The COB Cannon Wash Pearl from American DJ uses advanced RGBA COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high-output, smooth color mixing LED PAR with no RGBA shadows. It is designed for mobile or permanent wash lighting of stages, clubs, dance floors, and churches. The COB LED engine on the COB Cannon Wash Pearl is a QUAD RGBA 4-in-1. It also doubles as an uplight with its dual yoke that act as legs to set the fixture upright to wash walls and ceilings.

It has 7 DMX channel modes for programming flexibility, built-in color macros, and 5 selectable dimming curves. The fixture has other advanced features such as 0 to 100% electronic dimming, strobe/pulse effect, flicker-free operation, DMX and powerCON power daisy-chaining, and a 4-button DMX display.

The COB Cannon Wash Pearl comes in an off-white casing and has a massive 80° beam angle. It comes with easily replaceable 40° and 50° lens to adjust the beam angle. 

COB Technology (Chip on Board) with one Quad (4-in-1) RGBA COB LED

Off-white metal casing

Produces smooth RGBA color mixing with rich palettes of color

Use as wash/PAR or pixel-mapped for visual effect

64 x built-in color macros

Flicker-free operation (no flickering on camera)

LED pulse and strobe effect

Five selectable dimming curves: Standard, Stage, TV, Architectural, and Theater

Includes lens kit to change to 40° or 50° beam angle

3-pin and 5-pin XLR chassis mount connectors for DMX linking

powerCON AC input/output to daisy chain power (up to 5 fixtures)

4-button digital DMX display on rear panel

Compatible with ADJ RFC wireless remote control (sold separately)

Dual yoke allows fixture to be mounted on truss or set on the ground

Related Questions and Answers

Q: 1. Does this small light can take the weight of a big light modifier such as 90cm or 120cm ones?

A: The amaran COB 60d S Daylight LED Monolight can accept any Bowens mount modifier without an adapter. The light itself can take the weight. The concern lies in the strength of the tilting stand mount with an umbrella holder that comes with the amaran COB 60d S Daylight LED Monolight. The weight of a 120cm (47") modifier may cause the light to tilt downward, unless the tilting stand mount is tightened properly.

Q: 2. Can a chimera softbox go over top?

A: When attaching a softbox to a light, such as the amaran COB 200x S Bi-Color LED Monolight, one uses a speed ring to connect the light to the box. See: Impact Speed Ring for Impact, Bowens S, Westcott & Aputure (B&H # IMSRIMPV2: https://bhpho.to/3QVVK5I).

Q: 3. What are the dimensions of the light fixture?

A: The amaran COB 100x S Bi-Color LED Monolight lamp head without the mounting bracket is 8.1 x 4.5 x 4.5".

Q: 4. How much will this light last if powered with two NPF 970 batteries?

A: With an average capacity of 57Wh for a NPF-975, the amaran COB 60x S Bi-Color LED Monolight BH #AMAPA0020A20 would have a run time of just under 2 hours.

Q: 5. Do you need the COLBOR Studio App to control special effects or is the light fully operational locally?

A: No, you do not need to use the App., the effects on the COLBOR CL60R RGB COB LED Monolight can be set from the back panel on the light.

Q: 6. When combined as shown with other units do they each need to be plugged in or do they power each other in series?

A: Each COLBOR CL60R RGB COB LED Monolight needs to be plugged into an outlet in the wall to power them.

Q: 7. Is this light only powered by USB-C?

A: The USB-C port on the COLBOR 65W RGB COB LED Video Light would handle its included AC adapter, a USB-C battery bank or the optional COLBOR V-Mount Adapter + D-Tap to Type-C V-Mount Battery Cable, BH # COVM2KIT. https://bhpho.to/3i5Bwrj

Q: 8. Would the Amaran 60Xs performs 100% power with two NPF 970 batteries?

A: Yes, the amaran COB 60x S Bi-Color LED Monolight will perform at 100% output when used with two NPF-970 batteries.

Q: 9. What are some compatible barn door options, making it similar to the Light Storm 60x?

A: The amaran COB 60x S Bi-Color LED Monolight works very well with this barn door. https://bhpho.to/2DAUUqo .

Q: 10. The mounting bracket doesn't fit securely to the top of my Impact light stand. Is there an adapter I should use?

A: There is a "Swivel Mount: 5/8" Receiver to 1/4"-20 Male Screw" adapter included with the amaran COB 60x S Bi-Color LED Monolight which will work with a light stand having a 5/8" stud on the top; the amaran light fixture itself has a female 1/4" thread which will work with a light stand having a 1/4" mounting screw on the top.