The AMT LS is a professional brass and woodwind microphone system. The LS microphone attaches to the bell of brass and woodwind instruments. The cardioid polar pattern minimizes off-axis noise and feedback. The included BP40 belt-pack provides power and a standard XLR output. The combination provides the perfect mobile microphone system for stage and studio application.

The BP40 belt-pack power supple also provides a standard XLR output connection.

The system provides high SPL handling, minimizing noise while capturing transient peaks.

The cardioid polar pattern minimizes off-axis noise and feedback.

Related Questions and Answers

Q: 1. Can the flat plate on top of the glidecam be removed and just put the quick release plate on?

A: No the flat plate on top is also the front to back and side to side adjustment. The quick release that was promoted for this item is a very poor design. Difficult to release because of the quick release location.

Q: 2. Does this product have PPPoE?The setup I am looking at has PPPoE to a 3G access point that has an ext antenna and is connected via an injected POE adapter.Its currently connected to a cheap Netcomm (using PPPoE)

A: This router does support PPPoE. However it does not supply POE power.

Q: 3. I am searching for stabilizer for my canon 5d mark iii with 24-70mm for filming... don't know which is best because of the weight, xr 2000 or hd 2000?

A: HD is the up-to-date version. The fact is, if you are flying a Glidecam, you are not going to be operating your zoom or focus ring while doing so. Both hands on the Glidecam. Set it and forget it. Add a filter, adjust your balance. Forget to take the lens cap before balancing? Set your balance with a quick twist of the knob. Change lenses? Set your balance. Add a VidMic Pro? ....... Windy day? Add more weight plates to the base and....

Q: 4. Could I use HD2000 with a rebel T3i and a 18-55 lens? Is HD2000 made for heavier camera and it wouldn't work for such light kit?

A: Yes! I use a a6300 on it that is lot lighter and it works good!

Q: 5. Is their a warranty on this item when you purchase it?

A: The Glidecam HD2000 comes with a 90 day warranty.

Q: 6. What are the dimensions of the cart when it is folded up?

A: hello! When folded up it's pretty small 13x23 inches. Great product, lightweight.

Q: 7. Will this glidecam hd2000 balance properly with a 5D Mark II? Also, the lens that I have is 24-105mm. Any help would be great!

A: This stabilizer will easily balance with the weight of a 5D mrk ii. The trick about a zoom lens, however is that the glass moves and changes the CG of the whole setup. Even though the changes are slight, you will notice a difference in the balance of the unit from 24mm to 105. You will also notice a big difference if you balance it with the lens cap on and then take it off. This is the nature of any passive stabilization system, which is why people often use prime lenses for this type of setup, or just deal with slightly less than perfect balance.

Q: 8. Can it stand up on its own?

A: Yes, but I wouldn't leave it with a camera attached. It's very tippy and would be easy to accidentally tip over and damage your equipment.

Q: 9. does the gimbal move

A: If balanced properly the sled and post should remain level and plumb regardless of the handle position.

Q: 10. how to quick release camera?

A: Buying a quick release plate for your camera is a MUST. Attach the quick release plate to the stabilizer, and the camera to the quick release plate. I chose a plate based on what was compatible with my tripod-- otherwise you'll need to switch out which defeats the purpose of a QUICK release plate.