The Kowa Digidapter for TSN-880 and TSN-770 Series Spotting Scopes is a digiscoping adapter system that consists of three main components, a camera platform, an outer ring, and an inner ring. When combined, they allow a variety of camera types, including point and shoots, mirrorless, and DSLR cameras to effectively use a Kowa TSN-880 or TSN-770 series spotting scope as a telephoto lens.

Constructed from anodized, billet aluminum alloy for durability, the components of the Kowa Digidapter for TSN-880 and TSN-770 Series Spotting Scopes provide accurate, consistent alignment due to the ability to adjust the camera platform and outer ring according to a camera's dimensions so that the camera's lens is aimed precisely into the spotting scope's eyepiece. Both the camera platform and outer ring are securely connected to the eyepiece by a custom inner ring that is reversible so that the distance between the end of the eyepiece and your camera can be varied. This provides the ability to use not only smaller point and shoot as well as mirrorless cameras, but larger DSLRs, which even with relatively short lenses installed, require greater distance from the eyepiece for effective digiscoping.

Though preassembled and easy to install, the Kowa Digidapter for TSN-880 and TSN-770 Series Spotting Scopes saves time after the initial set up by allowing you to record your camera's position on the platform by means of included location pins. This feature allows for the camera to be removed from the platform for quick battery or memory card changes and then moved back into place without the need to reestablish focus.

Use Spotting Scope as Camera Lens    Fits Many Point and Shoot Cameras    Fits Most Mirrorless Cameras    Fits Some DSLR Cameras and Lenses    Easy, Fast Setup    Accurate, Consistent Alignment    Billet Aluminum Alloy    Anodized Finish    Portrait and Landscape Orientation    Camera's Position Can Be Saved

Allows a Kowa TSN-880 or TSN-770 series spotting scope to be used as a telephoto lens by point and shoot, mirrorless, or DSLR cameras

Accurately and securely connects a camera with a maximum lens diameter of 2.590" and maximum length of 3.525" from the center of its tripod socket to the end of its lens. An optional table extender, MFR #TE, increases this length to 4.150"

Set up is easy and fast, with further time saved through the use of included location pins that allow your camera's position to be recorded on the camera platform. After a battery or memory card change, camera focus does not need to be reestablished

The outer ring can be rotated to alternate between portrait and landscape orientations

Anodized billet aluminum alloy construction provides durability and minimizes reflections from the surfaces of the adapter components into your camera

Related Questions and Answers

Q: 1. Will this camera adaptor work with both the straight-view and the angle-view scopes?

A: The Kowa TSN-PZ Digiscoping SLR Camera Adapter BH #KOZPA6501000 • MFR #TSN-PZ is compatible with the Kowa 880/770 Spotting Scopes, straight or angled.

Q: 2. Hi. I have an A7 III and a Kowa TSN 884 with the TE-WZ 25-60x eyepiece. If I purchase this (TSN-CM2-SE T-Mount) and the TSN-PA7 photo adapter, am I all set or do I need to purchase any other adapters or rings? Thanks. Steve

A: Nothing extra would be needed.

Q: 3. Does it fit the right side of nikon3s prostaff?

A: Only compatable Nikon replacement parts should be used.

Q: 4. will the TSN-DA4 work on an older model Zeiss spotter 20x-60x? Approx 10 years old.

A: Unfortunately this Adapter is fairly dedicated. My apologies. I would recommend getting in touch with Kowa directly with this inquiry. KowaTel: 800-966-5692 or 310-327-1913 Website http://www.kowa-usa.com/ Email kowa-usa-info@kowa.com

Q: 5. Will this work on a TSN-821M?

A: Yes but you would need this adapter too: https://bhpho.to/3Gm09r3

Q: 6. Will this work on the sony A7R4?

A: Yes that will work on the A7r IV. It will pretty much work on any E mount camera. It is a manual adapter .

Q: 7. I have the Kowa Prominar 883. The TSN AS1.25K has male threads on its OD. I do not see where it would thread onto the scope. What am I missing?

A: It doss not thread into the scope. The side with the (2) retaining screws slip over the eyepiece and the retaining screws secure it to the scope.

Q: 8. what adapter do you recommend for the TSN-821?

A: The Kowa TSN-DA1 Digiscoping Digital Camera Adapter BH #KODPA • MFR #TSN-DA1 will work on a TSN-821 You will still need a TSN-AR adapter ring or TSN-DA4 adapter, sold separately

Q: 9. Can astro eyepieces be stacked on top of this?

A: The top part is configured for threaded T-rings(mount)

Q: 10. What is the purpose of the velcro on the eye piece end of carrying case? How does it work?

A: It allows you to fold back the case to it can stay open while using the scope. The scope can be used without being removed from the case