The Bassbone OD from Radial Engineering is a bass preamp with two instrument input channels, each of which is fully equipped with a level control, a passive-interactive EQ, and a low-frequency filter to help eliminate resonance. Channel-A is equipped with a PZB booster switch that increases the sensitivity and load to 10 MOhms to optimize it for use with piezo transducers as commonly used on upright bass. Channel-B is equipped with Drag Control load correction to optimize the tone and feel when using a passive instrument such as a vintage Fender bass. Toggling between channels is done using a footswitch. When using a dual pickup system, both channels may be mixed together by depressing the blend switch. Outputs include a 1/4" instrument level output to feed the artist's on-stage amplifier, plus a balanced low-Z Radial DI box output to feed the PA system. The XLR output can be assigned pre or post effects to suit your preference. A separately buffered tuner output works with the mute footswitch for quiet on-stage tuning.

If you use effects, both input channels can share the same pedals by connecting via the built-in send & receive effects loop. This is augmented with an on-board bass overdrive with control over the drive level and tone. The OD footswitch may be assigned to the loop, overdrive, or both. The Bassbone also features a built-in headphone amp with 3.5mm output.

Toggle between any two basses with ease

Bass overdrive with wet-dry control for extra grit

Drag control load correction for vintage basses

PZB booster and 10 meg piezo input for upright

Related Questions and Answers

Q: 1. How long would it take to fully charge a bebob V98MICRO V-Mount?

A: The bebob 1-Channel D-Tap Quick Charger would take about 2h 45m to charge 98wh batteries.

Q: 2. Can anyone recommend a cheap or inexpensive mixer that can handle 3-4 microphone inputs, and one output to our video recorder?

A: The Azden CAM-3 3-Channel Mic Mixer allows you to add and mix sound from three Azden wireless or hard wired microphone sources simultaneously. It easily attaches to the camera via 3.5mm (1/8 ) stereo mini output. Cables are included.

Q: 3. power supply, input ? 110v only or it has range 110-240v

A: This is made for 110v.

Q: 4. Does this receiver support Dolby TrueHD?

A: Yes

Q: 5. So Bought this through B&H. I notice it does not come with an AC power Outlet... Is that the case? If so, Where do we buy it from I guess.

A: That is correct. You would have to buy the Henry Engineering Henry Engineering Multi-System Power Pod. This is the B&H part number for the Power Pod BH #HEPP.

Q: 6. Can this power a subwoofer on its own or does it required a powered sub?

A: The Pioneer VSX-834 7.2-Channel A/V Receiver is made for compatibility with a powered sub.

Q: 7. I only have a viewfinder on my Nikon D3300. I assume I need to have my solar Glasses on as well as the camera solar filter?

A: Once the filter is secure you can look through the viewfinder. If you wear your glasses and have the filter you won't be able to see anything through it anyway.

Q: 8. Can you reverse the direction of the hand wheel for a left-handed operator?

A: The operating direction of the handwheel of the DJI 3-Channel Follow Focus Controller can be inverted in the settings on the DJI High Bright Remote Monitor. Under General Settings Three-Channel Follow Focus, you can select an option to invert the direction of the focus knob, zoom stick or iris slider.

Q: 9. The RX-V485 has "HDMI with Audio Return Channel." The RX-V385 (this product) has "HDMI with Audio Return Channel Support". What is the difference?

A: Same thing written slightly differently.

Q: 10. Can I calibrate stereo speakers?

A: The Sony STR-DH590 5.2-Channel A/V Receiver BH #SOSTRDH590 features Digital Theater Auto Calibration (DCAC) which automatically optimizes sound based on where you sit in relation to your speakers, to help give you the best from your home theater system.