The 16', aqua 50/125µm Fiber Optic Multimode Duplex SC to SC 10Gb OM3 Cable from Avenview is fully tested to ensure reliable performance in critical applications. This 50/125µm duplex multi-mode fiber optic cable features an SC connector with keyed duplexibility to support send/receive channels. This SC connector is easier to use than the twist-style ST connector in compact spaces. It has a 0.09" (2.50mm) ferrule and molded housing for protection. Typical matched SC connectors are rated for 1000 mating cycles and have an insertion loss of 0.25 dB. The SC connector has square snap-in connector latches with a simple push-pull motion and is keyed.

10Gb application support

The duplex cable is joined together in a zip-cord style for easy separation

Features a laser optimized 50 µm core and 125 µm cladding

Used with both LED and VCSEL laser light sources

Ceramic ferrules provide long-lasting reliability and precision alignment

Used to connect patch panels and/or network devices that require 50/125 multi-mode cabling

The OFNR jacket complies with stringent building codes

Related Questions and Answers

Q: 1. Has anyone else had any issues connecting your ronin sc on the dji Ronin app? The app keeps crashing whenever I select my device and I'm not sure what to do !

A: It would be best to see and work with phone models that are on the compatibility list. See this link and choose your phone type Android or iPhone. https://bit.ly/38rZbx2

Q: 2. I have a canon EOS 60d, it weighs 3.4 pounds and my lense is 106mm, will this hold my camera?

A: The Ronin SC gimbal's maximum payload is 4.4 pounds. We recommend staying under 80% for optimal performance. The Ronin SC2 gimbal has a payload of 6.6 pounds.

Q: 3. Will this work with a Canon M6 Mkii and Sigma 18-35/Sirui 35 Anamorphic?

A: the gimbals Load Capacity is 4.85 lb / 2.2 kg as long as the payload is within those limit it should work

Q: 4. Can the gimbal power the tilta nucleus nano motor?

A: We are not aware of a cable option. But you could possibly mount this USB battery to the SC and power the Nano Servo https://www.bhphotovideo.com/c/product/1547374-REG/tilta_wlc_t04_bp_18650_18650_battery_pack.html

Q: 5. I have a Sunway Arca-compatible L-bracket attached to a Sony a7riii. Will this work with this gimbal without removing the L-bracket?

A: Yes, as long as your setup's total weight is less than 4.4 pounds.

Q: 6. what other gimbals would work with a canon 80D with a tamron 24-70 f2.8 g2?

A: The Ronin-S will work with the 80D and a Tamron 24-70mm F/2.8 Lens. The Ronin-S is designed to work with larger DSLR cameras and has an 8 pound load capacity. The Ronin-SC is aimed at smaller mirrorless cameras and is not an appropriate choice for the 80D. https://bhpho.to/2FJgGoG

Q: 7. Does the ronin-sc works with canon g1x Mark III?

A: Yes, with the latest update to the firmware, the DJI Ronin-SC supports the Canon G1X Mark III, for balancing and for start/stop functions and triggering auto-focus. Due to the small weight of the camera, DJI recommends using auto tuning for the tilt axis. https://dl.djicdn.com/downloads/Ronin_SC/20200610/Ronin_SC_Camera_Compatibility_List_en.pdf

Q: 8. I want to by a spare Front Cap which should I get ?

A: The Voigtlander Nokton 40mm f/1.4 Lens has a 43mm front filter thread, so you could use pretty much any 43mm lens cap. You could look at the Sensei 43mm Clip-On Lens Cap (B&H # SELCC43). If you prefer a center pinch cap, Zeiss has their 43mm Front Lens Cap (B&H # ZEFLC43).

Q: 9. Is there any way to use the focus system in the gimbal with a Canon T7?

A: One can control the focus of the Canon T7 when mounted onto the DJI Ronin SC by using the DJI Ronin Focus Motor for RS 2 and RSC 2 BH #DJRFM • MFR #CP.RN.00000102.01 and DJI Ronin-S/SC Focus Wheel BH #DJCPRN000801 • MFR #CP.RN.00000008.01. Focus motor comes with a geared lens ring to wrap around the focus barrel of your lens and the motor will interface with the geared ring as well as communicate with the focus wheel mounted to your hand grip on the Ronin SC.

Q: 10. How can the quick release plate be mounted on a tripod when moving a camera quickly between the two?

A: You can put an Arca Clamp on top of the tripod as this uses an Arca style plate. https://bhpho.to/30RPVLg