6. I live in Florida and therefore when I take my camera outside it fogs up. If I use this, would it also warm it to at least 80° so there is not such a differential between Air Condition room and the outside?

A: No, this doesn't have a heater element to it, just a dehumidifier effect. It does basically keep the same temperature as the interior room it's placed in. For example: I live in Hawaii and the non-air conditioned room my Ruggard is in is currently 84 degrees F and 79% humidity. Inside the Ruggard unit itself, it says it's 82 degreees F and 42% humidity. So the temperature is basically the same, but the humidity level is drastically reduced of course. I understand what you are aiming for by preventing fog - one idea would be to place the Ruggard in an area where the air conditioning isn't used such as a Garage. If that's not an option, could go down the path of jimmy rigging the unit with a very small plug in heating coil device and fishing the cord out of a hole drilled into the back or peel away just enough padding from the door edge to fish it through. This COULD be a fire hazard so I would suggest finding the exact proper heating coil that's well insulated, and putting in small digital portable temperature display unit to keep an eye on the heat temperature/consistency.

Q: 7. Does this cable release work on the 907X 50C?

A: Yes, it is compatible with the 907X.

Q: 8. Can you use this to dry out 3D filament?

A: Yes this should help to dry out 3D filament as well as camera equiptment.

Q: 9. Does this cable release work on the 907X 50C?

A: Yes, the Hasselblad Release Cord X for X1D-50c Camera is compatible with the Hasselblad 907X 50C Medium Format Mirrorless Camera.

Q: 10. Will this work with haaselblad 907x 100c camera?.

A: Yes, the Hasselblad Release Cord X is compatible with the Hasselblad 907X CFV 100C.