The Anton/Bauer Performance Series Quad Charger Gold Mount allocates the most power to the highest-charged battery first and subsequently to the next most charged ones, ensuring that you'll have a fully charged battery as soon as possible. The process is similar to a champagne glass pyramid where the top-most glass overflows into those below it. The Performance Series is 40% more efficient than previous Anton/Bauer chargers by employing faster processing, using a smaller transformer in the power supply, and drawing less amps.

This Gold Mount version supports the concurrently released Digital Battery Series Gold Mount batteries and all previous Anton/Bauer models, and it's capable of simultaneous, multi-chemistry charging. Common to the Anton/Bauer name, a feature called InterActivity allows the charger to communicate with an Anton/Bauer battery and assign the best charge routine possible based on the battery's cell chemistry and the best termination algorithm possible (TCO, -ΔV temperature compensated VCO, dT/dt, CCO, FUL, or I-min), ensuring better overall life. A 4-pin XLR output allows you to power your camera right out of the charger via an XLR cable or converter cable. This can be done off of wall power at the same time as charging your batteries or off of attached batteries if the charger is unplugged. The batteries in the latter case are hot swappable so you can power your camera with uninterrupted power.

The charger features a simple-to-use, touchscreen display that provides activity and status updates and access to management functions. It also supports an optional Wi-Fi software feature that will allow you to remotely manage the health and status of one or more Performance Series chargers.

Allocates to Most-Charged Battery First    40% Increased Efficiency    Simultaneous, Multi-Chemistry Charging    4-Pin XLR Output for Powering Cameras    Assigns Best Charge/Termination Possible    Touchscreen Activity/Management Display    Supports Optional Wi-Fi Control Software    Ergonomic Design; One-Hand Carry Handle

• Allocates the most power to the highest-charged battery
• Supports simultaneous, multi-chemistry charging
• 4-pin XLR output for powering your camera off of wall power or battery power
• Assigns the best charge routine possible based on the battery's cell chemistry
• Assigns the best termination algorithm possible
• Simple-to-use touchscreen activity, status, and management display
• Ergonomic design with one-hand carry handle
• Supports optional remote health and status management software feature

Related Questions and Answers

Q: 1. How long will this battey power a sony fs7 m2k?

A: Depending upon level of operation (i.e. how much zooming, other adjustments, and format of recording), you should be able to count on 3 solid hours, if not a little more.

Q: 2. I'm trying to keep my JVC GY-LS300 going. Will this plate work with my camera?

A: The Anton/Bauer Gold Mount for JVC Camcorders will not work for powering the JVC GY-LS300. This adapter is for larger JVC shoulder mounted ENG cameras.

Q: 3. Have just purchased Anton-Bauer QBH-HD. Need cable (2 male to 3 pin female, with pin 3 neutral) to power Kino Celeb. Is such a thing available?

A: I am sorry, but we do not have a cable like that. The QBH-HD does also have a 4-Pin XLR output for 14v power. So you may be able to use a 4-Pin Male XLR to 3-Pin Female XLR Adapter with a XLR 3-Pin Male to 3-Pin Female cable.

Q: 4. does work with Sony pmW 320?

A: Yes, I just purchased two for our new SONY PMW320K cameras and they went on effortlessly. No modification necessary and all screws were supplied.

Q: 5. Can this setup also work on the Sony FX9?

A: No, the Gold Mount plate won't fit on your FX9 properly. You have to use a Gold Mount plate designed for the FX9, not the FS7. Anton/Bauer makes a "Battery Slide Pro Gold Mount for Sony FX9" (BH #ANSFX9GMBSP).

Q: 6. Would this work with a C70?

A: Anton Bauer lists the compatibility for the Canon C100, C100mkII, C300, or C500 camera.

Q: 7. Will this battery work with the older Anton Bauer InterActive 2000 charger?

A: According to Anton Bauer, the Anton Bauer InterActive 2000 (also known as The Q-2702) will work with the Anton Bauer Titon 90 Gold Mount Lithium-Ion Battery, with Firmware: 5.9. Please see Anton Bauer's chart for more details: https://www.antonbauer.com/media/14843/gold-mount_compatibility-matrix_web.pdf

Q: 8. Can 2 14.4V batteries power the Gemini 1x1 at 100% with this adapter? (while using batteries made by another brand than Anton?)

A: If using (2) Gold Mount batteries that are 200 Wh or higher in total power, it can run the Gemini 1 x 1 at 100 %. The actual run time depends on the watt-hour rating of the batteries.

Q: 9. Will 4 of the new larger sized 'Anton Bauer - Digital 190' mount nicely on this holder?

A: We are currently recommending this charger as compatible with the new shape Anton Bauer batteries.

Q: 10. Does it have any advantages when compared to the Titon SL? Are the cells more stable, longer life, or more protections?

A: The Anton/Bauer Titon SL 90 95Wh 14.4V Battery (Gold Mount) is a slim version of the Anton/Bauer Titon 90 Gold Mount Lithium-Ion Battery. The non-SL version offers a larger screen and wider weight dispersion for better balance on more front heavy cameras.