Portable Charger Wh

Turbosound Nuq102-an-wh 600w 2-way 10" Full-range Powered Loudspeaker With Klark Teknik Dsp Technology And Ultranet Networking (white)

Product Code: ga175438
Availability: In Stock

$3,597.00 $5,575.35

Qty

0 reviews Write a review

Description
Reviews (0)

The white NuQ102-AN-WH 600W 2-Way 10" Full-Range Powered Loudspeaker from Turbosound is ideally suited for a wide range of portable and fixed-installation speech-and-music sound-reinforcement applications. Designed to work individually without a controller, the NuQ102-AN-WH Loudspeaker provides optimal performance for FOH, sidefill, and delay-line loudspeakers, and is an ideal choice for wedge-monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.

The NuQ102-AN-WH Loudspeaker features a 10" low-frequency driver with a low-mass voice coil for improved transient response and an aluminum dome with 1" neodymium high-frequency compression driver, which is mounted on a rotatable 100 x 60° (horizontal x vertical) dispersion-converging elliptical waveguide. Output power for the NuQ102-AN-WH Loudspeaker is provided by means of an efficient and lightweight KLARK TEKNIK 600W Class-D power amplifier. An easy-to-use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive full-range response at low-volume levels and transparent limiting for clarity at high-output levels as well as for long-term reliability.

On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provide intuitive access to position compensation, user EQ control, subwoofer integration, and signal-routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the NuQ102-AN-WH Loudspeaker via a Windows computer, as well as DSP firmware updates.

ULTRANET connectivity is provided by two locking etherCON connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single Cat5 cable between compatible digital devices including mixers, input/output stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.

Finished in a highly durable semi-matte white paint, the trapezoidal cabinet is constructed from 12mm birch plywood, and includes a rugged powder-coated perforated-steel mesh grille. Multiple threaded rigging points are provided for suspension in any orientation. The NuQ102-AN-WH Loudspeaker also features a 35mm socket for standard pole mounting plus integrated handles for convenient transport. Mains-power input is provided via a Neutrik powerCON connector.

System
Frequency Response	55 Hz to 18 kHz (±3 dB) 50 Hz to 20 kHz (-10 dB)
Nominal Dispersion	100 x 60° (horizontal x vertical) @ -6 dB points, rotatable
Maximum SPL	122 dB peak
Crossover Type	Active
Transducer	1 x 10" (261.5 mm) LF driver 1 x 1" (25.4 mm) HF compression driver
Limiter	Independent HF, LF, peak and rms
Amplifier
Maximum Output Power	600 W
Type	Class-D
Protection	Short circuit, thermal
Connectors
Input/Output	1 x Combo Jack / XLR 1 x XLR
Sensitivity	+4 dBu or +14 dBu software switchable
Input Impedance	40 kOhms balanced
Maximum Input Level	+22 dBu
Connectivity (RJ-45)	2 x RJ45
Mains Supply	Neutrik powerCON 20 A†
DSP
DSP	Rotary push-encoder and level control Buttons for Process, Setup, Exit, Enter
Display	LCD 128 x 32, blue, backlit
Delay	0 to 300 ms
Equalization	High- and low-shelving EQ 2 x parametric EQ Presets: Positioning, Sound mode, FBQ
Limiter	Zero-attack input limiter
Presets	20 total presets, 19 user-definable
Crossover	High-Pass L-R 24 dB/oct
Protection	Lock-out function for all settings
Connectivity
Processing	24-bit, 44.1/48 kHz sample rate (digital)
Converter Type	24-bit, delta-sigma
System	Signal 16 channels Latency < 0.9 ms Frequency response 20 Hz to 20 kHz (+0 / -3 dB) Dynamic range typical 92 dB
Cabling	Shielded Cat5 Maximum 246' (75 m) (recommended)
Power Supply
Power Consumption	80 W @ 1⁄8 maximum power
Voltage	120 V, 60 Hz (T 6.3 A H 250 V)
Construction	0.5" (12 mm) birch plywood
Grille	Powder-coated perforated steel
Dimensions	20.7 x 12.5 x 11.1" (52.5 x 31.8 x 28.1 cm)
Weight	30.2 lb (13.7 kg)
Packaging Info
Package Weight	37.5 lb

2-way full-range powered loudspeaker for portable PA applications

600W power featuring KLARK TEKNIK Class-D technology for total system control

ULTRANET digital-audio networking connects to mixers and other sources

10" low-frequency driver with low-mass voice coil for improved transient response

Aluminum dome with 1" neodymium motor compression driver

Rotatable converging-elliptical waveguide provides 100 x 60° (horizontal x vertical) dispersion

Fully featured user interface with LCD display for ease of navigation

PC remote-control software downloadable

12mm birch-plywood enclosure with hard-wearing semi-matte white paint finish

Rugged powder-coated perforated-steel mesh grille

Integral 35mm pole mount and handles

Multiple internal rigging points allow bracket mount and suspension in any orientation

Mains input on Neutrik powerCON connector

Related Questions and Answers

Q: 1. Hi there any advantage in in the cradle type vs side mount Wimberley Gimbal?

A: The main advantage of this type of gimbal is its portability.

Q: 2. Can the scanner scan both sides of the paper at same time ?

A: Yes, the Epson RapidReceipt RR-600W Wireless Receipt Scanner supports single pass duplex scanning.

Q: 3. can scan and save direct to usb memeory stick?

A: Yes, Epson RapidReceipt RR-600W wireless receipt scanner will save to usb drives.

Q: 4. Is the video signal compressed?

A: Yes, the signal is compressed.

Q: 5. what voltage outputs are the 3 charging usb ports running at, 5 volts?

A: Each of the three charging ports outputs 2.4 A (amps/amperes) which is more crucial to charging than voltage. The hub itself takes a 12 V AC adapter.

Q: 6. Can this record from a source in from an amp? Also, can you just play a CD.

A: The input source connection to the Tascam SS-CDR250N Two-Channel Networking CD and Media Recorder could accept a non-powered signal from an amplifier's signal output. The SS-CDR250N is capable of playing back commercial audio and data CDs in a variety of formats.

Q: 7. is this compatible with the Blackmagic Video Assist 12G?

A: The SmallRig L-Series / NP-F970 USB-C Rechargeable Camera Battery is compatible with the 5" and 7" 12G-SDI Blackmagic Design Video Assist Monitor/Recorders.

Q: 8. Are these compatible with the Nanlite Forza 60C RGB LED Monolight?

A: Yes, the SmallRig L-Series / NP-F970 USB-C Rechargeable Camera Battery will work with the Nanlite Forza 60C RGB LED Monolight B&H # NAFORZA60C.

Q: 9. Is the ball head removeable?

A: Unfortunately, the head included in the Smallrig simorr Vigor VT-10 Vlog Tripod (White) is not removeable.

Q: 10. I wish to use the 200-s for my Canon 7d with a canon 70-300L lens. Is this compatable? What adapter plate is required for the type C tripod ring?

A: It is compatible. You will need a plate like this one https://bhpho.to/2XeyJAe for the collar https://bhpho.to/2NiVOgQ.

There are no reviews for this product.