The Roto Mil-Std Waterproof Case 24" Deep with Layered Foam from SKB is a rugged and durable case for your photo, video and audio equipment. This linear low-density polyethylene case contains layered convoluted foam for product protection. It's ATA 300 (Airline Transportation Association) rated; water and dust tight and made to take a beating. It also comes with handy ambient pressure equalization and breather valves. The case is secured with stainless steel latches and hinges, and carried by recessed handles located on three sides. The case is impact, UV, solvent, corrosion and fungus resistant.

Rotational molding is a 3-stage heating process that results in evenness all around the edges of the case. The polyethylene material is inserted into a mold, and then gradually rotated until the material sticks to the edges of the mold in an even pattern. Once cooled, this plastic material forms a strong bond that minimizes sagging and potential collapse.

Holds Delicate Electronics,Cameras,Mics    Gasketed, Waterproof, Airtight    Impact-Resistant    UV, Solvent, Corrosion,Fungus-Resistant    Pressure Relief / Breather Valves    Stainless Steel Latches/Hinges    Rotationally Molded Polyethylene    Recessed Carry Handles

Related Questions and Answers

Q: 1. Has anyone had success adding a lid organizer to this case? If so, which one? Thanks!

A: Pelican lid organizers are compatible only with Pelican products.

Q: 2. TSA Locking latch kit for this particular model?

A: You could use a TSA Lock accessory with the iSeries DSLR Pro Camera case, yes.

Q: 3. Does this case fit a Panasonic GH4? And if not, what's the best case for one?

A: I use this case for a Canon T5i with a 100_400 lens. Plus two additional lens that are safe and well protected.

Q: 4. What is the diameter of the two lens holes?

A: The lens space diameter on the pre cut foam that comes with SKB iSeries DSLR Pro Camera Case I (Black) is 91mm. The hight is adjustable from 5 inches to shorter lenses.

Q: 5. I would need something like this, with these dimensions, but without the hard case, and the inserts would need to have a zipper on top. SKB 3I-1610-5DT Mil-Std Waterproof Case 5" Deep with Think Tank Designed Dividers (Black)

A: The closest option would be the Dot Line StowAway Insert Gear Case, BH # DOP300 https://bhpho.to/3EUwMe2

Q: 6. What are the exterior dimensions?

A: Exterior Length:21.26 in Exterior Width:16.75 in Exterior Depth 9.83 in Exterior Cu. Volume: 2.03 cu ft

Q: 7. Will the cut-out in this case fit the GoPro Hero 4 Black?

A: Sorry, we don't own a 4 - we have a 2 and a 3 packed into it and love it for those. Think the 4 may be a little smaller, so yes it will fit, not sure how securely.

Q: 8. Can the Sony A7SIII be compatible with this case or only the A7RIV?

A: Yes, the SKB iSeries 1309 Waterproof Case for Sony A7R IV Camera will also fit the Sony a7S III Mirrorless Camera. The camera is only 2mm thicker than the Sony a7R IV Mirrorless Camera.

Q: 9. Can SKB I series 1309 hold canon 1DX mark II and 7D mark II

A: Hi Ganesh, The 7D mark II will be able to fit into the case vertically without a battery grip, but you would need to lay the 1DX flat to fit it into this case. We have a new size coming out with the Think Tank dividers that will be able to fit in the bodies vertically as well as lenses. At this point it will take 2-3 months to be available. The model number will be 3i-1510-9DT. Another popular option if you would like a little more space and wheels is our 3i-2011-7DZ. Thank you,Will

Q: 10. Will the cut-out in this case fit the GoPro Hero4 Black camera?

A: Yes it worked great. Trust any case from skb, to quality.