Designed to eliminate the extra step of finishing the screen with trim, the 120V 24706BLSI Tensioned Advantage Electrol 54 x 96" Ceiling-Recessed Motorized Screen from Da-Lite is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening eliminating the need to complete additional trim work. Sliding installation brackets are included to make it easy to attach the screen housing to the structure above the drop ceiling.

The Advantage Electrol screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage and the fabric assembly can be completed during the finishing stage.

Note: This box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24706FLSI.

110" Diagonal / 16:9 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Slim-Tab Tensioning System    White Powder-Coated Case    Installs Above the Ceiling    Black Backing Standard    Box Only (No Screen Fabric)    Silent Motor    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Tensioning Cable System to prevent warping and ensure even lateral tension

• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Black-backed screen material for enhanced image quality and opacity
• Seamless surface

This screen comes with the box only, meaning the desired screen material must be purchased separately. This design allows the box to be installed during the construction phase while the screen can be installed later, once construction is complete. This ensures the screen won't be damaged during construction

Designed to provide silent operation when raising or lowering the screen

Allows projectors with 5 or 12V LVC leads to automatically trigger the screen to raise or lower whenever the projector is turned on or off

Allows the included wall switch, as well as devices such as automation systems, third-party wall switches, and remotes that support LVC, to raise or lower the screen remotely

Related Questions and Answers

Q: 1. Is studio one 4or5 and or an upgrade?

A: This audio interfae comes with a Presonus Studo One Artist software download, which can be upgraded to the latest version of Pro. PreSonus Studio One 5PreSonus Studio One 5 Professional - Artist Upgrade - Complete Music Production Software (Activation Card), BH #PRS15ARTUPGC Professional - Artist Upgrade - Complete Music Production Software (Activation Card) would be one such apgrade currently available. BH #PRS15ARTUPGC

Q: 2. I have a Surface Pro laptop that is 11.5" w, 8" tall, and less than 1/2" thick. Would it fit in the laptop compartment?

A: Personally, I would not recommend it. While there is a possibility it may fit, it may be extremely snug and hard to get in and out due to its larger size. Only tablets/laptops with an 11-inch diagonal screen size are recommended for the laptop/tablet pocket on the Ruggard Journey 54 DSLR Shoulder Bag.

Q: 3. Is the Tascam DR-10 lav compatible?

A: Yes, the Tentacle Sync TRACK E Pocket Audio Recorder Basic Box with Timecode Support is compatible with the TASCAM TM-10LB Lavalier Microphone for DR-10L Digital Recorder.

Q: 4. Is this bag water proof to protect camera and lens from rain?

A: The Ruggard Journey 54 DSLR Shoulder Bag (Black) is Water-Repellent Polyester & Nylon. But for bad weather it does come with a Rain Cover.

Q: 5. will this device work with other lav mics? If I wanted to plug in a rode or sennheiser lav, would all the functions work?

A: This pocket recorder can use any mic wired with the Sennheiser wiring, and with a locking 3.5mm connector. These include Sennheisr, Rode and other brands like Countryman and Tram,. PLease be aware that Sony wired lav mics will NOT work with this unit, even though they have the same connection.

Q: 6. Stereo or mono-only input?

A: The Tentacle TRACK E is a mono recorder. It records one track only.

Q: 7. Will this fit a Nikon Z7 ii with battery grip and 1-2 lenses?

A: The Nikon Z7 II Mirrorless Camera with the Nikon MB-N11 Power Battery Pack with Vertical Grip attached and one small lens will fit in the Ruggard Journey 54 DSLR Shoulder Bag (Black).

Q: 8. I have a Surface Pro laptop that is 11.5" w and 8" tall but less than 1/2" thick - would it fit in the laptop compartment?

A: No it will not fit comfortably

Q: 9. Right out of the box, is the unit's default set to 24 or 32 bit audio?

A: The default is 24-bit.

Q: 10. Can this device also work as an on-camera recorder? I would like to plug in a Rode VideoMic NTG to take advantage of the small size and 32 bit float technology and then also send the sync signal from the recorder to my unbalanced audio in jack. This solution would be amazing for cameras with bad pre-amps when you need to shoot with a mic on the camera. I don't mind connecting to a Sync E to complete this task if necessary but I would love to have a small, 32 bit float recorder on my camera (rather than both devices on the camera). Thanks

A: A shotgun mic with an XLR connection can be attached to this unit using an adapter cable, such as the Remote Audio 3-Pin XLR Female to 3.5mm TRS Locking Adapter Cable for Sennheiser G3 / G4 Transmitter (2'), BH #RECASENK1KG3. While Time Code cannot be sent out of the Sync Track E, it can be accepted or jam sync'ed , using a Sync Sync E Timecode Generator with Bluetooth (Single Unit), BH #TETE1, which would then be outputted to your camera's 3.5mm mic input.