The Sound Devices BNC M/M Word Clock Cable for AES/EBU (10 ft) from Laird Digital Cinema is a high-quality BNC male/male cable for AES/EBU audio signals. It's designed to word clock specifications, which ensure reliable timecode management.

Designed to Word Clock Specifications    Ensures Reliable Timecode Management

Related Questions and Answers

Q: 1. Can anyone recommend a wireless system to send audio from the balanced MixPre outputs to a BMPCC 6k Pro?

A: To send audio wirelessly from the balanced outputs on the Sound Devices MixPre-10 II Multitrack Recorder to a Blackmagic Design Pocket Cinema Camera 6K Pro, you can use the Remote Audio Unbalanced Adapter Cable TA3F to 3.5mm Locking TRS for Sennheiser Transmitters (B&H # RECASENSK1TL) or the Cable Techniques RX-TRSBL Locking 3.5mm Male to TA3F Receiver Cable (B&H # CARXTRSBL) to connect the TA3 (3-pin mini-XLR) output from the MixPre-10 II to a Sennheiser EW series wireless bodypack transmitter or a similar type of wireless bodypack transmitter. For example, you can use a wireless microphone system like the Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System which will accept line level input signal. The Sennheiser system has only one channel, so you will need to purchase two of the Sennheiser systems if you want to send wireless audio from both the left and right outputs on the MixPre-10 II to the BMPCC camera. To connect the output from the wireless receiver to the TA3 input on the camera, you can use the Kondor Blue Mini-XLR Male to Locking 3.5mm Stereo Cable for BMPCC 6K & 4K (B&H # KOMINIPLSBK).

Q: 2. am I crazy or does this device shut off all mic inputs other than 1-4 in ambisonic mode? this would mean while using the ambeo i cannot plug in any other microphones?

A: That is correct, only channels 1-4 can be operated for ambisonic recording .

Q: 3. does the Mix Pre ii it's possible record to a USB C flash drive?

A: According to Sound Devices approved media list; it is compatible with USB-C flash drives. https://www.sounddevices.com/mixpre-series-approved-media-list/

Q: 4. My 744t charges it L-series battery whenever its plugged into power from the hirose input. My question: Does the MixPre 10T charge the L-series batteries while being powered by the hirose cable?

A: No, the MixPre-10T does not have the ability to charge L-series batteries when the recorder is powered using the Hirose cable.

Q: 5. are you sure that the 2 x TA3 3-Pin Female Balanced Line Output are Female and not Male which is more logic?

A: They are male. Each port has 3 pins (not holes).

Q: 6. Does this only mix to stereo or can it upmix to 5.1?

A: The Sound Devices MixPre-10 II Field Recorder will only mix to stereo. For a 5.1 mix, you can upload the tracks to your computer's DAW.

Q: 7. Do both batteries need to be mounted at the same time? The mixpre does not offer an option for a 7.4 watt power source-only the 14. Can I power with one and select that output? Or is it recommended to utilize both? If I can power with one battery at a time, what power setting do you recommend selecting?

A: I am not seeing an option for both batteries to be used at the same time.

Q: 8. Do I need a buy an external Time Code or the integrated one is good enough?

A: This unit has a built in time code generator, although it will sync if you prefer to use an additional generator.

Q: 9. Can I connect a black lion word clock when using this as a recording interface?

A: Yes, the Sound Devices MixPre-10 II Multitrack Field Recorder can be connected to a Black Lion Word Clock. As per Sound Devices, just set your BNC input and/or output to WC.

Q: 10. will this battery kit work on the mix pre 6?

A: Yes, the same battery kit does work with the MixPre-6 II. We do offer the same batteries and accessories packaged together with the MixPre-6 II recorder which is B&H # SOMIXPRE6IIK.