The white D-RLC10 Remote Level Control from RDL is a rotary remote level control that provides user adjustment at a single or multiple locations. This control is designed to fit any standard single-gang electrical box. The optical encoder technology allows continuous knob rotation with a comfortable adjustment rate and long-term, trouble-free, and noise-free operation. The control directly connects to any RDL, VCA, and OEM equipment with 0 to 10 VDC ramp inputs.

The D-RLC10 may be connected to a ramp-controlled VCA using a single-pair shielded audio cable or unshielded cable. A rear-panel switch configures the control as the MASTER. The MASTER mode causes this control to drive the 0 to 10 VDC ramp output and to monitor its pulse terminals in case any other -RLC10 controls are connected.

As many as nine additional -RLC10 controls may be wired in parallel with the MASTER control using UTP cable (CAT5, CAT6, or equivalent). The rear-panel MODE switch on each additional remote control is set to SLAVE mode. Operation is the same for a single control, or for each control connected in a multiple control point installation. The 0 to 10 VDC ramp voltage is incremented up or down when the front-panel knob is rotated. Acceleration is provided so the rate of change is faster when the knob is rotated more rapidly, yielding a responsive feel and rapid elimination of acoustic feedback. The LED ring display encircling the control knob operates as a virtual pointer. When the D-RLC10 is not being adjusted, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity during adjustment. In the event of power loss, internal non-volatile memory stores the last level value. When power is restored, the 0 to 10 V output will return to the operating level present when power was lost.

Multiple -RLC10 controls set to the SLAVE MODE may be connected to an RDL RU-VCA2A or RU-VCA6A, utilizing the VCA as the ramp generator. This connection is also possible with OEM equipment accepting open-collector pulses that are compatible with the D-RLC10 output pulse rate and width.

Single or multiple control locations

Visual level display of operating level

Display is bright during adjustment and dims after adjustment

Related Questions and Answers

Q: 1. will RC-6 remote work with 1ds mark III?

A: No, the Canon RC-6 Wireless Remote Control is not compatible for use with the Canon EOS 1Ds Mark III DSLR camera.

Q: 2. Hi! What range could you reasonably expect this to work out to? I have the older remote that came with my Pentax K-5, and it only works out to about 10-15'.

A: Like the other Pentax infrared remotes, performance depends heavily on ambient light conditions. Outdoors in bright sunlight you should not expect more than 15 ft, depending on sun direction. Indoors or int dark conditions, 25-30 feet is reasonable.

Q: 3. will this work with canon rebel T100/EOS 300D?

A: No, this is not compatible with the 300D.

Q: 4. What about 5Dsr is that work with it?

A: Depends on if you will need the extra resolution, for printing or something like that.

Q: 5. Does cannon Rc-6 wireless remote control work for all digital Canon brand PowerShot SX540 camera's?

A: No there is no wireless remote for the SX540. You can use the built in wifi to use your cell phone or tablet as a remote.

Q: 6. Does it work with the M50?

A: No, the Canon RC-6 Wireless Remote Control is not compatible for use with the Canon EOS M50 Mirrorless Digital Camera. The Canon EOS M50 Mirrorless Digital Camera does not have an infrared sensor on the front of the camera to communicate with the RC-6 infrared remote. As such, you would either have to use the Canon BR-E1 Wireless Remote Control, B&H # CABRE1, or you may use an Android or an Apple iOS smartphone/tablet with the Canon Camera Connect app installed to wirelessly trigger your camera.

Q: 7. I have the Canon Rebel T3 Camera. i recently ordered the RC-6 wireless remote for my camera. Is there a wireless remote setting on the Rebel T3 camera? I can not find that setting anywjere on my camera.

A: Unfortunately, the Canon EOS Digital Rebel T3 DSLR camera does not have an infrared receiver built into the camera, and it is not compatible for use with the Canon RC-6 Wireless Remote Control. The only remotes that are compatible with the Canon EOS T3 would be ones that plug into the 2.5mm sub-miniphone remote terminal on the left-hand side of the camera, such as the Canon RS-60E3 Remote Switch, B&H # CARS60E3. If you are looking for a wireless remote that would be compatible for use with your camera, I would instead recommend the Vello FreeWave Wireless Remote Shutter Release (Canon Sub-Mini Connection), B&H # VERWC1, which uses the 2.5mm sub-miniphone remote terminal.

Q: 8. Does this work with canon rebel t5i?

A: Yes, it does

Q: 9. will this work with the canon rebel T100/EOS 300D?

A: This remote is not compatible with the Canon Rebel T100.

Q: 10. I can't make it work with the EOS utility tool on my laptop in the live view mode with the studio flashes on... Can u help me please?

A: I was having the same issues...