The Lanparte Single Handle allows for single-handed support of 15mm LWS rod shoulder rigs, leaving your other hand free to focus the lens or adjust camera settings as you shoot. It is constructed from CNC machined aluminum and features a non-slip silica-gel grip and a dual rod clamp that places the handle directly below a pair of 15mm rods.

15mm Rod Shoulder-Mount Kit for DSLRs    Quick-Release Baseplate    Single Handle with Rubberized Grip    Shoulder Support with Offset Bracket    Follow Focus with Integrated Hard Stops    Adjustable Lens Gear Ring

Related Questions and Answers

Q: 1. Will it work with Didital Bolex?

A: Based on the dimensions of the DBDimensions (Body) 3.6H (91mm) x 3.3W (84mm) x 7.8D (199mm) This kit can take it.

Q: 2. Is this rig suitable for a Sony A7II?

A: You won't have any problems using this rig. The follow focus as well as the bridge plate are adjustable. That being said, I would suggest you to go for our LanParte MCK series rig which is specifically designed for Sony A7. It comes with a cage and everything! Check out these links1. Starter rig https://a href= http://www.bhphotovideo.com/c/product/1277385-REG/lanparte_mck_02_mirrorless_camerabasic_kit.html target= _blank www.bhphotovideo.com/c/product/1277385-REG/lanparte_mck_02_mirrorless_camerabasic_kit.html/a2. Pro rig https://a href= http://www.bhphotovideo.com/c/product/1277386-REG/lanparte_mck_03_mirrorless_camera_complete_kit.html target= _blank www.bhphotovideo.com/c/product/1277386-REG/lanparte_mck_03_mirrorless_camera_complete_kit.html/a

Q: 3. Does this work with a Panasonic GH4?

A: This Lanparte Starter DSLR Camera Rig Kit works very well with the Panasonic GH4. It is capable of handling all mirrorless cameras like the GH4 plus the physically larger DSLRs as well.

Q: 4. Has anyone flown a lighter RED/Alexa Mini on this? Wondering if it would work for the new RED Weapon series (RAVEN or SCARLET-W)

A: This rig as shown is off-set from the shoulder and thus puts the camera directly in front of the operator's face. This is what you want if you are using the rear screen of a DSLR to operate with. However, the camera's you mention all rely on a top or side monitors or viewfinders. I would suggest going with something like the Lanparte Starter DSLR Camera Rig Kit. It should work. Another is the ikan Elements Plus Shoulder Rig with Follow Focus.

Q: 5. Could you mount a Canon EOS R on this?

A: Yes, the LanParte Starter DSLR Camera Rig Kit is compatible with all DSLRs or mirrorless cameras.

Q: 6. Looking at this for freelance work with DSLR, at my regular job we have a Canon XA35. Would it work with the Canon?

A: It will indeed work with the Canon. Remove the off-set that is needed for the DSLR to set up for the XA35. (With the XA35's LCD open, you do not need the rigs off-set.) I am not seeing how the follow focus would work. I also do not think you need that.

Q: 7. Will this work with a blackmagic cinema camera?

A: While we have not tested that combination, we do not see anything that would say it would not work. To me, it looks that it should work well.

Q: 8. Does this work with a nikon D7100?

A: Hi Denise, unfortunately, I am not familiar with Nikon cameras... But I can tell you this: the screwing rod is a 1/4 of an inch in diameter. It works perfectly on my Canon 5D mark II. Hope this is helpful.

Q: 9. Can I mount my A7s on this?

A: You should have no problem putting an A7S on this rig. It is a universal rig that can work with a variety of DSLR and Mirrorless style cameras.

Q: 10. Is this suitable for use with a monitor? If so, how would you mount it?

A: Get an extra part and you are good to go! It's the LanParte MA-01 articulating arm for EVF/ Monitor. It is simply attached to the rods and can be adjusted to your preference.https://a href= http://www.bhphotovideo.com/c/product/1100209-REG/lanparte_ma_01_magic_arm.html target= _blank www.bhphotovideo.com/c/product/1100209-REG/lanparte_ma_01_magic_arm.html/a