The white HS7 Powered Studio Monitor from Yamaha is a 2-way reference speaker that is designed for mixing and monitoring in your home or studio. Equipped with a 95W bi-amplification system that powers a 6.5" woofer and a 1" tweeter, the HS7 is designed to offer maximum headroom, minimal distortion, and an extended response up to 30kHz. The HS7 has both an XLR and 1/4" TRS input that accept either balanced or unbalanced signals for maximum flexibility in a variety of studio setups.

95W Total Output    6.5" Cone Woofer    1" Dome Tweeter    Room Control Response Switch    High Trim    1x XLR Input    1x 1/4" TRS Input    Low Resonance Enclosure

HS Series cabinets are designed to eliminate unwanted resonance and increase the

accuracy of sound reproduction to their extreme limit. The enclosures are constructed from

a dense MDF with a damped acoustic response. HS Series engineers also employed a traditional three-way mitered-joint technique. Common to architectural design, this construction firmly anchors the corners of the enclosure to improve durability and eliminate unwanted resonance that can influence overall sound

Speaker port design can greatly influence the clarity of overall sound. Often a vortex at the either end of the port can generate air vibrations inside of the port, causing unwanted noise. By adopting a noise reduction technology that incorporates an analysis of

a visual representation of the sound, Yamaha's engineers are able to control and reduce the vortex. Through this analysis Yamaha has arrived at a port design that reduces noise up to 6dB

HS Series full-range models feature two response controls with settings that allow them to adapt to the surface acoustics of rooms of varying shape and size. ROOM CONTROL allows you to

attenuate the unnatural, exaggerated low-end that can often occur when speakers are placed

next to walls, while HIGH TRIM allows for more flexible control of high frequency response.

For inputs, HS full-range speakers can accommodate a range of balanced and unbalanced sources such as mixers, keyboards and audio interfaces with XLR and TRS phone jacks

Related Questions and Answers

Q: 1. Are casters available for this item?

A: No, casters are not available for this type of stand. They do make stands with casters that have a flatter leg extension but these types of C-Stands are a stand alone type & do not incorporate the use of wheels.

Q: 2. Is the back of the card blank empty or there is some wording on it? The pocket size seems to have something on it which is rather annoying as im looking for an empty rear side card to manually adjust the WB on camera itself than post process. Thanks

A: I've used the front for manual white balance, it works well. (Depending on your camera)But no, the back has a bunch of info, branding, a light spectrum guide, ect. Actually, I just looked at it closely, and the back is a different color. It appears the certified grey side is actually adhered to a sturdy light grey plastic layer.

Q: 3. Is it possible to use the speaker with a media play instead of a computer, by using the USB port to connect the power to the wall and using the 3.5 audio port to connect to a media source?

A: Yes, it is possible to use the non-Bluetooth Line input for an external device without the use of a PC. In this case you are not using Bluetooth which does not require a BT capable device driving it, only one capable of pushing an analog signal out over a wire.

Q: 4. Can this be used with a ptz?

A: While mounting a PTZ camera to the Impact Turtle Base C-Stand (10.75', Chrome) may be possible with the correct mount adapter for your PTZ camera, I would highly recommend using a more stable mount like a tripod instead.

Q: 5. Does this stand feature air/spring cushioning?

A: No, the Impact Turtle Base C-Stand - 10.75' does not feature a spring or air cushioning mechanism.

Q: 6. Can this unit be mounted on a wall?

A: This GOgroove SonaVERSE UBR USB-Powered Soundbar (White), would not have amounting option.

Q: 7. Is this card appropriate for manually adjusting white balance in camera?

A: Yes, it is designed for that. I use it that way and it works perfectly.

Q: 8. Does it have an optical slave?

A: The light does have an optical slave.

Q: 9. Can I attach a 50 inch Sony flat screen TV to the mount supplied? How tall is the stand when extended?

A: The Impact Studio LCD Monitor Support Kit comes with a VESA mount. If the TV has that mount, it will attach to that. Note: The stand supports no more than 22 lb, and if your TV is say 20 lb or more, it is not recommended. The stand can go up to 10.75 feet.

Q: 10. What is the packed length with legs detached? This question was asked but there are conflicting answers.

A: Box Dimensions (LxWxH) 53 x 14 x 3"