The white 24856 Tensioned Advantage Deluxe Electrol Projection Screen from Da-Lite is designed to be concealed neatly in a ceiling when not in use, which makes it ideal for corporate conference rooms. The screen can be installed in two stages; the screen case can be installed during construction, and the screen assembly can be attached during the finishing stage. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets allow you to attach the screen housing to the structure above the drop ceiling. Closure doors keep the screen out of sight when it isn't being used.

The HD Progressive 1.3 surface has a gain of 1.3, 150° viewing angle, and is ideal for applications where projector brightness and screen size require an increase in gain. The pure white HD Progressive surface offers true color reproduction, and allows for more flexibility with ambient light conditions. This seamless surface also allows for easy viewing of detail in video as well as charts and graphs in a corporate setting. HD Progressive 1.3 can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. This surface has also achieved GREENGUARD GOLD Certification. Each side of the material uses a tab guide cable system to maintain even lateral tension and hold the surface flat. This helps to ensure that pixels from the display image don't overlap with one another. Tensioning also helps to prevent creases or folding of your screen. A custom slat bar with added weight maintains vertical tension on the screen surface.

For controlling the screen, a three-position Decora-style wall plate is included, along with a cover switch. Low Voltage Control allows the screen to be controlled via a low voltage signal or momentary dry contact from a third-party control system. The LVC is necessary if you are using an IR or RF remote to control your screen.

94" Diagonal    16:10 Aspect Ratio    HD Progressive 1.3 Surface    1.3 Gain, 150° Viewing Angle    Black Backing on Surface    Tensioned for Flat Image Display    110-120 VAC, 60 Hz Motor    Three-Button Decora-Style Wall Switch

The screen has two motors, both mounted inside the case. One motor operates the door at the bottom of the case, and the other controls the viewing surface.

The electrical junction box is internally integrated into the housing, making it possible to install the housing, and then wire to the building's electrical system during construction.

Smooth Roll Technology to keep your screen flat.

Slim-Tab, a lower profile, and strong tab design to keep your screen taut.

White powder-coated case with white endcaps and closure doors for a clean aesthetic.

The case is UL Plenum rated.

Related Questions and Answers

Q: 1. Can i use this with a softbox?

A: Yes.

Q: 2. Do these lights work with the Chimera F2X 5 x 15' Light Bank?

A: Yes, the Chimera Triolet Mogul Base Flood Light with Octaplus Speed Ring can work with the Chimea F2X 5 x 15' Light Bank.

Q: 3. Does it come with both E26 and 2-pin adapters?

A: This version B&H # CHTE does come with a 2-pin and a E26 adapter.

Q: 4. color temptrue?

A: I haven't put a color meter to it yet, but assuming somewhere in 3000 Kelvin range..

Q: 5. What is the color temeperature of the bulb?

A: 3200k

Q: 6. Can I put a CFL bulb in this ?

A: The Chimera Socket Adapter - Mogul to Medium Base, B&H # CHRMMB, would allow you to use a CFL bulb, such as either the Eiko Spiral Fluorescent Lamp (85W/120V), B&H # EIFS85, or the Eiko Spiral Fluorescent Lamp (105W / 120V), B&H # EIFS105Z, with the Chimera Video Pro Plus 1 Triolet Kit.

Q: 7. Could you put in a led light bulb in here?

A: It would greatly depend on the size of the LED bulb, as not all are made with a base that is narrow enough to fit the socket of this flood lamp.

Q: 8. does it work 500w

A: The Chimera Mogul Base Lamp - 500 Watts/120 Volts - for Lantern, B&H # CHLM500L, would be a 500 watt bulb that is compatible for use with the Chimera Triolet Mogul Base Flood Light.

Q: 9. Is the power adjustable?

A: The Chimera Triolet Flood Light does not have a control to adjust output power. As such, you would have to purchase a dimmer such as the Impact D1000 1,000W AC Dimmer Control (110-120V), B&H # IMD1000, for your planned usage needs.

Q: 10. Hi I have arri t1 1000 watt tungsten lights. What is my best fit to add soft box to them?

A: While there is no ARRI 1000W T1 Location Fresnel with Stand Mount (120-240 VAC) included in the above light kit, the ARRI Speed Ring for T1 and L7 Lamp Heads and Video Pro Lightbanks, B&H # ARSRCL7, and the Chimera Speed Ring for Video Pro Bank (Circular, 7.75"), B&H # CHSRC775VP, are speedrings you may use to connect a compatible universal square/rectangular softbox onto this light fixture. A link of compatible softboxes are listed below. https://bhpho.to/3NF5q2C https://bhpho.to/3Pr4lwG https://bhpho.to/3qZZW9y