The 1MP Cube Camera from ACTi features a 1/4" progressive-scan CMOS image sensor to deliver high-quality images at a resolution of up to 1280 x 720 at 30 fps. The 4.2mm fixed lens with an f/1.8 aperture provides a 53.8° horizontal field of view. Wide dynamic range, white balance, automatic gain control, and digital noise reduction features allow for clear images when there is ambient lighting or in low-light scenarios.

Motion Detection triggers an alarm when movement is detected in a designated portion of the video display, and 4 configurable privacy masking regions enable you to block certain portions of an image for security reasons. A built-in microphone and a 3.5mm jack offer two-way audio, enabling you to communicate with those you are monitoring. The camera also comes with a terminal block which allows you to attach an additional speaker and/or microphone.

1/4" Progressive-Scan CMOS Sensor    1MP Resolution @ 30 fps    4.2mm Fixed Lens    53.8° Horizontal Angle of View    H.264 and MJPEG Compression    Built-In Microphone    PoE Power Source    Simultaneous Dual Streaming    4 Configurable Privacy Masks    CS Lens Mount

Progressive scan CMOS sensor

Minimum illumination of 0.1 lux at f/1.8

Built-in 4.2mm lens allows you to record footage in 1MP resolution at 30 fps

Selectable H.264 and MJPEG compression formats with dual streaming

Two-way audio (speakers available separately)

Video motion detection

Powered by PoE Class 2

Related Questions and Answers

Q: 1. I bought the LUME Cube 2.0 and the ball head is included. Is this the same one ?

A: No, according to manufacturer packaging, the mount included in basic package is a simple cold shoe mount that does not have ball mount features (pivoting).

Q: 2. Can this be attached to a standard baseplate or do you have to have the movecam baseplate?

A: The riser block is cut with a dovetail on the bottom intended to slide into the Movecam baseplate. However, the riser block is also drilled and tapped on the bottom for one centered 3/8 hole and four additional 1/4 holes. So, I'd say it's possible to mount the riser on a standard baseplate.

Q: 3. I’d like to use the large cube in the fstop gear 37L Loka bag. Will it fit and are the attachment points compatible?

A: The Peak Design Camera Cube V2 (Black, Large) will fit in the f-stop Loka UL 37L Backpack. The attachment points are not compatible, however.

Q: 4. Does this include the lens support screw that attaches to a metabones adapter?

A: yes

Q: 5. Can the Wandrd Pro Deep Camera Cube be used with the 41-Liter Wandrd PRVKE camera backpack?

A: The WANDRD Pro Deep Camera Cube (Black) fits inside the WANDRD PRVKE 41L Backpack (Black), and can be used with that backpack.

Q: 6. Will it work on a mic stand?

A: If your mic stand has a 3/8"-16 or 1/4"-20 mount, the Lume Cube Ball Head Camera Mount would be able to mount to it.

Q: 7. Im interested in a purchase of a steadicam vest and I would like to know, whats the difference between EXOVEST and GOOFY EXOVEST?

A: Whether you are RIGHT HANDED or LEFT HANDED all you need to do is flip the BLOCK. This apply's to the either BLOCK; large of small block.

Q: 8. Would this fit at the top inside the ProTactic 450 AWII? Looking for a separate insert to use as a top section inside the 450 AWII, somewhat creating the idea of a separate top storage area like in the Fastpack 250, but in a larger bag.

A: The Lowepro GearUp Pro II 8L Camera Cube (X-Large) will fit in the Lowepro ProTactic BP 450 AW II Camera and Laptop Backpack.

Q: 9. Will this cube fit inside Shimoda Explore 35? I'm looking for something that can fit a 600mm gm in Shimoda explore 35.

A: The WANDRD Pro Deep Camera Cube (Black) will not fit in the Shimoda Explore 35.

Q: 10. How does this compare with a regular camera mounted flash in terms of brightness?

A: Since the CNS-40B Constructor Large Block Bi-Color On-Camera LED Light is a continuous light it cannot be compared to a flash.