Bitlocker With Pin

Kupo Snap-in Right-angle Pin

Product Code: ga17463
Availability: In Stock

$63.00 $90.72

Qty

19 reviews Write a review

Description
Reviews (19)

This Snap-In Right-Angle Pin from Kupo provides a simple solution for offset rigging of fixtures equipped with 5/8" baby receivers. It features a knurled baby pin on one end and a specially machined hex pin for quick attachment to select clamps.

Baby Pin on One End, Hex Pin on Other For Convi & Super Viser Clamp Systems Steel Construction

Parameters
Mounting	5/8" / 16 mm Stud
Material	Steel
Dimensions	L: 7.4 x W: 3.6 x H: 0.6" / L: 18.8 x W: 9.1 x H: 1.5 cm
Weight	0.91 lb / 0.41 kg
Packaging Info
Package Weight	0.95 lb
Box Dimensions (LxWxH)	12.047 x 7.8 x 0.158"

Offset mounting of lights is a common technique to achieve ideal positioning or to add fixtures to an existing rig. The Snap-In Right-Angle Pin simplifies this process making it an invaluable tool in a complete grip kit, especially when paired with Convi or Super Viser Clamps available separately from Kupo. This combination allows grips to rig additional mounting points for lights or modifiers along an extended C-stand shaft while maintaining the appropriate mounting angle to prevent slippage. This instantly adds efficiency to a technician's workload by reducing the number of stands, sandbags, and accessories that must be lugged to set.

Related Questions and Answers

Q: 1. Is this working for MixPre 10 II as well?

A: Yes, the CAMVATE D-Tap to 4-Pin Hirose Cable is compatible for use with the Sound Devices MixPre-10 II Multitrack Field Recorder.

Q: 2. What's the diameter and threading on the threaded end?

A: The thread on the end is 3/8".

Q: 3. Can this power a Small HD 503 monitor?

A: The SmallHD 503 does have a 2 Pin Lemo connection for power. However you may want to stick with their official power cable which is BH #SMPWRDTAPL36. https://bhpho.to/3l6TPYR

Q: 4. Whats the voltage rating for this cable?

A: Manufacturer does not explicitly define voltage rating on this cable, but they do state compatibility with the following: Teradek Bond ARRI RED Paralinx Preston Transvideo Offhollywood Switronix Panasonic, which would suggest the cable is adequate for most v-mount and/or gold mount applications.

Q: 5. Does anyone make this device with round 5/8" pins on both ends instead of the hex head 5/8" pin on one of the ends?

A: The Kupo Snap-In Right Angle Pin is designed for use in a Super Clamp or a Convi Clamp which use a female hex connector. Unfortunately, we do not have a similar item as the above that only uses round connectors. The closest alternatives that may work for your usage needs would be the Matthews Baby 2Fer Adapter (Triple), B&H # MAB2FA, or the Kupo EZ Grip Twins, B&H # KUKG300812.

Q: 6. Can this cable be used to power a Teradek Bolt 500 XT?

A: Yes it can.

Q: 7. Will this pin also work with the Manfrotto 035 and/or the Avenger Super clamp?

A: This will work in a superclamp.

Q: 8. Is this an old picture? Do the 5/8" pin have the "Anti-Twist Knurling"? Or is it just "glossy and smooth" without this rough surface where the screw should be screwed into the pin?

A: It does have "Anti-Twist Knurling"

Q: 9. Can this cable work with the teradek Cube 655?

A: Yes, this cable will work with the Teradek Cube 655.

Q: 10. What's the cable length?

A: The CAMVATE D-Tap to 4-Pin Hirose Cable (Right Angle) measures 14.9" Coiled and 29.5" stretched out.

Samuel	27/09/2024
Slim, strong Cardellini w/ bonus hex baby pin receiver built in One of the better Kupo products. I have the 9 and 4 - both get lots of use. 5

Ron	25/09/2024
Great, secure mounting option. 5

Lars	02/09/2024
By adding a baby pin on the other side, I was able add a grip head on BOTH ends to accommodate a tricky rig on a my dolly (sorry, no pic to show - we were too busy to show off...). As usual, Kupo has shown decent design ideas and a reliable, strong build for the money. 5

Shawn	28/08/2024
I have not used it yet. I use a variety of clamps and stands in my classroom and I added this clamp to variety I already have and use. 5

Marcin	14/08/2024
The best super clamp I ever bought. It will help you with all the super heavy duty stuff. I mounted it on my tall boy 142 MINIVATOR stand. Great grip! 5

Michael	29/07/2024
This is a very rugged, well-built clamp providing a very solid mount for a mono-bloc or anything else with a built-in, female baby-pin. This is an invaluable accessory in my studio... enough so, I have a half-dozen of various lengths. 5

Frank	22/07/2024
feels real well made and fits snugly into the super clamp. Kupo makes great products. 5

David	15/07/2024
I'm not sure what to add except that it's a perfect example of bent, machined metal that works perfectly. 5

indianajohn	12/07/2024
This is basically a cardellini that has an extra baby pin receiver on one end. If you're familiar with cardellinis, this one is as good as any I've used. If you've never used one, it'll clamp just about anything to just about anything else! Much more secure than a mafer (especially on flat surfaces). ONE MINOR CON --- They're so nice, they seem to disappear from set more often than other items!!! 5

Rebecca	24/06/2024
I was going to return this clamp. I bought it to use to hang an Aputure light, but I figured something else out, making this sort of expensive clamp, superfluous... or so I thought. I found myself needing a hair light for a shoot, and the only light available to me was an Arri tungsten fresnel with no available stand. I grabbed this powerful clamp, mounted to a bookcase, and hung the light with ease. The clamp was actually overkill. It’s solid and sturdy and can hold a ton of weight (I think it’s rated for over 60 lbs!), and I will keep this clamp in my camera bag forevermore. 5