For use in studios and other applications which require SDI video feeds, this HDMI/VGA to 3G-SDI Scaler/Converter from Gefen will scale and convert VGA or HDMI signals to an SDI signal. Supporting Full HD video, all input signals can be scaled up to 1080p resolution. All settings within the unit can be changed via an OSD (On-Screen Display) menu system. Alternatively, the Gefen Syner-G software suite can configure the unit as well.

HDMI/VGA + Analog Audio Inputs    Supports 1080p60 Video    Video Scaling    OSD Menu Settings    EDID Management    Locking Connectors    6-24V Operation

• Converts and scales HDMI and VGA and L/R analog audio to SDI
• Input resolutions up to 1920 x 1200 (WUXGA) and 1080p60
• Output resolutions up to 1080p60
• On-screen display (OSD) menu allows easy set-up and control
• Aspect Ratio Control: Full Screen, Panoramic, Letter/Pillar, Extract/Crop
• Test Pattern Generator for quick system configuration
• Embeds 2-channel analog stereo audio in SDI signal (VGA Input only)
• Up to LPCM 7.1 audio support (HDMI input only)
• Gefen Syner-G simplifies in-field firmware updates and advanced EDID management including custom input timings
• USB port for use with Gefen Syner-G
• Wide power supply operating range (6V to 24 VDC)
• Locking power supply connector
• Surface mountable

Related Questions and Answers

Q: 1. can this convert incoming H265 to H264 signal output?

A: The AVMATRIX SC2030 3G-SDI/HDMI Scaling Cross Converter can support an H.265 signal in and an H.264 signal out, though this would be a codec conversion that's dependent on the software being used. This converter would only do resolution and framerate conversion.

Q: 2. Could you feed this a 4K HDMI signal and convert to 1080 on the SDI side?

A: The Lumantek EZ-HSV+ HDMI to SDI Converter with Display and Scaler cannot process 4K.

Q: 3. Can this convert from one frame rate to another? And/or Progressive to interlaced?

A: Yes, Please refer to the following link to check the resolution. You can able to convert Progressive to Interlaced or Interlaced to Progressive. http://lumantek.com/index/product_view/62

Q: 4. Will this unit work with Sony format 1080/23.98Psf?

A: No, the Lumantek HDMI/SDI Cross Converter with Audio Mux/Demux and Scaler does not support 1080/23.98Psf.

Q: 5. Does it come with the DE-9/DB-9 Input/Output connector cable?

A: Yes, the Lumantek HDMI/SDI Cross Converter with Audio Mux/Demux and Scaler comes with the following cable included 9-Pin to XLR Breakout Cable. More info: https://bhpho.to/3Y4quVM

Q: 6. Will this take the audio from HDMI and convert to SDI as well as the video? And if so, can you also input audio overlay with the HDMI audio as well?

A: The Lumantek EZ-HSV+ will take the video and audio from HDMI and convert it to SDI. The DIP Switch setting for AUDIO allows you to input audio overlay. https://www.bhphotovideo.com/lit_files/611210.pdf

Q: 7. Does this unit convert/scale SDI input to SDI Output?

A: The Lumantek HDMI/SDI Cross Converter with Audio Mux/Demux and Scaler is designed as a cross converter and it can perform conversion and scaling from either input to either output, as needed.

Q: 8. Does it bypass EDID / HDCP as i need to connect it to medical devices ?

A: The AVMATRIX SC2030 3G-SDI/HDMI Scaling Cross Converter cannot bypass HDCP.

Q: 9. Does this unit output on both HDMI and SDI simultaneously, while having a HDMI input?

A: Yes, the AVMATRIX SC2030 3G-SDI/HDMI Scaling Cross Converter will simultaneously output on both HDMI, and SDI when using the HDMI input.

Q: 10. Does this device test analog signals? Or just digital signals?

A: This is a HDMI to HD-SDI scaler. It converts HDMI signals (which are only HD or "digital") to SDI. (a signal type typically used in broadcast or television studios). I am not sure what you mean by "test", the device doesn't test anything. Although the display does offer confidence that the incoming HDMI signal is present and some basic information about the incoming HDMI signal. HDMI signals are very hard to test and require exotic equipment to truly test the signal (and cable). The Lumantek offers a particularly advanced features typically only found on much more expensive HDMI-HD-SDI converters/sealers; namely the option to set the outgoing resolution as fixed. This feature is particularly useful when using non-scaling video switchers such as the Black Magic ATEM series, which require specific set input specifications/resolutions. If you want to connect more than one HDMI device to the ATEM switcher, such as a DVD and PC, the Lumantek can make sure each HDMI device signal is converted to a single signal standard for use with the ATEM. Lumantek offers a companion product, the EZ-SHV+ scaler that converts HD-SDI signals to HDMI. We have deployed over 80 units without any product quality issues.