The D3 Tornado Dual Blower Camera Enclosure from Dotworkz features dual fans with 20 CFM (Cubic Feet per Minute) of air movement, keeping the camera and components inside from overheating when the temperature rises. The blower provides protection against environments with 95% humidity in temperatures up to 140°F, making it a suitable solution for hot and humid environments.

The D3 enclosure is compatible with multi-sensor 360 and 180° panoramic PTZ, dome, and mini-dome cameras . In addition to a camera, it can also hold an NVR, router, or other hardware. The IP68-rated enclosure is made of durable, impact-resistant, and weatherproof protective thermal plastic polycarbonate. It is powered via a PoE (Power of Ethernet) connector.

Compatible with Analog & IP Cameras    20 CFM Air Movement    Dual Fans for High Air Flow    Made of Polycarbonate Thermal Plastic    IP68-Rated Enclosure & Ports    Vari-Fit Internal Bracket Included

Compatible with IP and analog cameras

Vari-Fit internal bracket included for perfect fit

Impact-resistant polycarbonate thermal plastic

20 CFM high-flow air movement from the dual blower

IP66-rated against dust and salt water

IP68 (waterproof) connection ports

Onboard component mounting space for: routers, cellular transmitters, hard drives, UPS, WiMAX, and mesh hardware

Onboard antenna mounting tab

Heavy-duty lower lens

Related Questions and Answers

Q: 1. Can you control zoom and focus simultaneously or only one at a time?

A: With compatible cameras and lenses, it is our understanding that both the zoom and the focus are independent.

Q: 2. can this be used to clean the image sensor?

A: Do NOT USE THIS TO CLEAN THE SENSOR!

Q: 3. How useful is this design for handheld work (not on shoulder)? I don't find any images of it angled back toward camera operator on left side of camera (just forward for shoulder rig). If holding at chest or waist level, would it be comfortable to focus?(And I assume one can hold the handle of the ff to support the camera? No slip being just on one rail?)(FYI: Would ideally be used on FS5 with no rig.)

A: I have an fs7, and the configuration you are talking about works nicely, especially if you have the zacuto universal baseplate as the connection point for your 15mm rods, which is what i have.

Q: 4. Is the brush anti static?Jay

A: No, the included Goat's hair brush is not an anti-static brush.

Q: 5. Can I choose the cleaning solution, I want ROR.

A: Unfortunately, you could not choose/switch out the cleaning solution that comes with this kit.

Q: 6. does this fit HIK DS-2DE4A25IW-DE?

A: The Dotworkz 4K Optically Pure Vandal Tough Clear Lens for D-Series Camera Housings BH #DOKTCLNS4K mounts securely to Dotworkz D2 and D3 camera housings. Any compatibility with other cameras is purely coincidental.

Q: 7. Has Zacuto fixed the problem with operation in hot temperatures?

A: There have been no updates on this from the manufacturer

Q: 8. We wish to use the Zacuto Z-drive with the Canon C100 Mark II mounted to the DJI Ronin Gimbal & attached to the EASYRIG CINEMA 3 with the Flowcine Puppeteer. Do you know if it will be compatible?

A: Using a manual follow focus with a gimbal defeats the purpose of the gimbal. every time you touch the focus handle you will move the camera. What you need for that kind of setup is a wireless follow focus. The other option is to remove the Ronin and mount the C100, with the Z-drive, directly to the Easyrig.

Q: 9. Does it come with follow focus gear rings? For PhotoLenses

A: Unfortunately no. B&H # (this B&H kit) ZAZDRVK, does not dome with any Follow Focus Gear Rings. Only the Z-Drive and Tornado Grip for Z-Drive. Zacuto Z-Drive https://www.bhphotovideo.com/c/product/1011583-REG/zacuto_z_drive_with_tornado_grip.html Zacuto Tornado Grip for Z-Drive https://www.bhphotovideo.com/c/product/1007083-REG/zacuto_z_trn_tornado.html

Q: 10. does it make a whistle sound? looking for one that is silent.

A: It does not make a whistle. However, it is not silent for it makes whooshing sounds. I don't know of a rubber blower that is silent. I would suggest a camel hair brush for silent operation.