The DB-TPR2A Active RCA Stereo Audio Output over Dual RJ45 Receiver Module from RDL is a CAT5 to RCA phono receiver module. The The DB-TPR2A features a black front-panel laminate. The DB-TPR2A module features two RCA phono jack outputs, one for the left channel output and one for the right channel. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the output jacks at the standard -10 dBV consumer level.

This module receives signal from only two cable pairs, so the DB-TPR2A module has a second RJ45 jack to connect cables to additional receiver modules. A separate single-pair receiver may be chained to the second RJ45 jack. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.

The DB-TPR2A may be powered directly from a 24 VDC power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The DB-TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. This module is designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The DB-TPR2A unit can be mounted in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes.

Two unbalanced -10 dBV phono jack audio outputs

L (Left) output from pair B, R (Right) from pair C

Signal and Power pair pass-through on RJ45s

Remote powering through twisted pair cable

Fused local power feeds all connected modules

Local power input on terminal block

Blue LED indicates module is powered

Daisy-chain with additional format-A receivers (sold separately)

Precision active balanced circuitry

Related Questions and Answers

Q: 1. Can I connect speakers to this ES202 then to my TV?

A: You mean R-S202 ? Please detail what you want. Are speakers not loud enough?

Q: 2. Is there a way to set a password so others can't connect to it?

A: The short answer is no, The unit is a receiver only, and is always ready to pair when not already paired. While DN-200BR is paired with a Bluetooth device, other Bluetooth devices cannot pair to it. You must unpair (disconnect) the current Bluetooth device from DN-200BR to make it available to others. If it is a\already paired, and both devices are always on, nothing else will be able to pair to it.

Q: 3. connecting R-S202 to Pioneer FS52 Floor standing speakers should I use regular wiring or bi-wiring? Which is one is better?

A: The Yamaha R-S202 Stereo Receiver with Bluetooth (Black), B&H # YARS202BL, should sound more or less identical regardless of whether it has standard wiring or bi-wiring. Bi-wiring can potentially reduce resistance within the wiring, but this difference would likely not be audible on any equipment being used outside of a professional studio, and therefore wouldn't make much of a difference on this particular receiver.

Q: 4. Does this device work when the air temperature is over 90 degrees, like an outdoor concert in the summer?

A: The recommended operating temperature for the Denon DN-200BR Stereo Bluetooth Audio Receiver is 41 to 95°F. It is not recommended for use when the environmental temperature is above 95°F or below 41°F.

Q: 5. Can I hook a turntable to this?

A: Yes, you can hook up a turntable to the R-S202 receiver.

Q: 6. Will this product function with wireless Bose headsets from Marshall Amps?

A: No

Q: 7. Can the antenna be disconnected and attached to an extension cable to mount out side of rack enclosure ?

A: Hi, thanks for asking!No, the antenna is not detachable.

Q: 8. how many blue tooth devices can be hooked up at once?

A: While the DN-200BR is paired with a Bluetooth device, other Bluetooth devices cannot pair to it. You must un-pair (disconnect) the current Bluetooth device from DN-200BR to make it available to others.

Q: 9. How much clearance will this need for proper ventilation/cooling? The project I'm working on probably won't afford much space.

A: Pyle Pro does not specify clearance for installation, other than *Use the amplifier only in well-ventilated installations. You would want to allow some airflow to keep the component from over heating. An inch on all sides should be sufficient, but use your own judgement according to your particular setup.

Q: 10. I want to understand pairing with this. Most Bluetooth devices can have multiple devices paired to it and some allow multiple devices to be connected and some only one to be connected. But even the ones that only allow one device to be connected allow multiple to be paired. So, if 1 and 2 are paired, then 2 can't connect while 1 is connected but it can connect as soon as 1 disconnects. If I am reading this correctly only one device can be paired. So for 2 to connect, 1 would have to disconnect and unpair and then 2 would have to pair and connect. Then for 1 to reconnect, 2 would have to disconnect and unpair, 1 would have to pair and then connect. Do I have this correct?

A: You've got it.