The beige Sanken COS-11D Omni Lavalier Microphone with Normal Sensitivity and LEMO 3-Pin Connector for Wisycom Transmitters is a subminiature lav microphone designed to deliver clear, full-bodied sound and reliable performance, making it a popular choice among industry professionals in broadcast, TV, theater, film, videography, and more. 

Engineered to meet the standards of modern digital wireless microphone systems, the COS-11D is RF shielded to eliminate interference issues and ensure a pristine audio signal. The microphone capsule features a rectangular design that sits vertically, increasing the surface area and allowing this tiny mic to offer a rich, full sound that outperforms many larger models.

The mic's 50 Hz to 20 kHz frequency response rolls-off extreme low end and provides accurate, transparent audio reproduction with a small presence boost in the 6 kHz area for crisp, intelligible speech. With a forgiving omnidirectional polar pattern that picks up sound in a 360° pattern, levels stay consistent, even when the subject turns away from the mic.

A water-resistant mesh screen protects against humidity, perspiration, makeup, bad weather, and other potential on-location issues, while the durable cable is also moisture-resistant and built to stay soft and pliable, even after extended use. This version of the COS-11D terminates in a 3-pin LEMO connector and is wired for use with Wisycom transmitters. Accessories are available separately and are not included with this configuration of the microphone.

For Broadcast, Film/Video & Presentation    Omnidirectional for Consistent Levels    For Wisycom Transmitters with LEMO    Normal Sensitivity Level    Rugged 5.9' Cable Stays Pliable    RF Shielded for Digital Wireless    Water Resistant    Small Size is Easy to Conceal    Requires 3 to 10 VDC

• Wisycom: Works with Wisycom bodypack transmitters equipped with a LEMO 3-pin connector, including the MTP 40 and MTP 41 (LEMO versions).
• Also works with third-party wireless transmitters that are equipped to supply 3 to 10 VDC through a 3-pin LEMO connector wired for Wisycom compatibility.

Related Questions and Answers

Q: 1. What's the impedance on the headphone connector?

A: This headset connection on this mic would be best used with a headphone around 32 ohms.

Q: 2. Does this has extreme wether proof design and RF rejection like NTG3 and Senn MKH416?

A: The Sanken is fairly robust in adverse weather, but it is not weather-proofed. Its directionality is comparable depending on the environment.

Q: 3. Can I simply attach this to a shoe mount on the FX3 and use it?

A: Yes. The CS-M1 will work with the FX3

Q: 4. hi i live in the caribbean on the island of St Vincent and the Grenadines , what frequency range should i get ?

A: The versions of the Sony UWP-D27 which we carry are only guaranteed to work within the USA. Unfortunately we cannot advise on compatibility of radio equipment in other countries, as every area will have its own laws & regulations regarding which UHF frequencies can and cannot be used.

Q: 5. Does this Rycote Softie Kit MFR #033395 work with Schoeps CMC641-- MFR #CMC641G SET?

A: Yes, the Rycote 033395 Softie Kit for Sanken CS-M1 Microphone with Windshield and Shockmount can also be used with the Schoeps CMC641 Set Colette Series Supercardioid Microphone.

Q: 6. Can the receiver be used while plugged into power?

A: No, the receiver's battery needs to be charged in order to function.

Q: 7. Does it come with a case?

A: No, it does not. We offer a nice waterproof case from SKB that already has the cut outs for the transmitter and receiver, and has some room for accessories. https://www.bhphotovideo.com/c/product/1288521-REG/skb_3i_0907_bh1_iseries_waterproof_sennheiser_ew.html

Q: 8. Can these lavalier be wirelessly connected to a soundboard?

A: Yes. The Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System can be connected to a soundboard (mixer). The system comes with two receiver output cables, one with a 3.5mm connector and one with an XLR connector. You can use the cable with the XLR connector to send the output from the receiver into a mic input on the board.

Q: 9. Can I use the Sony UWP-D27 to wirelessly feed a Sony A7s from my mixer’s two channel output?

A: Yes, the UWP-D27 2-Person Camera-Mount Wireless System can be used to send a line signal from the left and right outputs of your mixer to your Sony a7s Mirrorless Camera. The 2 x UTX-B40 Wireless Bodypack Transmitters can send the independent left and right outputs of your mixer to the URX-P41D Dual-Channel Camera-Mount Wireless Receiver. The left and right outputs of the URX-P41D Receiver can then send a stereo line signal to your Sony a7s Mirrorless Camera by utilizing the XLR-K3M Dual-Channel Digital XLR Audio Adapter Kit (sold separately).

Q: 10. Will this work for the Sennheiser MKH8060 or is there a better choice for that?

A: The Rycote Standard Hole Classic Softie Wind-Screen (BH #RYS12M) is a better option for the Sennheiser MKH 8060.