The black FP-XMLPAB Flat Panel Articulating Mount from Video Mount Products is used for mounting a single 32 to 52” flat panel display. This low profile mount features a closed depth of 1.5" and a full extension of 16.2" along with a fully adjustable 15° tilt, 3° list adjustment, and ±45° of rotation. These adjustments allow you to easily position your flat panel for optimal viewing. It accepts pad locks for security.

Holds 32 to 52" flat panels

Maximum Mounting Hole Pattern: 600 x 400mm

Low profile depth of 1.5" when collapsed and 16.2" fully extended

Mounting rails accept padlocks

Clip-based cable management system

100lb load capacity

Black powder-coat finish

Related Questions and Answers

Q: 1. I see the barndoors for this, but not the gels made to fit. Aren't there gels mad to fit right into the barndoors?

A: I haven't come across gels specifically made for the Dracast Led500. B&H has a lot of gel packs, many are 12 by 12 which you can just cut in half and slide right into the barndoors. I went to a local photo store and bought gel sheets, very cheap, and just cut them to fit the frame. I also got an appropriate color gel to change the balance to tungsten.

Q: 2. I have two 27in monitors will are the arms long enough to have both side by side?

A: You should no have issues mounting two 27" monitors with this mount.

Q: 3. How well will this work with Nikon D780 & Nikon 200-500mm lens?

A: The Benro Classic Video Monopod with S2 Pro Flat Base Fluid Video Head has a maximum load capacity of 5.5 lb (2.49 kg). The combined weight of the Nikon D780 DSLR Camera and the Nikon AF-S NIKKOR 200-500mm f/5.6E ED VR Lens is 6.92 lb (3.14 kg). As such, I would not recommend using the Nikon D780 DSLR Camera and the Nikon AF-S NIKKOR 200-500mm f/5.6E ED VR Lens on the Benro Classic Video Monopod with S2 Pro Flat Base Fluid Video Head.

Q: 4. How long would it run with (2x) 150wh batteries?

A: The run time would be about an hour.

Q: 5. Was there supposed to be an ac adapter ?

A: An AC adapter is included with this panel,

Q: 6. Will the clamp fit through a 2.5 inch hole? My cubicle backs up to a wall, i'd have to insert the clamp into the extra cable hole in the desk.

A: It depends on the exact shape and depth of the hole. The mounting flange is just shy of 2.5 but is D shaped (to go along a wall). The flange may or may not fit into the hole as the longest distance from the corner of the D to the opposite rounded edge is closer to 3 . However the clamping depth/height may allow for the rounded portion to fit to the hole and allow you to bring the entire clamp forward so that the rear-flat part of the D can take up the diameter of the hole. If the hole is only 2.5 and the desk thickness is more than 1.5 you might not be able to fit the clamp.But if the desk is about 1.5 and the hole is a generous 2.5 you will probably be fine.

Q: 7. What is the diameter of the lower part of the plate that extends into the spider?

A: The lower part has a 70mm diameter.

Q: 8. How far will the arm extend from the mounting pole?

A: 16.3" / 41.3 cm

Q: 9. Will this work with the Litepanel Gemini 1x1?

A: According to Litepanels, the Litepanels Dual Battery Bracket for Gemini 2 x 1 Soft LED Panel (V-Mount) is compatible with the Gemini 1 x 1.

Q: 10. Is there any way to mount this on a C stand?

A: The Gabor MD-AD13MB LCD Monitor Desktop Mount with Articulating Arm (Black), BH # GAMDAD13MB, will not mount safely to a C-stand.