The black Sanken COS-11D Omni Lavalier Microphone with Reduced Sensitivity and LEMO 3-Pin Connector for Wisycom Transmitters is a subminiature lav microphone designed to deliver clear, full-bodied sound and reliable performance, making it a popular choice among industry professionals in broadcast, TV, theater, film, videography, and more. 

Engineered to meet the standards of modern digital wireless microphone systems, the COS-11D is RF shielded to eliminate interference issues and ensure a pristine audio signal. The microphone capsule features a rectangular design that sits vertically, increasing the surface area and allowing this tiny mic to offer a rich, full sound that outperforms many larger models.

The mic's 50 Hz to 20 kHz frequency response rolls-off extreme low end and provides accurate, transparent audio reproduction with a small presence boost in the 6 kHz area for crisp, intelligible speech. With a forgiving omnidirectional polar pattern that picks up sound in a 360° pattern, levels stay consistent, even when the subject turns away from the mic.

A water-resistant mesh screen protects against humidity, perspiration, makeup, bad weather, and other potential on-location issues, while the durable cable is also moisture-resistant and built to stay soft and pliable, even after extended use. This version of the COS-11D terminates in a 3-pin LEMO connector and is wired for use with Wisycom transmitters. Accessories are available separately and are not included with this configuration of the microphone.

For Broadcast, Film/Video & Presentation    Omnidirectional for Consistent Levels    For Wisycom Transmitters with LEMO    -9 dB Reduced Sensitivity Level    Rugged 5.9' Cable Stays Pliable    RF Shielded for Digital Wireless    Water Resistant    Small Size is Easy to Conceal    Requires 3 to 10 VDC

• Wisycom: Works with Wisycom bodypack transmitters equipped with a LEMO 3-pin connector, including the MTP 40 and MTP 41 (LEMO versions).
• Also works with third-party wireless transmitters that are equipped to supply 3 to 10 VDC through a 3-pin LEMO connector wired for Wisycom compatibility.

Related Questions and Answers

Q: 1. is this compatible with go pro hero 7?

A: Yes, the Rode Wireless GO II Compact Digital Wireless Omni Microphone System/Recorder is compatible for use with the GoPro HERO7 Camera when using the GoPro Pro 3.5mm Mic Adapter (B&H # GO35MA). The 3.5mm output from the Wireless GO II receiver can be connected to the 3.5mm mic input on the GoPro Mic Adapter to record audio with video on the HERO7.

Q: 2. The windscreen on the original Wireless Go had a propensity to come off. Has Rode changed the design so that the windscreens stay on the Wireless Go II transmitter?

A: Yes, Rode did improve the design of the windscreen for the Wireless GO II as well as for the original Wireless GO so it will stay securely on the transmitter.

Q: 3. Will that future update allow multiple GO 1's transmitters to connect to the new go2 receiver? Aka could i add in my original one to have 3 Transmit and 1 receiver?

A: No. The Wireless Go II receiver has two channels and will only function with a maximum of two transmitters. Any future firmware updates would not create a third channel for the receiver.

Q: 4. Latency?

A: 3.5ms-4.2ms

Q: 5. Can you record audio to transmitter and receiver output at the same time?

A: Yes, the transmitters in the Rode Wireless GO II 2-Person Compact Digital Wireless Microphone System/Recorder are capable of internal recording while simultaneously transmitting to the receiver for recording to an external device such as a camera.

Q: 6. Is this compatible with the Sony FX6?

A: Yes, the RODE Wireless GO II is compatible with the Sony FX6.

Q: 7. How much bias power voltage will the transmitter-recorder provide to the lav mic input? Pro lav mics like the DPA or Countryman will require 3-5v.

A: The voltage of the microphone input on the transmitter within the Rode Wireless GO II 2-Person Compact Digital Wireless Omni Lavalier Microphone System/Recorder Kit is not made available by the manufacturer.

Q: 8. Original Go will work with Go2?

A: The original Rode Wireless Go and Wireless Go II systems use different technology and their components do not communicate with each other, so at this time, they can not be combined to use in the same system. This may be a possibility in the future if updates can be created that will enable compatibility between the older and brand new components. While the components can not be combined for use as one system, you can operate the original Wireless Go system (transmitter and receiver) and the Wireless Go II system (two transmitters and dual-channel receiver) at the same time. So if you need to mic three people, you can use both systems independently on the same set.

Q: 9. Does it work with panasonic Lumix S5?

A: Yes The Rode Go will work wth anything that has a 3.5mm microphone input, including the Lumix S5.

Q: 10. How many tested charges have these units been rated ?

A: The manufacturer has not provided any specifications regarding their testing of the number of charges that the internal batteries can withstand for the transmitters and receiver included with the Rode Wireless GO II 2-Person Compact Digital Wireless Omni Lavalier Microphone System/Recorder Kit.