The 220V 24741ELI Tensioned Contour Electrol 78 x 139" Motorized Screen from Da-Lite supports ceiling or wall mounting. Tensioned screens ensure the smoothest surface possible.

159" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Surface    1.3 Gain / 150° Viewing Angle    Low Voltage Control (LVC)    Video Projector Interface    Black Housing Finish    Smooth Roll Technology    Tensioning Cable System

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

Related Questions and Answers

Q: 1. Will it work with Samsung Galaxy S21 Ultra?

A: The Mini-P supports phones up to 3.48" in width, and will accommodate the Galaxy S21 Ultra (3" width).

Q: 2. I don't understand the note(When powered from AC, only 220V modeling lamps and heads may be used.) is there any specific 220v head and modeling lamp?

A: You can use a Speedotron 102 Black Line - 2400 Watt/Second Lamphead with 7" Reflector and UV Coated Flashtube, B&H # SP102UV7 and use a 220V modeling lamp inside of it like the Speedotron Modeling Lamp for 103 Flash Head (150W/220V), B&H # SPML150103X. The flash tube doesn’t need to be changed in this case. https://bhpho.to/39tgJnV https://bhpho.to/2TECquH

Q: 3. Will this gear function well with an Ikan Stratus follow focus?

A: Yes it will.

Q: 4. Can I use it in household outlets? House is 60 years old.

A: Check your circuit breakers,1,000 Watts needs a 15 amp breaker (10 amp is borderline). 20 AMP is best. Going with LED could be a better choice as they consume a fraction of the current.

Q: 5. What size should I purchase for the Sigma 10-20mm f/3.5 lens?

A: Thanks! I realized I can just measure the circumference and divide it by 3.14 (pi) and it comes out to 76.75mm so I actually answered my own questions. It's the (76 to 77.9mm) version.

Q: 6. What size do I purchase for use with the Voigtlander Nokton 25mm f/0.95 Type II Lens?

A: Please go to this web page and print out this template to determine the diameter of the lens and the matching size LuxGear. http://bit.ly/2phHhl7

Q: 7. What is the difference between the hanging mount and the stand mount version of this instrument?

A: The ARRI T1 1000W Location Fresnel with Stand Mount (120-240 VAC, Black) and Hanging mount are almost the same. The Hanging mount the yoke is set on top so it hangs correct from the ceiling. And stand mount the yoke is on the bottom so it can be positioned on a light stand.

Q: 8. Is this compatible with the Panasonic Lumix FZ1000?

A: no this will not support the Panasonic Lumix DC-FZ1000

Q: 9. How do you control the Panasonic ZS-100 with the gimbal controls? I understand any gimbal will balance the camera that meets the weight requirements.

A: The gimbal does not provide camera control.

Q: 10. I want to use the Chimera Octaplus Expandable 5' Light Bank with 7' Expansion Support Kit with this Lamp. Trying and figure out the diameter for the speed ring and other accessories but I can not find it, not even in the manual? can you help?

A: Speed Ring for Video Pro Bank - Circular 7-3/4 is what we purchased, $166. Not cheap considering we had assumed that all the accessories from our previous ARRI 1K would fit (not).