You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Canare Male To Right Angle Male Hd-sdi Video Cable (blue, 50')

Canare Male To Right Angle Male Hd-sdi Video Cable (blue, 50')
  • Product Code: ga175282
  • Availability: In Stock

$239.85 $314.20

The blue Canare L-5CFW RG6 BNC Male to Right Angle BNC Male HD-SDI Video Cable is a 50' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable    BNC Male to Right Angle Male Connectors    Solid Copper Center Conductor    Foam PE Dielectric Insulation    Dual Copper Braid    100% Sweep Tested

General
Connector 11x BNC
Connector 21x BNC
Coaxial TypeRG-6
Cable Length50' / 15 m
Interface12G-SDI
SMPTE StandardsSMPTE 259M/292M/425M/ST 2081/2082-1
Wire Gauge18 AWG
Weight3.2 lb / 1.5 kg
Packaging Info
Package Weight3.05 lb
Box Dimensions (LxWxH)9.6 x 5.6 x 1.7"

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. Will this also work with the bmpcc4k?

A: No it will not.

Q: 2. Does it work with Hero 8?

A: Yes this unit in compatible with the GoPro HERO 8

Q: 3. Will this cable work for a Sony Alpha7Rii to copy photos and videos to a PC?

A: Will not. Sony uses a different port than the traditional USB3 mini.

Q: 4. Will this work with the Canon 70D?

A: Sorry, I'm not sure, I have a 5Ds, it works perfectly on the 5Ds

Q: 5. How noisy is the transmitter?

A: The noise produced by the CINEGEARS Ghost-Eye 600MP Wireless Transmitter is very low, if barely audible on a microphone.

Q: 6. Can this device pass full Ancillary Data? Particularly SDI Audio Channels 15&16, the channels used for Blackmagic's CCU data. I know some of these units either compress or strip down the audio channels if they're based on WHDMI chipsets.

A: I dont believe it passes the full ancillary data, not 100% on this. Worked on a set where they requested teradeks for this exact reason.

Q: 7. Is this cable compatible with Canon Mark 4?

A: Yes

Q: 8. Is this compatible with the Cinegears 150m Receiver?

A: No this is Not compatible with the Cinegears 150m Receiver

Q: 9. Will this work on my Nikon D810 and on my Mac Book Pro (on El Capitan OSX with USB 3)? I heard that Nikon uses USB 3.1 while El Capitan is on USB 3.0 making it not a reliable connection.

A: Go to TetherPro's web site. They have compatibility charts.

Q: 10. Which receiver should I use with this transmitter?

A: The Ghost-Eye 600MP Transmitter works with the Ghost-Eye 600MP Receiver. At the time of this posting we do not sell just the receiver. However we do have this same Transmitter in a Kit with a receiver, B&H # CI6635. You may want to consider purchasing this kit for both a Transmitter and Receiver. https://bhpho.to/2BGCwu2

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Lorex Coaxial To Ethernet Converter Kit

$299.94 $443.91

Arris Sb6190 Surfboard Cable Modem

$224.97 $337.45

Products You May Like

Camvate Cheese Plate Extension (6.1")

$44.70 $67.94

Schneider 4 X 5.65" 2mm Pink True-streak Filter

$1,174.50 $1,761.75

Tiffen Nd Filter (86mm, 3.3-stop)

$461.85 $632.73

Westcott Fj400 Ac Power Adapter And Cord

$119.70 $161.59