The Atlas Sound TSD-SEQ6 is an AC power sequencer controller than can be used in tandem with a compatible ECM series power distributor for sequenced power-up, and power-down of professional equipment in a wide range of scenarios such as restaurants, churches, schools, music venues, and other applications.

The TSD-SEQ6 features 6 outputs that are configurable individually to be either a 24VDC output or Hard Switch Contact Closure (CC). There are two separate output sequence time delay trimmers ranging from 1 second to 6 minutes. Activation can be done via the front panel or remotely via Hard Switch CC, Momentary Switch or DC Voltage. The TSD-SEQ6 also incorporates an Emergency Power Down (EPD) port for local fire codes. You can link two TSD-SEQ6 units together giving you 12 sequenced outputs.

The TSD-SEQ6 is part of a full line of Atlas Sound Time Saving Devices. These compact (1.5" x 4" x 2.75") units are designed to solve some of the common audio system problems in the easiest, most efficient, and cost-effective way. All models are made from high quality components and include removable individual I/O connectors for quick and precise wiring, separate ground terminals for all I/Os assuring secured connections, and removable level controls that can be replaced with tamper-resistant security covers. The TSDs are highly efficient and meet most energy standards as one 24V DC power supply (available separately) can power multiple Atlas Time Saving Devices.

6 Adjustable sequenced outputs

Assignable 24VDC or hard switch contact closure (CC) per output

Remote Activation via 5 - 24VDC, momentary contacts, hard switch contacts

Status indicator for each output

Emergency power down "EPD" port

Link out for two TSD-SEQ6 controllers

Voltage output for remote LED status display

Separate wiring port for each input/output

Cable management system

Multiple mounting configurations

Removable Phoenix style input/output connectors

Related Questions and Answers

Q: 1. can I charge Titon Batteries with this charger?

A: Yes, the Anton/Bauer Titon batteries, like the Anton/Bauer Titon 90 Gold Mount Lithium-Ion Battery, will recharge on the Anton/Bauer Tandem-70 On-Camera AC Power/Charger.

Q: 2. Will this work on the Canon C70?

A: Yes, the Canon CA-CP200L Compact AC Power Adapter is compatible with the Canon EOS C70 Cinema Camera (RF Mount).

Q: 3. Is there any difference between this and the CA-CP200B?

A: Yes, this is specifically designed to work with the Canon XF705.

Q: 4. Will this work with a Canon VIXIA HF G30 Camcorder?

A: It will not, this is for smaller Vixia options. For the G30 you will need B&H # CACA570 instead. This power supply works with your camera. https://bhpho.to/2jkeNoi

Q: 5. Does this work with the C300 mkIII?

A: No, the C300 III has a 4-pin Lemo connector.

Q: 6. compatible with cannon rebel?

A: I use my 110 power adapter with my Vexia mini and it works well. I never had a problem with the unit but I only use it several times a year. I would recommend the unit. I don't own a Rebel so I can not comment on its comparability with that Camera.

Q: 7. Will this power a Shinobi 7?

A: Yes, the Atomos Locking AC Power Adapter for Flame Series Monitor will power the Atomos Shinobi 7.

Q: 8. will this work with the Canon vixia HF640?

A: No, this will not work with the Canon Vixia HF G40. The correct power adapter for the HF G40 is the CA-570 available at this link https://bhpho.to/2ZyPR3c.

Q: 9. Can this CA-110 charger power the Vixia camera HF R700 without the battery installed?

A: Yes - this will power the camera directly from an AC wall socket.

Q: 10. Is the cord compatible with the Canon Vixia HF R500?

A: Yes the Power Cord is compatible with the HF R500 series camcorder