The gray AP-30T 30W Horn Loudspeaker with 25V/70.7V/100V Transformer from Atlas Sound is a double re-entrant loudspeaker which delivers 30W of continuous power handling, intelligibility, and remarkable efficiency. This loudspeaker operates within a nominal frequency response range of 300 Hz to 12 kHz, and offers a sensitivity of 108 dB at rated power to provide clear voice and signal communication.

The AP-30T Horn Loudspeaker features an integral transformer to meet a variety of distributed system needs. The AP-30T is equipped with a versatile, 3-way, 25, 70.7, and 100V line transformer. Transformers are adjustable using Atlas Sound’s exclusive Vari-Tap Connect Center which features a 7-position, watts/impedance selection switch. The labor saving Vari-Tap terminal is screwdriver adjustable and includes a protective cover with built-in strain relief.

The AP-30T Loudspeaker provides high-intelligibility voice and signal transmission for high-power indoor and outdoor public address, intercom, security, alarm, or industrial signal systems. The unit incorporates high-efficiency compression drivers to project through high ambient sound levels, over long distances and in wide-open areas with fewer loudspeakers. It is designed for applications such as commercial buildings, distribution centers, industrial warehouses, institutions, civic centers, and recreational facilities.

The included Omni-Purpose mounting bracket achieves precise positioning in the vertical and horizontal planes with a single adjustment and includes provisions for loudspeaker installation on conventional surfaces as well as for strap mounting on I-beams or pillars. The Loudspeaker is weather-resistant with metallic construction and matching ABS plastic with metal components finished in gray epoxy.

For Voice and Tone Signaling    Wide Frequency Response    Suitable for Outdoor and Indoor Use    25, 70.7, or 100V Line Applications    Omni-Purpose Bracket for Positioning

Environment resistant for outdoor and indoor use

Equipped with a transformer for versatile 25, 70.7, or 100V line applications

High-efficiency driver with proven performance reliability

25, 70.7, or 100V line applications

Omni-Purpose racket for precise positioning

Wide frequency response for optimum sound quality

Superior intelligibility for voice and tone signaling

Gray finish

Related Questions and Answers

Q: 1. Will this work with a small video camera (i.e. sony ax-100)?

A: yes, no problem

Q: 2. Can this also be plugged in to wall for standard AC power?

A: Yes.

Q: 3. does the hdmi out still have audio or is it muted ?

A: I believe the answer is yes. I will tell you our scenario. The out to the extractor runs the video and audio to our projector. We are able to hear audio through our projector as well as the main sound system that the sound is extracted to. in essence, we have the option of listening to sound through the projector only or through the sound system only or both. Hope this information helps.

Q: 4. Can I change the direction of the screw?

A: We believe you are asking if you can remove the screw knob and then reinsert under the handle so the screw goes down into the object you wish to attach. While we are unable to test this configuration, we do not see it not working as you wish.

Q: 5. Full gear kit is just the bracket? Is the shoulder mount with rodsnot included?

A: Included in the box is: Cinema Camera Transformer Rig, 3 x Shoe Mount, Transformer Rig Height Extender (Set of 2), Ball Mount, Transformer Bracket Handle and Limited 5-Year Warranty. The 15mm LWS, follow focus and matte box shown in two of the pictures are not included.

Q: 6. Can i mount this cage in any shoulder? I usually use a sevenork.

A: a sevenork stabilizer? I think you can. I use it with a stabilizer but I had to add some brackets. It's also has some weight. The cage has handy grips and it is sufficient to shoot just with the rig especially if you are using a DSLR

Q: 7. I have read the two reviews of this item. It appears they the threading is of a very close tolerance. As far as I'm concerned that is a good attribute. My question concerns the locking mechanism itself; i.e., part A tolerance to part B. If you have already bought this and have had it in service for some while, I'm asking if the joint is solid and without any free play of tolerance. Yes, I have an Atlas MS20C. It would be much nicer to have a quick connect between the shaft and base because as we all know, it is typical to separate the two pieces during transport. Also, I'm know from experience that hasty and often assembly / disassembly of the base from the shaft invites the risk of stripping threads. On paper, this device looks very useful and I would definitely buy it if I only knew that it has a very solid fit between the halves with no wobble at all. Thank you very much.

A: Atlas as you well know makes excellent products. I cannot guarantee the QR-2 will not have some play to it. As the connection is not a thread its ball bearing.

Q: 8. Work with my H2?

A: Yes, the Pilotfly Dual-Hand Transformer Professional Kit for Select Gimbals, is intended "For Pilotfly Adventurer & H2 Gimbals".

Q: 9. Can I by it in the store Orr online?

A: It is available for purchase online and in store. For up to date store stock please email AskBH@a href= http://BHphoto.com target= _blank BHphoto.com/a

Q: 10. What voltages does is the DC power input of this unit accept?

A: This unit comes with an AC adapter but does not specify the DC voltage.