Power Distribution for Multiple TSDs from a single PSU

1 in 8 Out Configuration

Four Fixed 24 VDC Outputs

Two Variable 5V - 24 VDC Outputs

Two USB 5 VDC Charge Ports

Current Operating Range 1A to 3A

DC Filtering Per Channel

DC Isolation Per Channel

Cable Management System

Multiple Mounting Configurations

Separate Ground Connections

Removable Phoenix Style I/O Connectors

Related Questions and Answers

Q: 1. Does Blackmagic make a 12G version of this?

A: There is the Blackmagic Design Teranex Mini SDI 12G Distribution. https://www.bhphotovideo.com/c/product/1186267-REG/blackmagic_design_convntrm_ea_da_teranex_mini_quad_sdi.html

Q: 2. Will this pass 8 channels of audio, if that is what is going into the input?

A: Yes. It will pass up to 16 channels of SDI audio.

Q: 3. Does this unit work with the G4 series transmitters as well?

A: I verified with the manufacture and yes it does work with the Sennheiser G4 transmitter series

Q: 4. Is this power adapter the correct one for my Marshall distortion foot pedal?

A: What model pedal do you have? This will power a pedal needing 9V DC and less than 500 mA of input power with a negative tip/center positive polarity. This will work with a lot of different pedals, but not all. You'll want to check the specs to be sure. For further assistance please contact us at sales@bhphoto.com or call us at 1-800-606-6969.

Q: 5. Will this also work with the Strobies 360 Flash Unit? The Bolt and Strobies units appear to be identical.

A: I have one Genesis 400 (Calumet brand), a Godox AD360ll, and Flashpoint Streaklight 360ll- and all are the same ports, same plugs and the doubler cables are interchangeable with all 3.

Q: 6. Can this distribute to 3 differant resolutions or 3 differant tvs from one signal out of an imac?

A: This converter takes one SDI signal and outputs 8 identical SDI signals. All the same resolution and frame rate as the input.

Q: 7. Can I send Program signal (including tally) back to 6 different studio 6k pro cameras?

A: Yes, you can use the Blackmagic Design Mini Converter SDI Distribution 4K to send Tally signal to the Blackmagic Design Studio cameras.

Q: 8. When you install the DC2 how do you get the original battery door off to put on the new one with the cable hole?

A: There is a small pin on the bottom of the unit that when it is pushed in the door comes right off.

Q: 9. Does this work for the receiver component too?

A: How can i eliminate the buzz noise ? A lot of forum talk about it but no answer...

Q: 10. does it work with sennehsier G2/G3/G4 ew 100? and i need more info about powering can i connect it to a 12V battery?

A: The Sennheiser DC 2 - DC Camera Power Converter works with the G2, G3, and G4 100 series. It is not intended for use with a battery.