The ACS4001A-R2-R ServSwitch KVM (DVI/USB) over CATx Extender Remote Unit by Black Box is a standalone unit designed to receive KVM signals from a ACS4001A-R2-T local transmitter unit (sold separately) located at a distance of up to 400', over a CATx cable (CAT5 or higher) at a maximum resolution of 1920 x 1200. The unit provides outputs for connecting a DVI-D monitor, a USB keyboard, and a USB mouse. For dual-access configuration of the transmitter-receiver pair, connect a DVI-D monitor to the local output of the ACS4001A-R2-T local unit, and a USB keyboard & a USB mouse directly to the CPU; use your computer at either location. This receiver is especially versatile when used in conjunction with ServSwitch DKM DVI-D KVM switches.

Receives KVM signals from a ACS4001A-R2-T local unit (sold separately) located up to 400' away

Connect a DVI-D monitor, a USB keyboard, and a USB mouse to the remote unit

Maximum resolution up to 1920 x 1200

The transmitter-receiver pair can be configured as a dual-access extender

Use in conjunction with ServSwitch DKM DVI-D KVM switches for added versatility

Related Questions and Answers

Q: 1. Will this fit the new Sony RX100VI?

A: I just purchased the RX100VI to replace my RX100II. Surprisingly enough, the lens diameter on the VI is smaller than the RX100II. If anything, there may even be a little bit of space between but I'll find out. The camera definitely needs the rubber grip - it is incredibly slick and with the little bit of added weight it's unwieldy without it. I'm going to order it tonight and see how well it works and I'll report back.

Q: 2. Can the above Chrosziel 450-R2 Matte Box and Follow Focus Kit be used for the Canon c300?

A: This Chrosziel kit is made for the Blackmagic 2.5 and 4k Cinema Cameras, it will not work with the C300. However Chrosziel does have some kits with a matte box for the C300 and you could add a variety of different follow focus systems to that rig.

Q: 3. Will this fit the RX100 V?

A: Yes, the AG-R2 camera grip will fit the RX100 V.

Q: 4. would a M lens 18-150 with its hood (stores backwards on the lens)?

A: Yes.

Q: 5. It was necessary to remove this grip due to a return of my RX100 M5 due to a defect. I will be receiving a replacement RX100 M5. Does anyone know what type adhesive tape I can use when I refit my current grip on the replacement camera?

A: I would say the best product to use would be 3M branded double sided sticky pads or tape

Q: 6. Will it fit the RX100 VII ?

A: Yes this will fit RX VII

Q: 7. Can I install a quick set short shelf on it at the same time?

A: You should be able to use them both at the same time.

Q: 8. does it works for the URSA mini? thanks

A: Generally, there is a lag time from when a new camera is released and when 3rd party manufacturers can release corresponding products that match. At this time, Chroszeil has not listed a kit specifically for the Blackmagic Mini. So while I would say that the Chrosziel 450-R2 Matte Box and Follow Focus Kit for Blackmagic Cinema Camera & Production Camera 4K probably will work for the Mini, I cannot say that it will work without issue. My concern is will the base be the right height since the matte box is not height adjustable. We will not know for sure until Chroszeil has an opportunity to test the arrangement.

Q: 9. is this compatible with the Zeiss CP2 lenses?

A: This is compatible with all CP.2 lenses with the exception of the CP.2 50 mm/T2.1 Macro which has a front diameter of 134mm.

Q: 10. Can you attach the grip to the LCJRXFB Sony case? Will it interfere with the cover?

A: Yes, you can attach the grip to the case and it does not interfere with the cover. It's how I have my camera setup and works great.