The black DB-RLC3 Remote Level Control, Preset Level from RDL is designed to directly interface with control modules which feature a 0 to 10 VDC control input utilizing an external 10kΩ resistive control, such as the ST-VCA3, RU-VCA2A and RU-VA6A voltage controlled amplifiers. The DB-RLC3 has four momentary push buttons, each corresponding to one of four levels selected.

In a typical installation, the DB-RLC3 is wired to a RDL VCA. The DB-RLC3 runs from the same power supply as the VCA. When power is applied, the unit defaults to the NORM level. One higher level, HIGH, and two lower levels, LOW and MIN, are then available for selection. When the device is set to the HIGH position, the VCA is at maximum gain. The NORM, LOW, and MIN levels are each adjustable using trim pots on the side of the level control. The adjustments are concealed once the unit is installed.

The DB-RLC3 is constructed on a durable polycarbonate-faced, powder-coated steel panel. Electronics are housed in a metal enclosure featuring a rear panel detachable terminal block for easy wiring.

Four momentary pushbuttons, each corresponding to one of four levels selected; LOW, MIN, NORM, and HIGH

Once installed, the adjustment trimmers are concealed from the user

Related Questions and Answers

Q: 1. Will this convert a mono XLR out from a mixer's main output(+4) to a dual mono signal over 1/8" TRS to a suitable level for a camcorder?

A: The ART Cleanbox Pro is neither ideal, nor made for that use. You would want to use something more like B&H # SES43DBMZ2XJ or B&H # KOCMX2V2 for that application.

Q: 2. Will this fit the RF 85mm f/1.2?

A: The PortaBrace Pro-Level Padded Lens Cup with Strap for Canon EF 85mm Lens (Black) would be too small for the f1.2 RF lens. It was made for the Canon 85mm f1.8 EF specifically.

Q: 3. Can this convert a 3.5mm mono mic level input to line level signal?

A: No, the ART CLEANBoxPro Bi-Directional Level Matching Converter is not a preamp, and will not properly amplify a mic signal coming from a 3.5mm cable.

Q: 4. Will this fit the Sunpak 5858D tripod?

A: I don't know. I bought mine to use on a 6400UT.

Q: 5. Will this clamp help me to quickly move my camera from Ronin SC to Manfrotto mvmxpro500?

A: No Manfrotto mvmxpro500 does not take Arca plate

Q: 6. Will this fit a sunpak 6000PG tripod?

A: If you have the 6000PG tripod the correct quick release plate is, Sunpak 620-749 Quick Release Plate B&H # SUQRCPG MFR # 620-749.And if you have the Platinum Plus 6000PG tripod the listed plate for that one is, Sunpak Quick-Release Plate for UltraPRO 423 Tripod B&H # SUQRPUP423T MFR # 620-754.

Q: 7. 1. Would this fit to Sunpak 7575?2. What is your return policy?

A: No, that plate is for a different tripod head. The 7575 uses this quick release plate,Sunpak Quick Release Plate for Ultra 7575 TripodB&H # SUQRU757 ? Mfr # 620-733http://bhpho.to/MIJOAy The return policy is 30 days and that can read at this link,http://bhpho.to/19fUBwL

Q: 8. In the LB-90R can the 1/4”-20 top mounting stud be changed to a 3/8”-16 stud?

A: The top mount screw on the Sunwayfoto LB-90R Leveling Base with Panoramic Platform and External Bubble Level (Black) can't be changed to 3/8"-16. However, you could use the Oben 3/8"-16 to 1/4"-20 Reducer Bushing, BH #OB1039, in the 3/8"-16 socket.

Q: 9. Will this work with the output of a Vocaster 2 (1/4") to Mic input of a ATEM Mini Pro (3.5")? If so what connectors do I need?

A: The ART CLEANBoxPro does not convert Line level to Mic level, so it would not be suitable for connecting the monitor outputs of an interface to the mic input of a switcher. However, its 3.5mm output could be used in conjunction with an attenuator cable such as BH #WHH4NL3.5 for this purpose.

Q: 10. Will this work for the QSX Digital Ultra Pro?

A: No, that is not compatible. It seems the plate may no longer be made that works with that head.