Advanced Combat Optical Gunsight, the 4x32 ACOG Dual-Illuminated Riflescope from Trijicon, combines a waterproof and shock-resistant construction with a battery-free dual-illuminated Green Horseshoe reticle. The reticle employs tritium phosphor for illumination at night and fiber optic illumination for daytime. The sight's rugged optical system features zero distortion, multiple anti-reflection coatings, and a 32mm objective aperture. To compensate for wind and ballistic bullet drop, the scope offers windage and elevation adjustments with 1/2 MOA impact point correction.

The housing offers supreme ruggedness and durability: it withstands heavy recoil and deep-water submersion to 328'. To achieve this benchmark, the body is forged from a single piece of 7075-T6 aluminum alloy and coated with Type III hard anodizing finish. It also features an angled sunshade and mounts on a Picatinny style rail via the included TA51 Flattop Mount.

 Green Horseshoe/Dot Reticle    Dual-Illuminated: Tritium & Fiber Optic    32mm Objective Lens Diameter    Multicoated Zero-Distortion Optics    Windage and Elevation, 1/2 MOA IPC    7075-T6 Aluminum, Type III Hard Anodized    Waterproof/Submersible to 328'    Recoil-Resistant, Fogproof    Made in the USA

• Multicoated optics
• 4x magnification for a short-to-medium range
• 32mm Objective lens diameter
• Angular field of view range is 7°
• Eye relief: 1.5"
  •  Green Horseshoe/Dot reticle
  • Tritium phosphor lamp for night illumination
  • Fiber optic illumination for daylight
  • BDC out to 800 m
    • Windage and elevation adjustments
    • 1/2 MOA impact point adjustments
      • Angled sunshade
      • Single piece 7075-T6 aluminum alloy housing
      • Type III hard anodizing black matte finish
      • TA51 Flattop Mount is compatible with Picatinny rails
      • Waterproof submersible to 328'
      • Shock-resistant

        Related Questions and Answers

        Q: 1. How can I get replacement rods for the 6 x 7 hiliter? My handyman threw them out. I tried dowels and they snapped.

        A: The following rods can easily be replaced by contact Manfrotto parts department https://bit.ly/3LHGVOf

        Q: 2. Will this product adapt Canon EF lenses to my Sony FS700? Is the control ring smooth, or does it stop up and down?

        A: Yes, the Dot Line Tilting Lens Mount Adapter for Canon EF Mount Lens to Sony NEX camera will adapt Canon EF lenses to a Sony FS700. The control ring will transition smoothly.

        Q: 3. How is it illuminated

        A: You would place a light source into the slots on both sides which then illuminates the background.

        Q: 4. What is the depth of the 6x7 box when assembled?

        A: The depth of the Manfrotto HiLite Illuminated White Background (6 x 7') is 19.29 inches.

        Q: 5. What type of holder (if any) do you use for shooting?

        A: The backdrop can stand on it's own, or you can strap it to a tradional background stand (2 stands and crossbar).

        Q: 6. I have been shooting green screen and have seen people use this as an alternative to be able to use quick extractions. What method/software would you recommend if switching backgrounds from green to lit background?

        A: I use the Magic Eraser Tool in Photoshop; one click anywhere on the background and it's gone!I would image that any software that will eliminate green can be used to do the same with pure white there must be a setting somewhere.

        Q: 7. Any suggestions on how many stops should I meter the Lastolite hilite relative to the main? YouTube suggest 2 stops more but it is not working for me.

        A: It really depends on the distance between your subject and the background. I often do 2 stops when subject is 7 to 10 feet in front or more, but if my subject is closer, I will try to lower the wrap around effect by lowering the light to 1 stop more than the key, or less. I know some people are not even trying to get pure white because of this and will settle with a very light grey, then make it white is post production.

        Q: 8. I bought one of these softbox/illuminated backgrounds a few years ago. Absolutely amazing but as one of the other reviewers mentioned, after a few short month the white translucent front starts to turn a yellowish/red and become a pain for post edit. Is there anything I can clean the front translucent front material with to get it back to white??

        A: these yellow from heat. molecular change. it doesn't wash off.

        Q: 9. Will this adapter fit on a Sony AR2 full frame camera?

        A: Yes this fits any Sony E-mount camera, including the a7R II.

        Q: 10. What is minimum Watt Seconds (one strobe/mono light) required to fill the unit with light? I.e., 100ws, 150ws, etc.?

        A: Hello, I think minimum Watt Seconds is 300ws.