The 24879 Tensioned Conference Electrol by Da-Lite is a ceiling-recessed screen designed to keep a room with clean lines. Its 69 x 110" viewing area has a 16:10 aspect ratio and 130" diagonal. 10.5" of black drop at the top allows for extra space to deploy your screen, handy for high-ceiling installations. Provided trim on the screen conceals the rough opening cut in the ceiling to install the screen.

HD Progressive 1.3 is designed for applications where projector brightness and screen size require an increase in gain. It has a gain of 1.3 and a 75° half angle. It offers accurate color reproduction and can handle some ambient light. The surface can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. This seamless surface is also GREENGUARD GOLD certified.

130" Diagonal / 16:10 Aspect Ratio    Integrated Camera Shelf    HD Progressive 1.3 Surface    1.3 Gain, 150° Viewing Angle    10.5" Top Black Drop    Black Backing    Tensioning Cable System    White Case    Includes Low Voltage Control    Includes Three-Position Control Switch

Integrated video conferencing camera shelf (camera sold separately)

Slim-Tab, a lower profile, and stronger tab design to keep your screen taut

Smooth Roll Technology to keep your screen flat

Tensioning Cable System to prevent warping and ensure even lateral tension

White powder-coated case for a clean aesthetic

Standard black backing retains projected brightness on front projection surfaces

Low Voltage Control allows the screen to be controlled via a low voltage signal or momentary dry contact from a third-party control system. The LVC is necessary if you want to use an IR or RF remote to control your screen

Related Questions and Answers

Q: 1. Does this sit by itself on my V600 or do I put it inside of my 120 mask?

A: You insert this inside your mask.

Q: 2. Will this work with the Epson Perfection V300 Photo? Does this mask fit into the holder that comes with the V300?

A: Before purchasing, I read other's feedback and one person mentioned that this fit into their epson film holder. But it was a different model than mine. I have the V750 Pro Epson scanner and it was supplied with about 5 or 6 different film holders including one called a film area guide. This is a mylar mask that sits on the scanner bed, and I snug the 110 film mask to one side to scan. I set up a custom setting and work with that. The results are satisfactory for working with 110 film. Those 110 cameras and lenses were not exactly high end. Most important thing is to clean the dust off the film.

Q: 3. Will the watson pro 12 2A Power Supply (2.1mm) power these lights?

A: Yes

Q: 4. After reading the reviews, there seems to be a warping issue. Has that been corrected?

A: We have not had any recent issues with warping with the Lomography DigitaLIZA 110 Film Scanning Mask.

Q: 5. can use with blackmagic ursa broadcast g2?

A: Yes, The Fujinon 7.6-130mm f1.8-2.3 ENG 2/3" Lens would be supported on the B4 mount of the Blackmagic URSA Broadcast G2.

Q: 6. does this lens have encoding capabilities for Virtual sets? and tracking data?

A: There is no listing of such capabilities for this lens. It is a 2/3 sensor lens meant for the TV broadcast industry so such a need with this lens is most unlikely.Pro level cine lenses such as Zeiss and Cooke would be the ones with metadata capabilities that would allow encoding and tracking.

Q: 7. Hi, is this product the eMeet Meeting Capsule (Gen.2) product?

A: The eMeet Meeting Capsule 360° Video Conference Camera, B&H # EMG1, is a Gen 2 product.

Q: 8. Is there an adoptor for this lens to use on the Sony FS5?

A: FotodioX does offer a B4 to Sony E Mount Adapter.https://bhpho.to/2GAZEJP

Q: 9. Can you get 4K with this lens with the BM Broadcast G2?

A: Although the Fujinon ZA17x7.6BERM 17x 2/3" HDTV Lens captures in less resolution than 4K, it is possible to use the lens with the Blackmagic Design URSA Broadcast G2 Camera and capture 4K resolution.

Q: 10. How would you connect the LED light with a Wescott Softbox?

A: The Dracast LED panels included in the Video Conference 3-Light Starter Kit are not compatible with the Westcott softbox products.