You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Black Box Acs2001a-r3 Multimedia (dvi-d/edid) Over Catx Single-access Extender Kit

Black Box Acs2001a-r3 Multimedia (dvi-d/edid) Over Catx Single-access Extender Kit
  • Product Code: ga175879
  • Availability: In Stock

$764.85 $1,017.25

The ACS2001A-R3 Multimedia (DVI-D/EDID) over CATx Single-Access Extender Kit by Black Box, comprised of a local transmitter unit and a remote receiver unit, allows you to broadcast DVI-D computer video with EDID up to 164' from the host computer over a CATx cable (CAT5 or higher). The video resolution goes up to 1280 x 1024 at 164' and 1920 x 1200 at 98.4'. DDC emulation is supported. The local unit features an "EDID copy" button for reading and remembering your monitor's EDID. Internal power protection ensures a continuous and steady video signal. The DVI-D output of your PC is connected to the local unit and your DVI-D display to the remote unit. The two units are interconnected with the CATx link cable, and each of them is powered by its own external power supply.

Parameters
Resolution1920 x 1200, 60 Hz at 98.4' (30 m)
1280 x 1024, 60 Hz at 164' (50 m)
Transmission Range164' (50 m) maximum
ConnectorsLocal Unit:
1 x RJ-45, interconnect
1 x DVI female, video input
1 x 5 VDC barrel power plug
Remote Unit:
1 x RJ-45, interconnect
1 x DVI female, video output
1 x 5 VDC barrel power plug
IndicatorsLocal Unit:
1 x LED, power
Remote Unit:
1 x LED, power
External Power SupplyLocal Unit:
5 VDC, 1 A
Remote Unit:
5 VDC, 1 A
DimensionsLocal Unit: 1.5 x 2 x 2.6" (3.8 x 5.2 x 6.7 cm)
Remote Unit: 1.5 x 2 x 2.6" (3.8 x 5.2 x 6.7 cm)
WeightLocal Unit: 0.3 lb (0.1 kg)
Remote Unit: 0.3 lb (0.1 kg)
Packaging Info
Package Weight1.6 lb
Box Dimensions (LxWxH)9.7 x 6.1 x 2.8"

Extends DVI-D up to 164' over a CATx cable (CAT5 or higher)

Capable of 1280 x 1024 at 164' and 1920 x 1200 at 98.4'

Local unit reads and remembers monitor's EDID

Supports DDC emulation

Internal power protection

Related Questions and Answers

Q: 1. Will this work on my, Olympus Fisheye Tough Lens Pack ?

A: Yes, it is large enough. The case can approximately support a lens that is 2.6-3 inches by 1-2 inches.And the lens is about 2.56 inches x 1.42 inches.

Q: 2. Will the canon 18 - 135 and the 24 - 105 fit into this pouch? Thank you.

A: Yes this pouch can fit both of those Canon lenses.

Q: 3. Do the speakers require electric power?

A: Yes, the Logitech Multimedia Speakers Z150 (Midnight Black) are powered via an included power supply.

Q: 4. Will this case fit a canon 24-70 ?

A: It would be a little tight due to the hood and too long. This other Ruggard case would be a better fit for the Canon 24-70 f2.8 lens: B&H # RULCY14X4 MFR # LCY-14X4 https://bhpho.to/3ddvPlG

Q: 5. Does it come with the chord to plug into the headphone jack? Like can I hook up my phone to this?

A: Hello, The speakers come with everything right out of the box for you to start listening whether you plug them in to your computer, laptop or phone. They can be used with any audio device that has a 3.5mm headphone jack. Hope this answered your question... Thanks

Q: 6. What are the dimensions?

A: Exterior Dimensions: ø: 3.0 x H: 1.5" / ø: 7.6 x H: 3.8 cm Interior Dimensions: 2.6 x H: 1.0" / ø: 6.6 x H: 2.5 cm

Q: 7. What are the interior dimensions of the Ruggard 2.5 X 3" pouch?

A: Ruggard Fold-Over Neoprene Lens Pouch (2.5 x 3", Black) interior dimensions are ø: 2.0 x H: 1.8" but expanded they are ø: 2.5 x H: 3.2".

Q: 8. Is this Arca baseplate compatible with the DJI RS2?

A: This will not work with a gimbal because the curved portion will not allow you to orient the camera in the direction it needs to be in. You will want a flat arca plate that is not dedicated to a camera where it has the curved section.

Q: 9. What do the dimensions mean — diameter X length or vice versa?

A: The given measurements in the description are the diameter and the height.

Q: 10. Can I put 4 LED light bulbs (25W or under) onto this instead of the Fluorescent ones?

A: As long as the ballast on the bottom of the LED lights you purchase fit without bumping into each other, yes, you may use LED bulbs in place of fluorescent bulbs in the Photek Brella Box Octagon Kit. (Some LED bulbs are wider than others, so the bulbs fitting may be a concern).

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Godox Fls5 Fresnel Lens

$237.00 $312.84

Gossen Mavolux 5032 C Kit

$3,327.60 $4,791.74

Motocrane Psc Solo Coupler

$885.00 $1,283.25

Products You May Like

Matthews Gobo Plate Xl

$108.00 $149.04

Heliopan 36mm Rg 665 Infrared Filter

$218.85 $286.69

Apc Surtd6000rmxlp3u Smart-ups Rt Battery Backup

$23,025.00 $36,840.00

Tiffen 138mm Ultra Contrast 5 Filter

$967.50 $1,315.80