The Audio-Technica ATW-1301/L System 10 PRO is a single-channel digital wireless lavalier microphone system featuring a half-rack ATW-RC13 receiver chassis equipped with one ATW-RU13 receiver unit. It is well suited for rackmounting in portable flight cases or for permanent installations in educational facilities, conference rooms, small to mid-sized venues, and houses of worship as well as broadcast studios.

The easy-to-use system comes preconfigured at the factory, ready to operate right out of the box with no setup required. Three levels of diversity reception and automatic frequency selection provide seamless, reliable performance with clear digital audio for presenters, lecturers, clergy, and performers.

The ATW-1301/L includes a bodypack transmitter and a miniature MT830cW omnidirectional lav mic for hands-free speech. The transmitter provides up to 7 hours of continuous use with two AA batteries, at a maximum range of 200'. Up to 10 mic channels can operate simultaneously in the same space.

The receiver unit can be removed from the chassis and mounted remotely (up to 328' away, connected via an Ethernet cable), for more reliable reception. The chassis can accommodate a second receiver unit (available separately), allowing you to set up a dual-channel wireless system—with an additional transmitter.

Up to five chassis can be linked using RJ12 cables, creating a stable environment in which up to 10 receiver units work together, with all receiving, transmitting, and frequency allocation coordinated to prevent audio dropouts.

For Presenters and Performers    Omni Lav Mic + Bodypack Transmitter    Receiver Link for Multichannel Setup    Triple-Diversity Rackmount Receiver    Remote-Mountable Antennas    7 Hours on AA Batteries    Expandable to 10 Mic Channels/200' Range

• The System 10 PRO offers full-bandwidth, 24-bit/48 kHz digital audio with none of the audio artifacts associated with analog companding.
• The low-visibility, miniature MT830cW lavalier microphone features a Hirose 4-pin locking connector and delivers a natural sound optimized for speech intelligibility. Its omnidirectional polar pattern ensures that the sound remains consistent, even when the speaker's head moves away from the mic.

Automatic Frequency Selection

• Just power up the components, and the receiver automatically seeks out a clean frequency and pairs up with the transmitter, saving you the hassle of scanning and syncing.
• While in use, the system continually monitors activity in the 2.4 GHz Wi-Fi range and automatically switches to a clean frequency to avoid interference if necessary.

Rugged Receiver Chassis

• The durable half-rack receiver chassis can house one or two receiver units and can be mounted alone using the included mounting brackets and screws. Two chassis can be mounted side-by-side using the included joining plate, allowing four wireless mic channels to occupy a single 19" rackspace for a compact multichannel installation.
• The chassis' front-panel display provides visual status information including RF signal level and the transmitter's battery life, along with a 3-color audio-level LED and a Pair LED.
• A System ID number display indicates which transmitter is associated with a given receiver.
• Rear-panel connections include balanced XLR and unbalanced 1/4" output connections as well as output level controls and ground-lift switchs to help eliminate audible hum caused by ground loops.

Versatile Receiver Unit

• The receiver unit features two removable antennas.
• A 1/4"-20 thread allows for mounting the unit to a bracket, stand, and other fixture. The unit can also be permanently wall mounted using the included receiver unit holder.

Lightweight Bodypack Transmitter

• The transmitter is housed in lightweight, plastic chassis equipped with a Hirose 4-pin locking connector and a belt clip.
• An internal input trim control can be set to match the sensitivity of your microphone or audio source for distortion-free input.
• With just a quick press, the power switch on the transmitter doubles as a mute function. This function can be locked out to prevent an accident.

Pairing Multiple Transmitters

• With this peer-to-peer system, the transmitter can only transmit to one receiver at a time. However, up to 10 transmitters can be paired with a receiver ahead of time. This is useful in situations when you have multiple speakers, one after another, and you need to have them miked up and ready to go. All you'll have to do is turn one transmitter off and the next one on.

Triple Diversity Reception Maximizes Wireless Signal Integrity

• Space Diversity: The receiver compares the signal showing up at its two antennas and chooses the strongest one.
• Time Diversity: The transmitter sends the digital signal in two imperceptibly different time slots and compares the two.
• Frequency Diversity: The digital audio is sent over two different frequencies at the same time and the system chooses the cleaner one.

For optimal performance, users are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.

2.4 GHz Wi-Fi Band

• Unlike traditional analog wireless systems, the System 10 PRO operates in the 2.4 GHz ISM band, away from interruptions and dropouts caused by TV and radio channel interference.

Audio-Technica offers a variety of lavalier, headset, instrument cable, and handheld microphone options to adapt your System 10 PRO as your needs evolve.

Presenters

• The AT831cW mini cardioid lavalier mic offers a narrower, feedback-resistant pickup pattern for louder events.
• The discrete PRO-92cW earset mic provides improved clarity in spoken word applications.

Vocalists/Presenters

• The ATW-T1002 handheld transmitter/mic is available for presenters and performers who prefer the flexibility of a handheld microphone.

Video Conferencing

• The ATW-T1006 boundary transmitter/mic is designed for tabletop use, ideal for applications such as video-conferencing where minimum visibility is required.

Conferences/Boardrooms

• The ATW-T1007 base transmitter can be used with a gooseneck mic on a table for situations where wired mics are impractical.

Guitarists

• The AT-GcW guitar cable lets you connect the bodypack transmitter to a guitar or bass.

Related Questions and Answers

Q: 1. My Sony ZV1 has a hum in the audio when I use this system. Any suggestions on how to get rid of it?

A: Hum is almost always caused by a faulty ground or poor connection. Herea are several possible explanations/solutions for you to try: 1. It could just be a bad input cable. If the shield is broken internally, you'll experience hum. Try replacing the cable or test it on a different device. 2. You may be using the wrong input cable. The Blink 500 Pro B2 system has a LOT of cables, and there are two different ones that look very similar. The TRS cable has two narrow black bands on its metal tip while the TRRS one, which has three bands. Since the ZV1 uses an unbalance stereo input, be sure you are connecting the receiver to the camera using the TRS cable.

Q: 2. 1. Can you set -12dB? 2. Is there backup recording internally?

A: The Saramonic Blink 500 Pro B2 2-Person Digital Camera-Mount Wireless Omni Lavalier Microphone System allows for adjustable output levels from its receiver and does not include any internal recording features.

Q: 3. can the receiver be used with Panasonic px 300 video recorder ?

A: The receiver can be connected to the microphone input on any recorder, camera, smartphone or other similar device to record audio. I am not able to find specifications for a Panasonic model PX 300 video recorder, but if it has a standard mic input, then the wireless mic system can be connected.

Q: 4. How far away from the person speaking can the transmitter be, and still get good sound?

A: For the best results when using the Saramonic Blink 500 Pro B2 2-Person Digital Camera-Mount Wireless Omni Lavalier Microphone System, the audio will be clearest when the microphone is pllaced within approximately 12 inches from the person's mouth.

Q: 5. Does a 3.5mm to XLR adapter would affect the quality ? Looking to plug this in my FS7

A: Saramonic Blink 500 Pro B2 will work with a XLR adapter without degrading the sound. I'm going to put a link bellow with a option for a 3.5mm TRS female to XLR male adapter. https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html

Q: 6. Where can I buy a replacement Furry High-Wind Press-On Windscreen for the transmitter? I can't find them anywhere and Saramonic support doesn't respond.

A: We do sell the Saramonic High-Wind Furry Windshield for Lavalier Microphones - 3-Pack (B&H # SASRWS2) which are replacements for the original furry windshields that came with the Saramonic Blink 500 Pro B2 Wireless Microphone System. As another option, you can use the Auray Fuzzy Windbuster for Lavalier Microphones - Black (B&H # AUWLW).

Q: 7. Where did the mic made?

A: This product is made in China.

Q: 8. Fxlion

A: Not sure what your question is here, but I'll bite. Adding a Fxlion battery to this set-up Will certainly give you a ton of extra power for the Blink 500 Pro series especially when you're on the go. Just make sure you get a Fxlion battery with USB-A out and you will have enough power to charge the Blink 500 Pro for weeks.

Q: 9. How does this package compare to the UHF version?

A: The Blink 500 Pro is a digital wireless mic system with 24-bit / 44.1 kHz resolution. It offers 18 frequencies between 2400 to 2483.5 MHz and has an operating range of up to 328 feet. The transmitters have a built-in omnidirectional mic and also include external omnidirectional lavalier mics. Transmitters accept mic or line-level signal and have a dedicated gain button for quick adjust of the signal level. The receiver's main output sends an adjustable mic-level signal, The transmitters and receiver are powered by built-in rechargeable batteries and the system can be charged inside the included case. The UwMic9 UHF system is an analog wireless mic system with 96 selectable frequencies between 514 to 596 MHz and has an operating range of up to 330 feet. The transmitters include external omnidirectional lavalier microphones and accept mic or line-level input signal. The transmitters offer three selectable levels of transmission power. The transmitters and receiver are powered by a pair of AA batteries. The output signal from both systems can be set for mono or stereo and receivers from both systems include a stereo headphone output for real-time monitoring.

Q: 10. Can this unit record on split channels? For instance Mic 1 on channel 1 and Mic two on channel 2?

A: Yes! In Stereo mode, the receiver splits Mic 1 to Left and Mic two to Right. In Mono mode, it mixes them together.