The Cable Techniques CT-PLR3X-24K is a 24" cable with a balanced TAF3 connection at one end and a balanced, male XLR termination at the other. Suitable for connecting Lectrosonic receiver outputs with camcorders and field mixers, the CT-PLR3X-24K utilizes Canare L2E5 cable.

For Lectrosonics LR Outputs    Facilitates Connections to Field Mixers    Facilitates Connection to Camcorders    24" Cable Length    Canare L2E5 Cable    Balanced TA3F to XLR-3M Connections

Related Questions and Answers

Q: 1. I own the Vello captain transmitter and one captain reciever, will my captain transmitter trigger this reciever? I know it wiould be manual that's not a problem for me

A: According to the Vello FreeWave LR Wireless Flash Trigger Receiver's instruction manual, when using Channels 1-4, the Vello FreeWave LR Wireless Flash Trigger Receiver can be triggered via the Vello Captain TTL Transmitter.

Q: 2. I have this kit plus a few extra receivers. Is there anyway to buy a different Phottix transmitter that supports HSS and use with the 3 Ares receivers I have?

A: Since HSS is a product of the TTL system in the camera which is being used, there is no way for a manual trigger such as the Phottix Ares or the Vello Freewave LR to become HSS ready. The only way to have HSS is to use a Phottix trigger such as the Odin or Odin II. Additionally, the Vello Freewave LR works on a different frequency all together, therefore cannot be triggered by another other brand of radio trigger.

Q: 3. Does this work on a Nikon Z7?

A: These will work with a Nikon Z7.

Q: 4. Will this work on a Profoto Clic Softbox Octa (2')?

A: The Angler FB-G24 Fabric Grid for FastBox FB-24K Octagonal Softbox (24") will NOT fit on Profoto Clic Softbox Octa (2').

Q: 5. Is it compatible with Nissin di622?

A: While this trigger could work with the Nissin Di622, it has not been tested to our knowledge. Your results may vary.

Q: 6. will this work with Olympus 900r and 600r flashes ?? J. Payne

A: Yes, it is possible to use the Vello FreeWave LR Receiver with the Olympus FL-900R Electronic Flash and the Olympus FL-600R Flash mounted to the hot shoe on the bottom of the flashes listed above. However, do note that you would also need the Vello FreeWave LR Wireless Flash Trigger on the camera's hot shoe, and the transmitter is not sold by itself. As such, if you do not already own the transmitter, it would be better to purchase the Vello FreeWave LR Wireless Flash Trigger and Receiver Kit, B&H # VERFWLR, or the Vello FreeWave LR Kit with 2 Receivers, B&H # VERFWLRK, both which include the transmitter in the kit. Do note that these transmitters are fully manual, so you would have to set your flash output power manually as TTL automatic output is not compatible for use with the Vello FreeWave LR radio remotes.

Q: 7. Is it work with Nikon D750 and Nikon Speedlight SB-900?

A: The Vello FreeWave LR Wireless Flash Trigger and Receiver Kit BH #VERFWLR will work in manual with an SB-800 and a D750.

Q: 8. Will this set work with the Sony A7R2 and the flash mecablitz 52AF-1?

A: Unfortunately the metal foot is not compatible with the Sony Multi Interface shoe.

Q: 9. Work with Samsung NX 30 ?

A: I DO NOT KNOW ANYTHING ABOUT THE SAMSUNG NX 30. I PURCHASED THE KIT TO USE ON SONY A6000. IT WORKS BETTER THAN I HAD HOPED. I CAN MOUNT THE TRIGGER ON THE A6000 AND TRIGGER A NIKON SB700 WITH NO PROBLEMS. I USE THE SB700, BECAUSE IT WILL NOT WORK WITH SOME SONY EXTERNAL FLASHES. I HOPE THIS HELPS.

Q: 10. Will this work with two Godox mono lights and a camera without a hotshoe? I recent got a second Godox mono light and want to use both lights with my large format camera, previously I just used the cable that came with the Godox mono light and connected one end to the light and the other end to the port on my Large Format camera but to use both lights simultaneously I need a remote trigger and receiver, trying to see if this one would work...

A: The receivers in this kit can connect to each Godox monolight. The transmitter can connect to your large format lens via the sync terminal using the Impact Miniphone Male (3.5mm) to PC Male Sync Cord (18"), BH # IM10032390. http://bhpho.to/3aTU8Vg